Bmw R 1200 St
Model R 1200 St made by Bmw got 13 consumer complains, 1 investigation there are 3 recalls as well as 5 service bulletins. Consumer complaints with reference, among others things, to fuel system, gasoline, power train. Technical service bulletines regarding engine and engine cooling, exterior lighting and fuel system, other. The car had one investigation (fuel system, gasoline). There were some recalls concerningengine and engine cooling, service brakes, hydraulic.
Model 2005
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ENGINE AND ENGINE COOLING | ||||||||||||||||
05V172000 | BMW OF NORTH AMERICA, LLC | from 12/01/2004 to 03/03/2005 | V (Vehicle) | 500 | 05/10/2005 | MFR | BMW OF NORTH AMERICA, LLC | 04/27/2005 | 04/27/2005 | |||||||
Defect Summary | On certain motorcycles, exposure of the throttle housing to road debris could fall and become caught between the throttle-body and the engine block. | |||||||||||||||
Consequence Summary | This could restrict movement of the throttle-cable pulley that, in turn, could affect throttle operation and increase the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will install a cover over the throttle-cable pulley free of charge. the recall began on may 10, 2005. owners may contact bmw at 1-800-831-1117. | |||||||||||||||
Notes | Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. | |||||||||||||||
SERVICE BRAKES, HYDRAULIC | ||||||||||||||||
06V134000 | BMW OF NORTH AMERICA, LLC | from 12/01/2004 to 01/31/2006 | V (Vehicle) | 9260 | 06/05/2006 | MFR | BMW OF NORTH AMERICA, LLC | 04/24/2006 | 04/25/2006 | |||||||
Defect Summary | On certain motorcycles, if certain procedures are performed that involves removal of the front left brake caliper, the abs sensor cable can be routed incorrectly and when the caliper is reinstalled, the sensor cable can come into contact and rub against the front brake disc. overtime, if the chafing becomes severe, it is possible to lose the abs function. | |||||||||||||||
Consequence Summary | Loss of abs function could increase the risk of a crash during certain riding conditions. | |||||||||||||||
Corrective Summary | Dealers will attach additional retaining clips free of charge to the abs sensor cable, which will provide a more secure connection to the wheel carrier. the recall began on june 5, 2006, and will be a phased mailing through october 2006. owners may contact bmw at 1-800-831-1117. | |||||||||||||||
Notes | Customers may also contact the national highway traffic safety administration | |||||||||||||||
SERVICE BRAKES, HYDRAULIC - ANTILOCK | ||||||||||||||||
06V164000 | BMW OF NORTH AMERICA, LLC | from 02/01/2005 to 11/30/2005 | V (Vehicle) | 13200 | 06/05/2006 | MFR | BMW OF NORTH AMERICA, LLC | 05/15/2006 | 05/17/2006 | |||||||
Defect Summary | On certain motorcycles, under rapid, repeated, and unusually harsh braking, loss of abs capability could temporarily occur. | |||||||||||||||
Consequence Summary | Temporary loss of abs braking could increase the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will add a physical restriction, in the form of a banjo bolt with a flow restrictor to the brake line, and on certain models dealers will install new front brake discs of a slightly larger thickness free of charge. the recall began on june 5, 2006, and will be a phased mailing through october 2006. owners may contact bmw at 1-800-831-1117. | |||||||||||||||
Notes | Customers may also contact the national highway traffic safety administration |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
ENGINE AND ENGINE COOLING - ENGINE | |||||
00-004-08 (018) | 07/01/2008 | 00-004-08 (018)R | 10026302 | Bmw motorcycle: complaints relating to knocking noises (engine pinging) and sporadic perceptible flat-spots (especially under sharp acceleration). models k2x and up to year 2007 onward. *pe updated 1/27/09. *pe | 10/16/2008 |
EXTERIOR LIGHTING | |||||
SIB-63-02-01 | 08/01/2010 | 10037025 | Ready | 04/27/2011 | |
SIB-63-02-01 | 08/01/2010 | 10037025 | Bmw: procedure for determining and replacing incandescent and halogen light bulbs under warranty. *rm | 04/27/2011 | |
FUEL SYSTEM, OTHER | |||||
SB-00-021-07 | 11/01/2007 | 10030825 | Bmw motorcycle: engine fuels containing ethanol. bmw motorrad has no objection to the use of si engine fuels containing up to a maximum of 10% ethanol and imposes no warranty restrictions. ethanol mixtures in proportions higher than 10% | 12/07/2009 | |
SERVICE BRAKES, AIR - DISC | |||||
SB-17927831-02 | 02/25/2009 | 10029706 | Bmw motorcycle: wheel speed dependent, clearly audible clanking noise occurs when braking to adjust speed. e series (k25; k25/02; k25/03; k25/11; k25/12; k25/hp; k26; k27; k28; k29; k29/hp; k40; k41; k43; k43/hv; k44; k589/03; k71). no mod | 07/13/2009 |
Investigations
NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
---|---|---|---|---|---|---|
FUEL SYSTEM, GASOLINE - DELIVERY - FUEL PUMP | ||||||
PE12036 | BMW of North America, LLC | 11/16/2012 | Fuel Leak - Motorcycle | |||
Numerous owners report to both the office of defects investigation and in internet forums, the fuel pump housing cracks in the moulded outlet fitting area of their motorcycle.this housing seals the top of the fuel tank and a crack in this housing can potentially result in a fuel leak.to assess the frequency and severity of the issue, this office is opening a preliminary evaluation.the odi complaints cited above can be viewed at www-odi.nhtsa.dot.gov/complaints under the following odi identification numbers: 10449393, 10457823, 10475150, 10471642, 10356156, 10433733, 10442023, 10445888, 10453738, 10474390, 10417320, 10444876, 10444670, 10448104, 10425962, 10430734, 10443840, 10448325, 10471518, 10451907, 10433589, 10430822, 10467136, 10445954, 10432269, 10437222, 10444742, 10452476. |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
FUEL SYSTEM, GASOLINE | |||
05/28/2011 | 8000 | ||
1) smelled fuel while riding, saw fuel leaking onto hot motor, stopped immediately. 2) a plastic quick-disconnect coupler had cracked allownig fuel at high pressure to spray onto hot motorcycle engine. air cooled motor, extreme fire risk. 3) bmw part # is 13537674765, made by colder products company. part is plastic, becomes brittle and cracks or breaks off on the male side of connector. thre are two lines (feed & return) second plastic coupler broke off duing disassembly. cpc also makes the exact same quick- coupler in crome plated brass, i replaced both plastic connectors with metal ones. total cost of repair was less than $100 including new clamps & o-rings. i have the old parts, but this is a common problem, known to bmw and many have failed. all bmw r1200rt, r1200st, r1200gs models have these fuel line quick-disconnects sitting on top of the motor connecting the fuel tank. they should be recalled before someone burns to death on their bike. | |||
03/26/2011 | 28837 | ||
I own a 2005 bmw r1200st motorcycle, it has 28,837 miles on it and the quick disconnects for the fuel tank are plastic and will/do break unexpectadly. thus upon noticing this condition i proceeded to replace the plastic with steel parts where as when the male to female threaded plug was changed the plastic fuel pump housing cracked and rendered the motorcycle inoperable until a replacement fuel pump can be shipped from germany.this transfers the fuel under pressure to the efi and when turned on with the crack sprays/leaks fuel over the side of the motorcycle onto the hot exhaust. the motorcycle was trailered to the dealer where the part was ordered from germany with a two week wait at the price of $475.00 plus s&h and installation charges yet to be determined. | |||
POWER TRAIN - AXLE ASSEMBLY | |||
10/19/2007 | 15750 | 1 | 05/14/2006 |
Interference fit wheel adapter on final drive axle tube lost it's proper fit causing the rear wheel to develop a wobble greater than 1 mm (3 mm) at 15,750 miles and 18 months of use. wheel created a handling problem. a new splined adapter was interference fit to the existing axle tube spline on the final drive. *tr | |||
POWER TRAIN - DRIVELINE - DRIVESHAFT | |||
12/12/2007 | 35000 | 1 | 09/15/2005 |
Bmw 2005 r1200st final drive failure. *tr |
Car dealers selling
State | City | Zip | Name | Phone |
---|---|---|---|---|
GA | MARIETTA | 30060 | BMW MOTORCYCLES OF ATLANTA | 7709849844 |
MO | KANSAS CITY | ENGLE MOTORS |