Bmw 318 1993
Model 318 made in 1993 by Bmw got 17 consumer complains, 1 investigation there are 2 recalls as well as 2 service bulletins. Consumer complaints with reference, among others things, to air bags, electrical system and engine and engine cooling. Technical service bulletines regarding electrical system, exterior lighting. The car had one investigation (air bags). There was one recall concerning fuel system, gasoline . The car has one 1.8l engine.
Model 1993
| Engine [L] | Cylinders | Transmission | Drive | Estimate MPG (city/highway/combined) | Unadjusted MPG (city/highway/combined) | Fuel | Fuel cost | Class | Release date |
|---|---|---|---|---|---|---|---|---|---|
| ( 1.8L) | 4 | Automatic, 4 gears | RWD | 22/30/25 | 24/39/29 | Premium | $ 840 | 3 | 920901 |
| ( 1.8L) | 4 | Manual, 5 gears | RWD | 22/30/25 | 24/38/29 | Premium | $ 840 | 3 | 920901 |
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FUEL SYSTEM, GASOLINE - DELIVERY - HOSES, LINES/PIPING, AND FITTINGS | ||||||||||||||||
| 94V066000 | BAYERISCHE MOTOREN WERKE | from 06/01/1988 to 02/01/1993 | V (Vehicle) | 116300 | 06/25/1994 | ODI | BAYERISCHE MOTOREN WERKE | 04/11/1994 | 04/13/1994 | |||||||
| Defect Summary | Feed fuel hoses can harden and set over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. the clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose. | |||||||||||||||
| Consequence Summary | Fuel seepage between the feed fuel hose and the engine fitting can result in free fuel in the engine compartment, which could result in a fire when exposed to a source of ignition. | |||||||||||||||
| Corrective Summary | A redesigned feed fuel hose and hose clamp will be installed to alleviate the fuel seepage. | |||||||||||||||
| Notes | System: fuel; fuel line fittings; metallic.vehicle description: passenger vehicles; models 318i, 318si, 318ic, 325i, 325is, 325ix, 325ic, 525i, 535i, 735i and 735il.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge, or the remedy does not correct the defect or noncompliance, please contact bmw at 1-800-831-1117. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393. | |||||||||||||||
| FUEL SYSTEM, GASOLINE - FUEL INJECTION SYSTEM | ||||||||||||||||
| 94V037000 | BAYERISCHE MOTOREN WERKE | from 02/01/1992 to 01/01/1994 | V (Vehicle) | 23500 | 08/29/1994 | MFR | BAYERISCHE MOTOREN WERKE | 02/17/1994 | 03/01/1994 | |||||||
| Defect Summary | The adhesive material of the two piece throttle body heater migrates into the circulation chamber causing build up of impurities and restriction of flow within the chamber. this condition and water vapors from the crank that freezes at low ambient air temperatures prevents the throttle plate from closing as the driver releases the gas pedal, causing loss of throttle control. | |||||||||||||||
| Consequence Summary | If loss of throttle control from the frozen throttle body occurs while the vehicle is in motion, a vehicle crash could occur. | |||||||||||||||
| Corrective Summary | Bmw dealers will replace the throttle body heater with a modified heater. | |||||||||||||||
| Notes | System: fuel; fuel injection system.vehicle description: passenger vehicles, model 318i and 318is.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge or the remedy does not correct the defect or noncompliane, please contact bmw service center at 1-201-573-2100. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393. | |||||||||||||||
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ELECTRICAL SYSTEM - IGNITION - MODULE | |||||
| 120794(4116) | 01/01/1995 | 120194(3947) | 39114 | Engine will not start, primarily during cold weather or high altitude. *tw | 03/16/1995 |
| EXTERIOR LIGHTING - BRAKE LIGHTS | |||||
| MSG1016 | 10/01/1996 | 50897 | Recall 96v111 - this recall campaign involves the brake light switch. *tw | 06/17/1997 | |
Investigations
| NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
|---|---|---|---|---|---|---|
| AIR BAGS | ||||||
| EA95013 | BAYERISCHE MOTOREN WERKE | 03/31/1995 | 07/15/1996 | AIR BAG WIRING FAILURE | 96V110000 | |
| There is no summary currently available | ||||||
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| AIR BAGS - FRONTAL | |||
| 02/01/1995 | |||
| Consumer was in an accident the driver side air bag didn't deploy. tt | |||
| 06/23/1995 | |||
| Upon frontal impact estimated speed 25-30 mph, air bag failed to deploy. please describe details. tt | |||
| ELECTRICAL SYSTEM - WIRING | |||
| 01/26/1995 | 1 | ||
| Purchased car with bare wire exposed in wiring loom which could cause a fire. tt | |||
| ENGINE AND ENGINE COOLING - COOLING SYSTEM | |||
| 03/11/1998 | 1 | 02/01/1993 | |
| Engine lost coolant, engine melted, replaced engine. *ak | |||
| ENGINE AND ENGINE COOLING - ENGINE | |||
| 02/23/1999 | 02/01/1998 | ||
| Profile gasket leak. | |||
| 03/05/1998 | 02/01/1998 | ||
| Engine head gasket failed. | |||
| 05/06/1998 | 04/12/1993 | ||
| Engine timing case profile gasket failed, causing vehicle to suddenly veer from the third lane to the shoulder by the first lane. | |||
| 06/01/1997 | 08/15/1993 | ||
| Profile case gasket failed, causing all engine fluid to spill onto freeway at speed. this is a factory defect which needs to be addressed before it can cause a serious accident. *ak | |||
| 08/30/1997 | 01/27/1997 | ||
| Profile gasket failed, resulting in loss of anti-freeze. *ak | |||
| 05/16/1997 | 02/18/1997 | ||
| Profile gasket failed due to design problem, causing coolant leaks. *ak | |||
| While driving vehicle the engine timing case profile gasket failed, causing total loss of engine coolant.owner is very concerned for safety. *ak | |||
| 11/01/1996 | 04/15/1996 | ||
| Profile gasket failed/replaced. *ak | |||
| 07/16/1997 | 1 | 03/01/1997 | |
| Failed head gaskets caused vehicle to overheat. | |||
| 11/01/1996 | 1 | 05/01/1993 | |
| Timing case profile gasket failed, leaking antifreeze onto roadway. | |||
| 02/20/1997 | 03/01/1993 | ||
| Replaced the leaking timing case profile gasket. *ak | |||
| ENGINE AND ENGINE COOLING - ENGINE - GASOLINE - BELTS AND ASSOCIATED PULLEYS | |||
| 03/17/1995 | 1 | ||
| The engine belts are under engineered and they disintegrate. please explain. tt | |||
| SEAT BELTS - FRONT - BUCKLE ASSEMBLY | |||
| 02/01/1994 | |||
| Seat belt buckle will not lock, very hard to snap the buckle. tt | |||