American Ironhorse Tejas 2003
Model Tejas made in 2003 by American Ironhorse got 5 consumer complains as well as 1 recall. Consumer complaints with reference, among others things, to electrical system and engine and engine cooling. There was one recall concerning service brakes, hydraulic .
Model 2003
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR | ||||||||||||||||
03V521000 | AMERICAN IRONHORSE MOTORCYCLE COMPANY | from 08/01/2001 to 11/24/2003 | V (Vehicle) | 2395 | 01/26/2004 | MFR | AMERICAN IRONHORSE MOTORCYCLE COMPANY | 12/11/2003 | 12/18/2003 | |||||||
Defect Summary | On certain motorcycles equipped with optional brake rotor-carriers,the rotor-carriers can crack while in service and possibly break. | |||||||||||||||
Consequence Summary | This can cause a partial loss of the brake system or the potential for rotor-carrier detachment, which could result in a crash. | |||||||||||||||
Corrective Summary | Dealers will replace the rotor-carrier assembly. owner notification began january 26, 2004. owners should contact american ironhorse at 1-817-665-2045. | |||||||||||||||
Notes | Customers can also contact the national highway traffic safety administration |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
ELECTRICAL SYSTEM | |||
06/05/2005 | 0 | 1 | 03/21/2003 |
Dt*: the contact stated the rotor carrier part that held the brake was manufactured with weak metal that cracked. also, both handle bars had cracked and the rear drive pulley was worn. the ignition had also shorted and smoked. also, the odometer malfunctioned and no longer displayed the mileage. also, the rear tail light bulb melted to the lenses. the motorcycle was taken to the service dealer who determined that they could not fix any of the problems except the handle bars. both defective handle bars were replaced. the manufacturer was alerted and promised to replace other parts but had not. *ak updated 10/31/2006 - the handle bars cracked one week after being replaced. *nm | |||
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE - BELTS AND ASSOCIATED PULLEYS | |||
06/05/2005 | 0 | 1 | 03/21/2003 |
Dt*: the contact stated the rotor carrier part that held the brake was manufactured with weak metal that cracked. also, both handle bars had cracked and the rear drive pulley was worn. the ignition had also shorted and smoked. also, the odometer malfunctioned and no longer displayed the mileage. also, the rear tail light bulb melted to the lenses. the motorcycle was taken to the service dealer who determined that they could not fix any of the problems except the handle bars. both defective handle bars were replaced. the manufacturer was alerted and promised to replace other parts but had not. *ak updated 10/31/2006 - the handle bars cracked one week after being replaced. *nm | |||
EXTERIOR LIGHTING - TAIL LIGHTS | |||
06/05/2005 | 0 | 1 | 03/21/2003 |
Dt*: the contact stated the rotor carrier part that held the brake was manufactured with weak metal that cracked. also, both handle bars had cracked and the rear drive pulley was worn. the ignition had also shorted and smoked. also, the odometer malfunctioned and no longer displayed the mileage. also, the rear tail light bulb melted to the lenses. the motorcycle was taken to the service dealer who determined that they could not fix any of the problems except the handle bars. both defective handle bars were replaced. the manufacturer was alerted and promised to replace other parts but had not. *ak updated 10/31/2006 - the handle bars cracked one week after being replaced. *nm | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||
06/05/2005 | 0 | 1 | 03/21/2003 |
Dt*: the contact stated the rotor carrier part that held the brake was manufactured with weak metal that cracked. also, both handle bars had cracked and the rear drive pulley was worn. the ignition had also shorted and smoked. also, the odometer malfunctioned and no longer displayed the mileage. also, the rear tail light bulb melted to the lenses. the motorcycle was taken to the service dealer who determined that they could not fix any of the problems except the handle bars. both defective handle bars were replaced. the manufacturer was alerted and promised to replace other parts but had not. *ak updated 10/31/2006 - the handle bars cracked one week after being replaced. *nm | |||
STEERING - WHEEL AND HANDLE BAR | |||
06/05/2005 | 0 | 1 | 03/21/2003 |
Dt*: the contact stated the rotor carrier part that held the brake was manufactured with weak metal that cracked. also, both handle bars had cracked and the rear drive pulley was worn. the ignition had also shorted and smoked. also, the odometer malfunctioned and no longer displayed the mileage. also, the rear tail light bulb melted to the lenses. the motorcycle was taken to the service dealer who determined that they could not fix any of the problems except the handle bars. both defective handle bars were replaced. the manufacturer was alerted and promised to replace other parts but had not. *ak updated 10/31/2006 - the handle bars cracked one week after being replaced. *nm |
Car dealers selling
State | City | Zip | Name | Phone |
---|---|---|---|---|
MS | RIDGELAND | 39157 | GOT GEAR | 6012068880 |