Bmw F 800 Gs 2008

Model F 800 Gs made in 2008 by Bmw got 3 recalls as well as 15 service bulletins. Technical service bulletines regarding electrical system and engine and engine cooling. There were some recalls concerningengine and engine cooling and power train.

Model 2008

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ENGINE AND ENGINE COOLING
09V499000BMW OF NORTH AMERICA, LLCfrom 01/01/2008 to 12/10/2009V (Vehicle)449805/14/2010ODIBMW OF NORTH AMERICA, LLC12/30/200912/30/2009
Defect SummaryBmw is recalling certain model year 2008 through 2010 f650 gs and f800 gs motorcycles manufactured between january 2008 and december 2009. during engine operation, a vacuum is created in order to draw fresh air into the canister. this air then mixes with the fuel vapors captured by the canister, and is subsequently combusted. due to the routing of the ventilation hose, water near the end of the hose could be drawn into the charcoal canister.
Consequence SummaryWater could flow into the canister causing a stalling condition increasing the risk of a crash.
Corrective SummaryDealers will inspect and add an additional hose and route it such that the present defect is prevented. this remedy will be performed free of charge. the safety recall began on may 13, 2010. owners may contact bmw at 1-800-831-1117.
NotesOwners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
08V692000BMW OF NORTH AMERICA, LLCfrom 09/27/2007 to 07/13/2008V (Vehicle)50901/15/2009MFRBMW OF NORTH AMERICA, LLC12/29/200812/29/2008
Defect SummaryBmw is recalling 509 my 2008 f650 gs and f800 gs motorcycles. the tightening of the chain sprocket fasteners may have resulted in various levels of torque being applied.
Consequence SummaryIt is possible for the fasteners to work loose from the sprocket, increasing the risk of a crash.
Corrective SummaryDealers will loosen and inspect the chain sprocket fasteners. those that have been damaged will be replaced. in all cases, the fasteners will be retightened. the recall is expected to begin during january 2009. owners may contact bmw at 1-800-831-1117.
NotesCustomers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
POWER TRAIN
10V274000BMW OF NORTH AMERICA, LLCfrom 09/27/2007 to 03/30/2009V (Vehicle)191608/30/2010MFRBMW OF NORTH AMERICA, LLC06/16/201006/18/2010
Defect SummaryBmw is recalling certain model year 2008 and 2009 f650 gs and f 800 gs motorcycles manufactured from september 27, 2007 through march 30, 2009. the drive chains may not have been produced to specification. as a result, over time the drive chain could break.
Consequence SummaryIf the broken chain becomes trapped between the rear wheel and the frame, the rear wheel could lock up, possibly resulting in a crash.
Corrective SummaryBmw will notify owners and dealers will replace the drive chain and sprockets on the affected motorcycles free of charge. the safety recall began on august 30, 2010. owners may contact bmw at 1-800-525-7417.
NotesOwners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ELECTRICAL SYSTEM - SOFTWARE
TB-00-015-0808/01/200810030770Bmw motorcycle: update of bms kp software to cip 12.0 or greater status. noticed that some f650/f800 gs (k72) motorcycles could display a tendency to stall when coasting or when the clutch is disengaged. no model years listed. *11/30/2009
ENGINE AND ENGINE COOLING - COOLING SYSTEM - HOSE
TSB-17-001-0903/01/200910029624Bmw motorcycle: the coolant inlet hose is not compliant with the applicable bmw specifications. engine operation can cause the inlet hose to widen and become correspondingly shorter; overtime this contraction in length can cause the hose to07/13/2009
ENGINE AND ENGINE COOLING - ENGINE
SB-22487806-0203/02/200910029705Bmw motorcycle: when disengaged, e.g. when changing gear or rolling the vehicle to a stop, the engine may cut out; when idling, the engine runs on only one cyclinder. (e series (k71; k72). no model years listed. *pe07/13/2009
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - EMISSION CONTROL - CRANKCASE (PCV)
SIB-11-03-0812/01/201010038217Bmw: crankcase pressure diagnosis and information for all vehicles. *rm06/10/2011
SIB-11-03-0812/01/201010038217Ready06/10/2011
EXTERIOR LIGHTING
SIB-63-02-0108/01/201010037025Bmw: procedure for determining and replacing incandescent and halogen light bulbs under warranty. *rm04/27/2011
SIB-63-02-0108/01/201010037025Ready04/27/2011
FUEL SYSTEM, OTHER
SB-00-021-0711/01/200710030825Bmw motorcycle: engine fuels containing ethanol. bmw motorrad has no objection to the use of si engine fuels containing up to a maximum of 10% ethanol and imposes no warranty restrictions. ethanol mixtures in proportions higher than 10%12/07/2009
FUEL SYSTEM, OTHER - STORAGE - TANK ASSEMBLY - PRESSURE RELIEF DEVICES
13-003-0806/01/200810026845Bmw motorcycle: replacement of fuel-pressure sensor. check of position of protective film (f-800 gs only). *pe12/29/2008
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR
SB-61-003-0810/01/200810028386Bmw vehicles: routing abs front wheel speed sensor cable. the wiring harness front wheel speed sensor periphery plug connection is mounted on the fork cover at the bottom. *pe03/27/2009
SERVICE BRAKES, AIR - DISC
SB-17927831-0202/25/200910029706Bmw motorcycle: wheel speed dependent, clearly audible clanking noise occurs when braking to adjust speed. e series (k25; k25/02; k25/03; k25/11; k25/12; k25/hp; k26; k27; k28; k29; k29/hp; k40; k41; k43; k43/hv; k44; k589/03; k71). no mod07/13/2009
SERVICE BRAKES, HYDRAULIC - ANTILOCK - WHEEL SPEED SENSOR
SB-61-003-0810/01/200810028386Bmw vehicles: routing abs front wheel speed sensor cable. the wiring harness front wheel speed sensor periphery plug connection is mounted on the fork cover at the bottom. *pe03/27/2009
STEERING - WHEEL AND HANDLE BAR
13-003-0806/01/200810026845Bmw motorcycle: replacement of fuel-pressure sensor. check of position of protective film (f-800 gs only). *pe12/29/2008
VEHICLE SPEED CONTROL - CABLES
SB-61-003-0810/01/200810028386Bmw vehicles: routing abs front wheel speed sensor cable. the wiring harness front wheel speed sensor periphery plug connection is mounted on the fork cover at the bottom. *pe03/27/2009
WHEELS
TSB 36-001-0904/01/200910029644Bmw motorcycle: the front wheel quick release axles that are not in compliance with the design specifications might be installed in some motorcycles. due to irregularities in the manufacturing process, in isolated cases the quick release ax07/13/2009