Bmw S 1000 Rr 2012

Model S 1000 Rr made in 2012 by Bmw got 6 consumer complains there are 2 recalls as well as 4 service bulletins. Consumer complaints with reference to engine. . Technical service bulletines regarding electrical system, fuel system, gasoline and (pws). There were some recalls concerningengine and engine cooling, structure.

Model 2012

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ENGINE AND ENGINE COOLING - ENGINE
12V177000BMW OF NORTH AMERICA, LLCfrom 09/01/2011 to 04/10/2012V (Vehicle)1414MFRBMW OF NORTH AMERICA, LLC04/20/201204/20/2012
Defect SummaryBmw is recalling certain model year 2012 s1000rr motorcycles, manufactured from september 1, 2011, through april 10, 2012. due to a manufacturing process error, the connecting rod bolts may become loose during high engine temperatures and/or high engine operating speeds which could result in catastrophic engine damage.
Consequence SummaryIn the event of engine damage, escaping oil could cause handling issues, increasing the risk of a crash.
Corrective SummaryBmw will notify owners, and dealers will replace the connecting rod bolts free of charge. the safety recall is expected to begin during may 2012. owners may contact bmw customer relations and services at 1-800-525-7417.
NotesCustomers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
STRUCTURE - MOTORCYCLE KICKSTAND/CENTER STAND
12V585000BMW of North America, LLC V (Vehicle)238501/29/2013MFRBMW of North America, LLC12/14/201212/14/2012
Defect SummaryBmw is recalling certain model year 2012-2013 s 1000 rr motorcycles manufactured september 2011, through december 2012. due to a manufacturing fault, the side-stand attachment bolts could start to loosen. the loosening of the side-stand bolts could cause the stand to separate from the frame of the motorcycle.
Consequence SummaryA separation of the side-stand could cause the motorcycle to fall, causing a risk of injury.
Corrective SummaryBmw will notify owners, and dealers will clean the sidestand mounting plate threads and replace the side-stand mounting plate bolts, free of charge. the recall began on january 29, 2013. owners may call bmw at 1-800-525-7417 or email bmw at customerrelations@bmwusa.com.
NotesOwners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ELECTRICAL SYSTEM
SIB-12-18-1211/01/201210049679Bmw: if bsd communication is disrupted, oil level sensor data is no longer received by dme. bsd communication fault(s), after repairs are shortly set, requires removal of ignition harness from cylinder head cover. all models. no model01/18/2013
FUEL SYSTEM, GASOLINE
SB-121410/12/201210049439Bmw: vehicles needs diagnosing for n63 misfire faults when service engine soon lamp is illuminated. lack of diagnosing engine or fuel system could cause incorrect diagnosis and repeated repair attempts. no models or model years listed.01/15/2013
(PWS)
SIB-12-18-1211/01/201210049679Bmw: if bsd communication is disrupted, oil level sensor data is no longer received by dme. bsd communication fault(s), after repairs are shortly set, requires removal of ignition harness from cylinder head cover. all models. no model01/18/2013
SB-121410/12/201210049439Bmw: vehicles needs diagnosing for n63 misfire faults when service engine soon lamp is illuminated. lack of diagnosing engine or fuel system could cause incorrect diagnosis and repeated repair attempts. no models or model years listed.01/15/2013

Consumer Complaints


Fail datemilesoccurencesPurchase date
ENGINE
06/28/20122100
 Tl* the contact owns a 2012 bmw s100 rr motorcycle. the contact stated that the vehicle was included in nhtsa campaign id number:12v177000 (engine and engine cooling: engine) and was serviced under the recall. after the repairs, the vehicle stalled without warning. the vehicle was not taken to the dealer for inspection or repair. the manufacturer was not contacted. the failure and the current mileage was 2,100.
06/28/20122100
 Tl-the contact owns a 2012 bmw s100 rr motorcycle. the contact stated that the vehicle was included in nhtsa campaign id number:12v177000 (engine and engine cooling: engine) and was serviced under the recall. after the repairs, the vehicle stalled without warning. the vehicle was not taken to the dealer for inspection or repair. the manufacturer was not contacted. the failure and the current mileage was 2,100. kmj
05/12/2012800
 Tl-the contact owns a 2012 bmw s1000rr motorcycle. the contact stated that while riding 55 mph, the connecting rod punched a hole through the engine block causing oil and antifreeze to leak all over the contact and the road. in addition, the oil leaked on the rear tires causing them to seize and the contact almost lost control of the vehicle. the contact merged the vehicle off the highway where it was towed to the dealer. the contact sustained injuries to the neck and back as a result of the failure. the manufacturer was notified who stated that they would contact him within the next seven days. the contact was awaiting a return call from the dealer. the failure mileage was 800. kmj
05/12/2012800
 Tl-the contact owns a 2012 bmw s1000rr motorcycle. the contact stated while riding 55 mph the connecting rod punch a hole through the engine block causing oil and antifreeze to leaked out all over the contact and the road. the oil leaked on the rear tires causing it to lock and the contact almost lost control. the contact merged the motorcycle to the side of the road where it was towed. the dealer was notified who came and retrieve the motorcycle. the contact stated he has neck and back injuries. the manufacturer was notified who stated they will contact him within the next seven days. the failure mileage was 800. mw