Bmw 330xi 2002

Model 330xi made in 2002 by Bmw got 23 consumer complains, 17 investigations there is 1 recall as well as 6 service bulletins. Consumer complaints with reference, among others things, to electrical system, engine and engine and engine cooling. Technical service bulletines regarding exterior lighting, steering. The car had one investigation (exterior lighting). There was one recall concerning exterior lighting . The car has one 3 engine.

Model 2002

Engine [L]CylindersTransmissionDriveEstimate MPG (city/highway/combined)Unadjusted MPG (city/highway/combined)FuelFuel costClassRelease date
3 6Lockup/automatic, 5 gears417/25/2019.3747/31.6921/23.4815Premium1238COMPACT CARS
3 6Manual, 5 gears420/27/2322/34.9/26.3894Premium1077COMPACT CARS

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
EXTERIOR LIGHTING - BRAKE LIGHTS
11V438000BMW OF NORTH AMERICA, LLCfrom 09/01/2001 to 03/01/2005V (Vehicle)24100002/15/2012ODIBMW OF NORTH AMERICA, LLC08/26/201108/26/2011
Defect SummaryBmw is recalling certain model year 2002-2005 325i, 325xi, 330i, and 330xi vehicles manufactured from september 1, 2001, through march 1, 2005. over time, resistance in the electrical contacts may cause one or more rear lamp functions (tail light, brake light, and/or turn-signal), within the vehicle's body panel, to stop working.
Consequence SummaryIntermittent light operation reduces the ability to warn other motorists of the driver's intentions. this could cause a vehicle crash without warning.
Corrective SummaryBmw will notify owners, and dealers will repair the vehicles free of charge. the safety recall beganon february 15, 2012. owners may contact bmw customer relations and services at 1-800-525-7417.
NotesOwners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
EXTERIOR LIGHTING
SIB-63-02-0108/01/201010037025Ready04/27/2011
SIB-63-02-0108/01/201010037025Bmw: procedure for determining and replacing incandescent and halogen light bulbs under warranty. *rm04/27/2011
STEERING - ELECTRIC POWER ASSIST SYSTEM
SIB-32-04-0706/01/201010036979Ready04/25/2011
SIB-32-04-0706/01/201010036979Bmw: a new technical process has been created for bmw to identify causes of steering complaints with a wide range of models. *rm04/25/2011
STEERING - HYDRAULIC POWER ASSIST SYSTEM
SIB-32-04-0706/01/201010036979Ready04/25/2011
SIB-32-04-0706/01/201010036979Bmw: a new technical process has been created for bmw to identify causes of steering complaints with a wide range of models. *rm04/25/2011

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
EXTERIOR LIGHTING
EA09019BMW OF NORTH AMERICA, LLC12/18/200909/28/2011Rear Lamp Illumination11V438000
 In a letter submitted to the office of defects investigation (odi) dated august25, 2011, bmwindicated that it will conduct a voluntary recall campaign to remedy the subject vehicles.the issue involves the rear lamps in the vehicles body panel.through normal vehicle use over time, the rear lamps ground wiring and associated 8-pin connector can experience an increase of the resistance at the electrical contact points.this can lead to intermittent or permanent loss of the rear lamp functions which include tail, brake, and turn signal operation.the recall consists of modifying the rear lamps in the vehicles body panel by adding a secondary ground connection in parallel to the existing primary ground connection.an 8-pin connector that attaches the primary ground wiring to the rear lamp assembly will also be inspected and replaced if necessary.bmw will complete dealer notification in september 2011 and will begin owner notification in october 2011.all 3 series sedans (except for the m3 sedan which utilized a different rear lamp assembly) that were built between september 1, 2001 and march 1, 2005 are included in this recall, totalling approximately 241,000 vehicles.the action taken by bmw is sufficient to resolve the issues raised by this investigation.accordingly, this investigation is closed.
PE09036BAYERISCHE MOTOREN WERKE08/07/200912/22/2009REAR LAMP ILLUMINATION
 Odi has received complaints from consumers stating that their tail light assembly is not properly illuminating.the tail light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.the complainants have indicated that the issue is with an 8 pin connector and associated ground wiring.these components are allegedly overheating and melting due to excessive electrical current that runs through the system.bmw issued a technical service bulletin (tsb) sib-630306 on february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.odi is upgrading to an ea to further investigate the issue.
DP09002BAYERISCHE MOTOREN WERKE04/08/200908/06/2009REAR LAMP ILLUMINATION
 In march 2009, the office of defects investigation (odi) received a petition from mr. mark peters requesting an investigation of rear lamp failure in model year 2002-2005 bmw 3-series vehicles.an information request letter was sent to bmw in april 2009, and odi received bmw's response in june 2009.the tail lamp assembly contains lighting for the brake lamps, tail lamps, and turn signals.a technical service bulletin (tsb) was issued by bmw in january of 2007 instructing service technicians to examine an 8 pin electrical connector for heat-related damage and to incorporate additional ground wiring to the connector.complainants have alleged that significant thermal damage to the connector and associated ground wiring has occurred.this condition can result in intermittent or total loss of all lighting (brake, tail, and turn signal) for the effected rear lamp assembly.odi will open a preliminary evaluation to further examine this issue including further evaluating bmw complaints and related warranty data.
EA09019BAYERISCHE MOTOREN WERKE12/18/2009REAR LAMP ILLUMINATION
 The outboard rear light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.failure of the light assembly ground circuit results in loss of all three lamps.bmw submitted complaint and warranty information showing a significant number of rear lamp assembly failures due to an open ground connection at the eight pin connector of the light assembly.this results in the loss of the rear turn signal.overheating of the ground circuit electrical pin, possibly due to increased resistance and or high current flow, is indicated in some failures.additionally bmw issued a technical service bulletin (tsb) sib-630306 in february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.the additional ground wire added by the procedure reduces the current flow at the eight pin connector.odi is opening this ea to further investigate the issue.
EXTERIOR LIGHTING - BACK UP LIGHTS
DP09002BAYERISCHE MOTOREN WERKE04/08/200908/06/2009REAR LAMP ILLUMINATION
 In march 2009, the office of defects investigation (odi) received a petition from mr. mark peters requesting an investigation of rear lamp failure in model year 2002-2005 bmw 3-series vehicles.an information request letter was sent to bmw in april 2009, and odi received bmw's response in june 2009.the tail lamp assembly contains lighting for the brake lamps, tail lamps, and turn signals.a technical service bulletin (tsb) was issued by bmw in january of 2007 instructing service technicians to examine an 8 pin electrical connector for heat-related damage and to incorporate additional ground wiring to the connector.complainants have alleged that significant thermal damage to the connector and associated ground wiring has occurred.this condition can result in intermittent or total loss of all lighting (brake, tail, and turn signal) for the effected rear lamp assembly.odi will open a preliminary evaluation to further examine this issue including further evaluating bmw complaints and related warranty data.
EXTERIOR LIGHTING - BRAKE LIGHTS
EA09019BMW OF NORTH AMERICA, LLC12/18/200909/28/2011Rear Lamp Illumination11V438000
 In a letter submitted to the office of defects investigation (odi) dated august25, 2011, bmwindicated that it will conduct a voluntary recall campaign to remedy the subject vehicles.the issue involves the rear lamps in the vehicles body panel.through normal vehicle use over time, the rear lamps ground wiring and associated 8-pin connector can experience an increase of the resistance at the electrical contact points.this can lead to intermittent or permanent loss of the rear lamp functions which include tail, brake, and turn signal operation.the recall consists of modifying the rear lamps in the vehicles body panel by adding a secondary ground connection in parallel to the existing primary ground connection.an 8-pin connector that attaches the primary ground wiring to the rear lamp assembly will also be inspected and replaced if necessary.bmw will complete dealer notification in september 2011 and will begin owner notification in october 2011.all 3 series sedans (except for the m3 sedan which utilized a different rear lamp assembly) that were built between september 1, 2001 and march 1, 2005 are included in this recall, totalling approximately 241,000 vehicles.the action taken by bmw is sufficient to resolve the issues raised by this investigation.accordingly, this investigation is closed.
PE09036BAYERISCHE MOTOREN WERKE08/07/200912/22/2009REAR LAMP ILLUMINATION
 Odi has received complaints from consumers stating that their tail light assembly is not properly illuminating.the tail light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.the complainants have indicated that the issue is with an 8 pin connector and associated ground wiring.these components are allegedly overheating and melting due to excessive electrical current that runs through the system.bmw issued a technical service bulletin (tsb) sib-630306 on february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.odi is upgrading to an ea to further investigate the issue.
DP09002BAYERISCHE MOTOREN WERKE04/08/200908/06/2009REAR LAMP ILLUMINATION
 In march 2009, the office of defects investigation (odi) received a petition from mr. mark peters requesting an investigation of rear lamp failure in model year 2002-2005 bmw 3-series vehicles.an information request letter was sent to bmw in april 2009, and odi received bmw's response in june 2009.the tail lamp assembly contains lighting for the brake lamps, tail lamps, and turn signals.a technical service bulletin (tsb) was issued by bmw in january of 2007 instructing service technicians to examine an 8 pin electrical connector for heat-related damage and to incorporate additional ground wiring to the connector.complainants have alleged that significant thermal damage to the connector and associated ground wiring has occurred.this condition can result in intermittent or total loss of all lighting (brake, tail, and turn signal) for the effected rear lamp assembly.odi will open a preliminary evaluation to further examine this issue including further evaluating bmw complaints and related warranty data.
EA09019BAYERISCHE MOTOREN WERKE12/18/2009REAR LAMP ILLUMINATION
 The outboard rear light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.failure of the light assembly ground circuit results in loss of all three lamps.bmw submitted complaint and warranty information showing a significant number of rear lamp assembly failures due to an open ground connection at the eight pin connector of the light assembly.this results in the loss of the rear turn signal.overheating of the ground circuit electrical pin, possibly due to increased resistance and or high current flow, is indicated in some failures.additionally bmw issued a technical service bulletin (tsb) sib-630306 in february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.the additional ground wire added by the procedure reduces the current flow at the eight pin connector.odi is opening this ea to further investigate the issue.
EXTERIOR LIGHTING - TAIL LIGHTS
EA09019BMW OF NORTH AMERICA, LLC12/18/200909/28/2011Rear Lamp Illumination11V438000
 In a letter submitted to the office of defects investigation (odi) dated august25, 2011, bmwindicated that it will conduct a voluntary recall campaign to remedy the subject vehicles.the issue involves the rear lamps in the vehicles body panel.through normal vehicle use over time, the rear lamps ground wiring and associated 8-pin connector can experience an increase of the resistance at the electrical contact points.this can lead to intermittent or permanent loss of the rear lamp functions which include tail, brake, and turn signal operation.the recall consists of modifying the rear lamps in the vehicles body panel by adding a secondary ground connection in parallel to the existing primary ground connection.an 8-pin connector that attaches the primary ground wiring to the rear lamp assembly will also be inspected and replaced if necessary.bmw will complete dealer notification in september 2011 and will begin owner notification in october 2011.all 3 series sedans (except for the m3 sedan which utilized a different rear lamp assembly) that were built between september 1, 2001 and march 1, 2005 are included in this recall, totalling approximately 241,000 vehicles.the action taken by bmw is sufficient to resolve the issues raised by this investigation.accordingly, this investigation is closed.
EA09019BAYERISCHE MOTOREN WERKE12/18/2009REAR LAMP ILLUMINATION
 The outboard rear light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.failure of the light assembly ground circuit results in loss of all three lamps.bmw submitted complaint and warranty information showing a significant number of rear lamp assembly failures due to an open ground connection at the eight pin connector of the light assembly.this results in the loss of the rear turn signal.overheating of the ground circuit electrical pin, possibly due to increased resistance and or high current flow, is indicated in some failures.additionally bmw issued a technical service bulletin (tsb) sib-630306 in february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.the additional ground wire added by the procedure reduces the current flow at the eight pin connector.odi is opening this ea to further investigate the issue.
DP09002BAYERISCHE MOTOREN WERKE04/08/200908/06/2009REAR LAMP ILLUMINATION
 In march 2009, the office of defects investigation (odi) received a petition from mr. mark peters requesting an investigation of rear lamp failure in model year 2002-2005 bmw 3-series vehicles.an information request letter was sent to bmw in april 2009, and odi received bmw's response in june 2009.the tail lamp assembly contains lighting for the brake lamps, tail lamps, and turn signals.a technical service bulletin (tsb) was issued by bmw in january of 2007 instructing service technicians to examine an 8 pin electrical connector for heat-related damage and to incorporate additional ground wiring to the connector.complainants have alleged that significant thermal damage to the connector and associated ground wiring has occurred.this condition can result in intermittent or total loss of all lighting (brake, tail, and turn signal) for the effected rear lamp assembly.odi will open a preliminary evaluation to further examine this issue including further evaluating bmw complaints and related warranty data.
PE09036BAYERISCHE MOTOREN WERKE08/07/200912/22/2009REAR LAMP ILLUMINATION
 Odi has received complaints from consumers stating that their tail light assembly is not properly illuminating.the tail light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.the complainants have indicated that the issue is with an 8 pin connector and associated ground wiring.these components are allegedly overheating and melting due to excessive electrical current that runs through the system.bmw issued a technical service bulletin (tsb) sib-630306 on february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.odi is upgrading to an ea to further investigate the issue.
EXTERIOR LIGHTING - TURN SIGNAL
EA09019BMW OF NORTH AMERICA, LLC12/18/200909/28/2011Rear Lamp Illumination11V438000
 In a letter submitted to the office of defects investigation (odi) dated august25, 2011, bmwindicated that it will conduct a voluntary recall campaign to remedy the subject vehicles.the issue involves the rear lamps in the vehicles body panel.through normal vehicle use over time, the rear lamps ground wiring and associated 8-pin connector can experience an increase of the resistance at the electrical contact points.this can lead to intermittent or permanent loss of the rear lamp functions which include tail, brake, and turn signal operation.the recall consists of modifying the rear lamps in the vehicles body panel by adding a secondary ground connection in parallel to the existing primary ground connection.an 8-pin connector that attaches the primary ground wiring to the rear lamp assembly will also be inspected and replaced if necessary.bmw will complete dealer notification in september 2011 and will begin owner notification in october 2011.all 3 series sedans (except for the m3 sedan which utilized a different rear lamp assembly) that were built between september 1, 2001 and march 1, 2005 are included in this recall, totalling approximately 241,000 vehicles.the action taken by bmw is sufficient to resolve the issues raised by this investigation.accordingly, this investigation is closed.
PE09036BAYERISCHE MOTOREN WERKE08/07/200912/22/2009REAR LAMP ILLUMINATION
 Odi has received complaints from consumers stating that their tail light assembly is not properly illuminating.the tail light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.the complainants have indicated that the issue is with an 8 pin connector and associated ground wiring.these components are allegedly overheating and melting due to excessive electrical current that runs through the system.bmw issued a technical service bulletin (tsb) sib-630306 on february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.odi is upgrading to an ea to further investigate the issue.
EA09019BAYERISCHE MOTOREN WERKE12/18/2009REAR LAMP ILLUMINATION
 The outboard rear light assembly consists of a turn signal lamp, a tail lamp and a brake lamp.failure of the light assembly ground circuit results in loss of all three lamps.bmw submitted complaint and warranty information showing a significant number of rear lamp assembly failures due to an open ground connection at the eight pin connector of the light assembly.this results in the loss of the rear turn signal.overheating of the ground circuit electrical pin, possibly due to increased resistance and or high current flow, is indicated in some failures.additionally bmw issued a technical service bulletin (tsb) sib-630306 in february 2007 to address the condition by adding supplementary ground wiring to the tail lamp assembly.the additional ground wire added by the procedure reduces the current flow at the eight pin connector.odi is opening this ea to further investigate the issue.
DP09002BAYERISCHE MOTOREN WERKE04/08/200908/06/2009REAR LAMP ILLUMINATION
 In march 2009, the office of defects investigation (odi) received a petition from mr. mark peters requesting an investigation of rear lamp failure in model year 2002-2005 bmw 3-series vehicles.an information request letter was sent to bmw in april 2009, and odi received bmw's response in june 2009.the tail lamp assembly contains lighting for the brake lamps, tail lamps, and turn signals.a technical service bulletin (tsb) was issued by bmw in january of 2007 instructing service technicians to examine an 8 pin electrical connector for heat-related damage and to incorporate additional ground wiring to the connector.complainants have alleged that significant thermal damage to the connector and associated ground wiring has occurred.this condition can result in intermittent or total loss of all lighting (brake, tail, and turn signal) for the effected rear lamp assembly.odi will open a preliminary evaluation to further examine this issue including further evaluating bmw complaints and related warranty data.

Consumer Complaints


Fail datemilesoccurencesPurchase date
ELECTRICAL SYSTEM
02/10/200982000
 Failure of the general module 5 which results in failing to opening the door via the unlock button on the center console and key remote. this will also result in the double locking mechanism to activate to which passengers are unable to exit the vehicle properly either electronically or mechanically (manual locks do not work) forced to leave either through the window, trunk through rear seat if the car has this feature or possibly only through driver side door. this is a safety hazard, if the locks fail electronically the passengers inside should be able to trigger a mechanical way of exiting the vehicle.
ENGINE
05/22/201050000
 Tl* the contact owns a 2002 bmw 330xi. the contact was driving 65 mph when the vehicle independently decelerated to 30 mph. the vehicle was merged slowly to the shoulder and the engine was turned off. once the vehicle was restarted, there were several warning lights illuminated on the instrument panel. the vehicle was taken to the dealer and the dealer advised that the engine wiring harness would need to be replaced. the contact stated that the failure was recurring and previously when the failure occurred, the contact had the throttle body replaced, at the dealer
05/22/201050000
 Tl-the contact owns a 2002 bmw 330xi. the contact was driving 65 mph when the vehicle independently decelerated to 30 mph. the vehicle was merged slowly to the shoulder and the engine was turned off. once the vehicle was restarted, there were several warning lights illuminated on the instrument panel. the vehicle was taken to the dealer and the dealer advised that the engine wiring harness would need to be replaced. the contact stated that the failure was recurring and previously when the failure occurred, the contact had the throttle body replaced, at the dealer
ENGINE AND ENGINE COOLING - COOLING SYSTEM
07/16/20091500001
 My son parked his 2002 bmw 330xi in a parking lot early am to sleep. it caught on fire in approximately one and a half hours while idling, killing him. he was laying down in front seats. event was caught on surveillance camera, no foul play was detected. claimed to be accidental fire by police report. noticed 2001 bmw 3-series had major recall for same type of event with failure of cooling fans. *tr
EXTERIOR LIGHTING
01/01/201060000
 8-pin connector at rear tail lights in 2002 bmw 330xi has partially melted, contacts appear corroded. light out indicator light on the dash turns on and off intermittently.
(PWS)
05/22/201050000
 Tl-the contact owns a 2002 bmw 330xi. the contact was driving 65 mph when the vehicle independently decelerated to 30 mph. the vehicle was merged slowly to the shoulder and the engine was turned off. once the vehicle was restarted, there were several warning lights illuminated on the instrument panel. the vehicle was taken to the dealer and the dealer advised that the engine wiring harness would need to be replaced. the contact stated that the failure was recurring and previously when the failure occurred, the contact had the throttle body replaced, at the dealer
05/22/201050000
 Tl-the contact owns a 2002 bmw 330xi. the contact stated while driving 65 mph the vehicle suddelnly slowed to 30 mph. the vehicle was merged slowly to the shoulders and the engine turned off and on. there were several warning lights illuminated as it was restarted. he then drove to the dealer. the dealer kept the vehicle for over a week as this was a re-occurring problem. they informed him to replace the engine wiring harness would cost $2100. there are no recalls or warranty for this failure. the contact stated the vehicle had stalled previously and was towed to the dealer who stated this was a throttle body failure and repaired it. as the stalling re-occurred they are stating it was the engine wiring harness. the manufacturer was notified who offered no assistance. the failure mileage was 50,000 and the current mileage was 58,000. mw
SEATS
12/19/2008630001
 Passenger seat heater burning through leather seat cover into my pants and burning the underside of my thigh. there was visible smoke and a very strong burning smell. *tr
SUSPENSION - REAR
01/15/200955000
 Both rear springs have cracked/broken at approx 55,000 miles. this is a known issue. bmw will not warrantty a relacement set of springs.
TIRES
01/01/19011
 Safety defect with low profile tires and wheels. (nar) *mr *la *cb
VISIBILITY
08/11/2002100
 Tl- the contact owns a 2002 bmw 330xi. the contact stated they have had to replace the lift regulator and the power window motor on every window on the vehicle every six months since purchasing the vehicle. the contact is the original owner. . the dealer has stated this is a known issue, but the manufacturer stated the windows are the owners responsibility. the failure mileage was 100 and the current mileage was 63192.rl

Car dealers selling


StateCityZipNamePhone
NJWESTWOOD07675BMW OF NORTH AMERICA