Bmw F 650 Gs 2010
Model F 650 Gs made in 2010 by Bmw got 2 recalls as well as 8 service bulletins. Technical service bulletines regarding engine and engine cooling and equipment. There were some recalls concerningengine and engine cooling and service brakes, hydraulic.
Model 2010
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ENGINE AND ENGINE COOLING | ||||||||||||||||
09V499000 | BMW OF NORTH AMERICA, LLC | from 01/01/2008 to 12/10/2009 | V (Vehicle) | 4498 | 05/14/2010 | ODI | BMW OF NORTH AMERICA, LLC | 12/30/2009 | 12/30/2009 | |||||||
Defect Summary | Bmw is recalling certain model year 2008 through 2010 f650 gs and f800 gs motorcycles manufactured between january 2008 and december 2009. during engine operation, a vacuum is created in order to draw fresh air into the canister. this air then mixes with the fuel vapors captured by the canister, and is subsequently combusted. due to the routing of the ventilation hose, water near the end of the hose could be drawn into the charcoal canister. | |||||||||||||||
Consequence Summary | Water could flow into the canister causing a stalling condition increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will inspect and add an additional hose and route it such that the present defect is prevented. this remedy will be performed free of charge. the safety recall began on may 13, 2010. owners may contact bmw at 1-800-831-1117. | |||||||||||||||
Notes | Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . | |||||||||||||||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC | ||||||||||||||||
10V496000 | BMW OF NORTH AMERICA, LLC | from 01/11/2008 to 12/08/2009 | V (Vehicle) | 1780 | 01/13/2011 | MFR | BMW OF NORTH AMERICA, LLC | 10/18/2010 | 10/18/2010 | |||||||
Defect Summary | Bmw is recalling certain 2008 through 2010 f 650 gs motorcycles manufactured from january 11, 2008, through december 8, 2009. a washer may interfere with the front disc brake fasteners' torque. as a result, over time, a fastener or mutiple fasteners could become loose, allowing the brake disc to become loose. | |||||||||||||||
Consequence Summary | A loose brake disc may interfere with proper braking performance and may increase the risk of a crash. | |||||||||||||||
Corrective Summary | Bmw will notify owners and dealers will repair the vehicles free of charge. the safety recall began on january 13, 2011. owners may contact bmw at 1-800-525-7417. | |||||||||||||||
Notes | Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
ENGINE AND ENGINE COOLING - ENGINE | |||||
SB-13-001-10 | 07/01/2010 | 10034678 | Bmw motorcycle: replacing air filter element. on account of a fault in the production process, there is a possibility of cracks forming in the seals of the air filter elements. this fault is limited to air filter elements produced from 2 | 01/03/2011 | |
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE - TURBO-CHARGER | |||||
SIB-11-07-11 | 07/01/2011 | 10040845 | Bmw: loss of performance and turbocharger noise due to the oil supply restricted, causing oil starvation and resulting in the seizing of the turbocharger assembly. *rm | 09/13/2011 | |
SIB-11-07-11 | 07/01/2011 | 10040845 | Ready | 09/13/2011 | |
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - EMISSION CONTROL - CRANKCASE (PCV) | |||||
SIB-11-03-08 | 12/01/2010 | 10038217 | Ready | 06/10/2011 | |
SIB-11-03-08 | 12/01/2010 | 10038217 | Bmw: crankcase pressure diagnosis and information for all vehicles. *rm | 06/10/2011 | |
EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL | |||||
SB-13-001-10 | 07/01/2010 | 10034678 | Bmw motorcycle: replacing air filter element. on account of a fault in the production process, there is a possibility of cracks forming in the seals of the air filter elements. this fault is limited to air filter elements produced from 2 | 01/03/2011 | |
EXTERIOR LIGHTING | |||||
SIB-63-02-01 | 08/01/2010 | 10037025 | Bmw: procedure for determining and replacing incandescent and halogen light bulbs under warranty. *rm | 04/27/2011 | |
SIB-63-02-01 | 08/01/2010 | 10037025 | Ready | 04/27/2011 |