Bmw M3 1995

Model M3 made in 1995 by Bmw got 14 consumer complains there are 4 recalls as well as 5 service bulletins. Consumer complaints with reference, among others things, to air bags, engine and engine cooling and fuel system, gasoline. Technical service bulletines regarding engine and engine cooling, suspension and tires. There were some recalls concerningengine and engine cooling, seat belts and service brakes, hydraulic. The car has one 3.0l engine.

Model 1995

Engine [L]CylindersTransmissionDriveEstimate MPG (city/highway/combined)Unadjusted MPG (city/highway/combined)FuelFuel costClassRelease date
( 3.0L) 6Lockup/automatic, 5 gearsRWD19/28/2221/36/26Premium$ 9213950615
( 3.0L) 6Manual, 5 gearsRWD19/27/2221/35/25Premium$ 9213950615

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ENGINE AND ENGINE COOLING - COOLING SYSTEM
98V178000BAYERISCHE MOTOREN WERKEfrom 03/01/1991 to 11/30/1994V (Vehicle)34000003/31/1999MFRBAYERISCHE MOTOREN WERKE08/04/199808/14/1998
Defect SummaryVehicle description: passenger vehicles. a malfunction or failure of a coolant system component, such as a thermostat, water pump, or fan belt, can result in significantly increased coolant temperature and system pressure. if the indications of a critical overheating condition is not noticed by the driver, it is possible that damage to, or failure of, a coolant system component could occur.
Consequence SummaryIf a crack were to form or a seam were to separate in the heater core end piece, hot coolant could suddenly be expelled, increasing the risk of personal injury to a vehicle occupant.
Corrective SummaryDealers will install a new design radiator cap to control pressure and provide greater coolant overflow in the event of overheating.
NotesOwner notification began march 31, 1999. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1-800-831-1117.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
SEAT BELTS - FRONT - ANCHORAGE
94V151000BAYERISCHE MOTOREN WERKEfrom 09/01/1992 to 08/01/1994V (Vehicle)5700012/02/1994OVSCBAYERISCHE MOTOREN WERKE08/10/199408/18/1994571208
Defect SummaryIn a fmvss no. 208 30 miles-per-hour compliance test, an unbelted test driver dummy's chest maximum resultant acceleration was 70.8 g's, which exceeds the maximum allowable value of 60 g's. also, the unbelted passenger dummy's left femur maximum load was 2361 lbs, which exceeds maximum allowable value of 2250 lbs. the vehicles do not comply with fmvss no. 208, occupant crash protection.
Consequence SummaryConsequence of non-compliance: in the event of an accident, the occupant will be subjected to an increased risk of injury.
Corrective SummaryOn automatic transmission models only, the dealer will replace the transmission support crossmember with a crossmember used on the manual transmission model. also, the transmission rear bushing supports will be replaced with bushing having different performance characteristics. the steering column front support bearing at the firewall will be replaced with a modified part using a teflon inner surface and teflon spray will be applied to the column housing in the area of the bearing. a brace will be added between the knee bolster support and the steering column.
NotesSystem: interior systems; passive restraints; air bag; driver; fmvss n0. 208.vehicle description: passenger cars, models 325i, 325ia, 325is, 325sa, and m3.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time or the remedy does not correct the noncompliance, please contact bmw service center at 1-800-831-1117. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
96V111000BAYERISCHE MOTOREN WERKEfrom 01/01/1990 to 03/01/1994V (Vehicle)18000009/30/1996MFRBAYERISCHE MOTOREN WERKE07/01/199607/08/1996
Defect SummaryThe brake light switch can fail allowing the switch to remain in the brake lights off position or in the brake lights on position.
Consequence SummaryIf this happens, the brake lights either will not operate or will be continuously on, regardless of brake pedal position. following drivers would not be able to determine whether the vehicle is stopping, increasing the potential for a vehicle accident.
Corrective SummaryDealers will replace the existing brake light switch with a newly designed switch.
NotesSystem: brakes; hydraulic; switch; brake light. vehicle description: passenger vehicles. owner notification: owner notification is expected to begin august 5, 1996. note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1-800-831-1117. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
VEHICLE SPEED CONTROL
97V131000BAYERISCHE MOTOREN WERKEfrom 03/01/1994 to 07/30/1997V (Vehicle)41000010/30/1997MFRBAYERISCHE MOTOREN WERKE08/19/199708/29/1997
Defect SummaryThe cruise control and throttle cables are attached to the same throttle valve actuating lever at the throttle housing. it is possible that the plastic bushing on either cable could break due to environmental influences coupled with vibration. if the bushing breaks, the outer cable housing can separate from the bushing. in this case, during application of the throttle pedal without cruise control being engaged, the outer tube could catch on the edge of the broken bushing.
Consequence SummaryThis could cause the throttle valve to remain partially open. it his were to occur, the car might not decelerate as expected increasing the risk of a vehicle crash.
Corrective SummaryDealers will install a spring steel clip on the outer tube of each cable in the area of the adjusting screw and plastic bushing. the clip is designed to prevent the outer tube from dislodging from the bushing.
NotesOwner notification is expected to begin by the end of october 1997. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1-800-831-1117.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING
SI-B11-07-0908/01/200910030850Bmw: thermostat housing inspection. the retaining springs of the thermostat housing quick release couplings for the coolant hoses may not be locked correctly. this situation may result in a coolant leak. models affected are m3 sedan (e12/09/2009
ENGINE AND ENGINE COOLING - COOLING SYSTEM - HOSE
SI-B11-07-0908/01/200910030850Bmw: thermostat housing inspection. the retaining springs of the thermostat housing quick release couplings for the coolant hoses may not be locked correctly. this situation may result in a coolant leak. models affected are m3 sedan (e12/09/2009
SUSPENSION - REAR - AXLE - NON-POWERED AXLE ASSEMBLY
SIB-33-01-0207/01/201110040853Ready09/13/2011
SIB-33-01-0207/01/201110040853Bmw: a grinding noise is coming from the differential during slow cornering. when turning a slip/stick effect is created on the lining and steel discs incorporated in the differential clutch causes a grinding noise. *rm09/13/2011
TIRES
36 01 9803/01/1998600876Subject pertaining to michelin pilot sx mxx3 tires in 235/40 zr 17 and 225/45 zr 17 sizes. *yc06/10/1998

Consumer Complaints


Fail datemilesoccurencesPurchase date
AIR BAGS
04/02/2009870001
 Airbag warning light stays on for 2 minutes; common problem for 1995 3 series according to internet forum (http://www.fixya.com/cars/t595499-airbag_light). *tr
AIR BAGS - FRONTAL
05/14/19961
 No deployment of driver's air bag in rear-end accident, resulting in injuries. *ak
05/14/19961
 No deployment of passenger's ait bag in rear-end collision. *ak
ENGINE AND ENGINE COOLING - COOLING SYSTEM
03/02/1995184511
 Safety recall 98v-178; regarding the 1995 bmw m3. the vehicle has been service eleven times for repairs and maintenance for the cooling system.***no answer required***. *mr when the failure occurred, hot coolant was expelled onto the windshield and into the passenger cabin through the open window and sunroof. the consumer received minor burns and irritation to his skin. the vehicle was towed to the dealer where the radiator, water pump, thermostat, housing, related gaskets and connectors were replaced. the consumer stated he never received a recall notice even though the problem he experienced was stated in the recall. *jb
FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY
 Vehicle is leaking fuel and there are smells of gas vapors when parked in the garage. dealer has fixed vehicle for same problem before. dealer replaced fittings in the sending unitbut, problem still exists. *ak
SEAT BELTS - FRONT - BUCKLE ASSEMBLY
11/10/2005175000304/05/1995
 I owed this 1995 bmw m3 since new and abs and airbag light comes on very frequently. abs: need to replace abs pump and abs module. airbag: need to replace safety seat belt buckle. *nm
SERVICE BRAKES, HYDRAULIC
08/12/20021
 The vehicle experienced extended stopping, and there was a noise coming from the brakes when they were applied.*dt *jb
SERVICE BRAKES, HYDRAULIC - ANTILOCK
 Abs system fails, locking up the back up system with uneven braking, resulting in both right front and right rear tires locking up, causing vehicle to pull almost into a circle. dealership aware of problem from previous owner. diagnostic computer at dealership unable to detect cause. please describe details. *ak
SERVICE BRAKES, HYDRAULIC - ANTILOCK - CONTROL UNIT/MODULE
11/10/2005175000304/05/1995
 I owed this 1995 bmw m3 since new and abs and airbag light comes on very frequently. abs: need to replace abs pump and abs module. airbag: need to replace safety seat belt buckle. *nm
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
05/14/19961
 When a slower vehicle cut in front of car, driver hit brakes, but vehicle spinned, lost control and smashe dinto concrete carrier. *ak
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
09/14/20041
 While applied the brakes the brake light failed to come on. the driver has placed refuses on more than one occasion the problem still remained. the driver was able to drive it to the dealer for inspection. the mechanic informed the driver brake light which needed replacement but the campaign bullentin was not for this vehicle. please fill in additional information.
STEERING - HYDRAULIC POWER ASSIST SYSTEM
08/18/2002
 While driving at 55mph and with no warning vehicle was sideswiped, resulting in a rollover. dealer will be notified.*ak
SUSPENSION - REAR
06/19/2003102207/26/1997
 Passenger side rear shock torn out from the shock tower. stress cracks in the driver side rear shock tower with failure imminent. i can provide pictures of the shock towers before and after they were taken out of the car as well as the shock towers themselves. i have found many examples of the same problem on bmw m3's reported on national e-mail lists. i can provide copies of the e-mails.*jb
SUSPENSION - REAR - SPRINGS
08/01/2001102/01/2000
 Bottom of drivers side coil spring failed - broke completely and rattling around in lower support. could not identify rattle for a long time until recently. most probable cause of failure this early in the service life of the part was the manufacturing process or materials used. if the spring had failed in the middle, the consequences could have been more severe. since the part broke at such low mileage, i think the manufacturer should replace the unit at their expense.*ak

Car dealers selling


StateCityZipNamePhone
TXHOUSTONDON MCGILL IMPORTS