Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ENGINE AND ENGINE COOLING | |||||
| 10042002 | 10/04/2002 | 10013253 | Cam drive idler and tensioner pulley and water pump inspect replace program. *eh | 04/13/2005 | |
| 010602009 | 09/01/2001 | 623880 | Some owners may comment on a loss of coolant, low coolant light on, and / or engine overheating. *tt | 10/31/2001 | |
| 010602005 | 07/01/2001 | 620831 | A condition may exist where the temperature gauge reads in the red zone and / or the overheat light is on. the vehicles does not overheat. *tt | 08/31/2001 | |
| ENGINE AND ENGINE COOLING - COOLING SYSTEM | |||||
| 02041A | 10/28/2002 | 02041 | 10000187 | Dealer information regarding customer satisfaction program 02041 - cam drive idler and tensioner pulleys, and water pump. *tt | 02/14/2003 |
| 02041A | 10/01/2002 | 02041 | 10000186 | Cam drive idler and tensioner pulleys and water pump. *tt | 02/14/2003 |
| 010602008 | 08/01/2001 | 624620 | Revision of cooling fan and motor replacement- auxiliary procedure *jg | 11/08/2001 | |
| ENGINE AND ENGINE COOLING - COOLING SYSTEM - RADIATOR ASSEMBLY | |||||
| 010602004 | 07/01/2001 | 624588 | Subject regarding revised thermostat replacement and installation procedures. *tt | 11/08/2001 | |
| ENGINE AND ENGINE COOLING - ENGINE | |||||
| 02041A | 11/22/2002 | 10000470 | Customer satisfaction program - cam drive idler and tensioner pulleys and water pump - back order. *tt | 02/27/2003 | |
| ENGINE AND ENGINE COOLING - ENGINE - GASOLINE | |||||
| 200601 | 06/20/2001 | 623743 | Subject regarding coolant leaks at the engine oil cooler cover. *tt | 10/30/2001 | |
| ENGINE AND ENGINE COOLING - ENGINE - GASOLINE - BELTS AND ASSOCIATED PULLEYS | |||||
| 02041A | 10/31/2002 | 10009579 | Customer satisfaction program 02041 - cam drive idler and tensioner pulleys, and water pump. kit information. *tt | 10/07/2004 | |
| ENGINE AND ENGINE COOLING - EXHAUST SYSTEM | |||||
| 3636 | 10018603 | Dtc p0411 set for low flow detected from the secondary air injection (sai) system (air pump). | 01/06/2006 | ||
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| ENGINE AND ENGINE COOLING - COOLING SYSTEM | |||
| 04/24/2009 | 62580 | 1 | |
| Chronic failure of gm pn# 90566947 causing loss of coolant and possible fire damage due to proximity of exhaust manifold and catalytic converter. there have been 3 replacements in 62,580 miles. the first @ 16,586 miles, second @ 34,503 miles, and the latest at 62,580 miles. the leaks begin as an odor of coolant, then spots begin on the pavement, then finally the coolant reservoir empties itself. the valve is located at the rear of the engine block up against the firewall, and adjacent to the exhaust pipe on the passenger side. the part has been replaced all 3 times, once under warranty and twice at my expense. gm refuses to acknowledge a design problem, even though this is not a maintenance part. it is constructed from plastic and does not withstand the hot environment of the application. it is used on the 3 litre 6 cylinder engine of the cadillac catera and cts, and the saab 9-5. dealer use records show a very high incidence of failure even though there are not that many vehicles using this engine. there is a possibility of fire due to the coolant spraying on the catalytic converter when moving, as well as disabling the engine due to the loss of coolant. *tr | |||
| 05/21/2007 | 74900 | 2 | 10/08/2001 |
| The purpose of this memo is to request nhtsa to evaluate and take appropriate action to have the manufacturer correct design defect in the hot water valve of the 2001 cadillac catera cooling system. *ak recently the hot water valve, fp number 90566947, in the cooling system of my 2001 catera failed for the second time. the first failure occurred in 2005 with less than 50,000 miles on the car and was repaired under warranty. the second failure occurred last month with less than 75,000 miles on the car and was repaired at my expense. both repairs were performed by val ward cadillac, fort myers, florida, where i purchased the vehicle. i have owned many cars, including four general motors (gm) cars, and this cooling system problem has never occurred on any of them. on june 5, 2007 i sent a letter to gm asking that they issue a recall of the 2001 catera to correct this design defect. i was advised, via a telephone call from ms. jolene blazukiewicz, in their executive office, that gm does not believe this is a design defect or safety hazard and no recall has been issued. she went on to say the failed part is made of plastic, as though this was a reason for the failure. i suggested they may want to consider making the part from a stronger material, she said she would forward my letter to the design department. i live in a relatively rural part of central florida and sudden loss of cooling fluid on a road far from a town or service station, could present a very real and significant safety hazard and result in severe engine damage. the fact that this valve has now failed twice indicates it is a design defect. it would seem appropriate for general motors to issue a recall and replace the valve with a more robust part. i therefore request the nhtsa to evaluate the problem and, if appropriate, direct gm to issue a recall for the replacement of the defective part. sincerely, torsten rothman | |||
| 08/20/2005 | 35000 | 3 | 08/26/2003 |
| On 8/20/05, i have filed a complaint (file # 1-357-445-124) with cadillac customer relations, in order to request full reimbursement for repair of two safety-related issues and one service-related issue that have come to my knowledge recently. i believe these issues did not happened overnight and have been developing prior to the expiring of the warranty in december 2004. car has only 35k miles and is driven avg of 4k miles per year. complaint is as follows: 1) defective original factory chrome rims: as per tires plus and lindsay cadillac service shop technicians, the chrome is peeling from inside rim, causing tires to constantly lose air (deflate), which at any time may be a hazard to my safety, as well as for other passengers). i have asked cadillac to repair/replace 4 rims; 2) defective car jack: although not previously used, on 8/19/05 the new jack slid and bended when i used it according to instructions to replace a flat tire, almost causing personal injury and car damage). i have asked cadillac to replace defective jack; and, 3) leaking engine coolant: according to lindsay's cadillac dealership diagnosis, engine coolant is leaking through water heater control valve (as per archives from www.cadillacforums.com, this seems to be a known and recurring issue reported by cadillac catera owners, and should be addressed under cadillac's warranty and they should assume the cost of repairs). cadillac pressured me over the phone to take 50% cost assistance on repairs (approx $3,500.00 estimated), and when i refused, offer was withdrawn from the table. i complained that process was not transparent, and when i requested that cadillac's offer and claim information be in writing, representative refused to provide me with copies of case file. *jb | |||
| 1 | |||
| There was a recall regarding a defective water pump, timing belt and engine pulley, however the dealer only replaced the water pump.*jb *jb | |||
| ENGINE AND ENGINE COOLING - ENGINE | |||
| 06/28/2009 | 92000 | 3 | |
| Tl*the contact owns a 2001 cadillac catera. since may of 2009, the vehicle stalls while driving 45 mph or greater. initially, the stalling occurred occasionally. ever since the vehicle was repaired on june 28, 2009, the stalling occurs every other day. the contact feels that this is a serious safety issue. the failure mileage was 92,000. updated 08/04/09 *bf the mechanic stated the crankshaft sensor was causing the vehicle to shut down. updated 08/05/09.*jb | |||
| ENGINE AND ENGINE COOLING - ENGINE - GASOLINE | |||
| While traveling at normal speed and without any indication vehicle stalled. dealer has been contacted. please provide further information. *ak | |||
| 01/18/2002 | 1 | 12/01/2001 | |
| Vehicle was leaking oil, the consuemr was told that the vehicle had a loose screw, the vehicle stalled while driving due to a faulty computer chip, the dealer reset and upgraded the chip, while backing up and when coming to a stop the vehicle makes noise, the dealer has been unable to duplicate the problem but lubricated the plastics around and inside the car, this minimize the noise but it still can be heard. nlm | |||