Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, HYDRAULIC - POWER ASSIST
97050173501905/01/199753015When brakes are depressed force or engine load may affect and cause various noises. *yc11/06/1997

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, HYDRAULIC - ANTILOCK
04/20/200189000403/15/1999
 Dt: while driving caller tries to slow down and without warning the brakes lose power. while at the stop light it accelerates, and she has to fight the car to keep it stopped. while in park it races at 2125 rpms. had car to dealer 4 times for same problem. dealer said it was a chip in computer. car will be towed again tonight. manufacturer has not been contacted yet. manufacturer was called the last time this happened. *ak
106/01/2002
 I bought a car from a x-police officer for a very good price. it ran well i had it checked out. brakes and all. they were fine. well i noticed the stopping distance was very long before all of this happened,. well to make it short i slighty hit a curb and that was it. the car is totaled.*ak
12/01/2001
 Vehicle is going 45-55mph it starts to decelerate. steering gets stiff. oil pressure light comes on, and when brakes are applied vehicle begins to accelerate without pressing on accelerator pedal. problem has duplicated itself many times, but dealer can't duplicate this problem to find a solution. once vehicle is restarted there is no problem.*ak
09/09/19991006/01/1996
 Steering and brakes lock, usually on a curve, always on wet road. problem has happened with other drivers in this vehicle. questions to dealer service department offer no enlightenment or satisfaction; they've never heard of anything like this.
1
 Anti-lock brakes engage for no apparent reason while driving, warning lights started coming on.
11/02/1996
 Poor abs brake performance during vehicle operation, the vehicle was hit on the passenger's side at 10 mph and complete brake failure was experienced. *ak
06/14/1996004/22/1996
 While driving vehicle put on abs brakes and vehicle did not stop. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
05/28/2002
 When brakes were applied they didn't hold. smoke was coming from hood. unable to steer vehicle, steering locked up. vehicle caught on fire, and was totalled.*ak
 When driving at high speeds brakes become spongy, will not lock which causes a gradual extended stopping distance, could result in an accident. *ak
 When applying the brakes there is a grinding noise and a vibration. dealer has been notified. *ak
105/06/1996
 Brake failed.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
09/15/2000204/01/1999
 The disc mounting assembly of the rear brakes is held in place by a single undersize screw on each side. this screw can shear, resulting in the pedal going to the floor with a complete loss of braking ability.*ak
05/01/199809/18/1996
 Intermittent problem: when depressing the brake pedal under normal braking, consumer noticed a very loud griding noise sound as if it's metal to metal coming from the front brakes. consumer has contacted the dealer on four occasions. dealer has attempted to correct problem, problem still occurs. please provide any further details. *ak
105/28/1997
 Consumer is concerned about the amount of brake dust that accumulates on the front wheels of the vehicle.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
01/13/1998
 Front/rear brake pads replaced.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
03/25/2000108/21/1999
 Vehicle shimmies when braking, turned rotors and replaced stabilizer links to rectify vibration problem. *mjs
01/13/1998
 Front brake rotors resurfaced/glazed.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
07/27/20081382101
 Tl*the contact owns a 1996 cadillac deville. the contact stated that the rubber part of the brake line split into two separate pieces while driving 35 mph. the brakes could not be used and the emergency brake and gears were applied to stop the vehicle from moving. general motors stated that someone would look into the failure at some point. the contact is a mechanic and stated that he has never seen this type of incident occur on a vehicle. he stated that the bracket that is attached to the strut is being stretched beyond its limit, which after time will eventually split. the failure mileage was 138,210 and current mileage was 138,449. updated 09/10/08 *bf the metal bracket that holds the rubber part of the brake line is cutting the rubber line right at the top of the bracket . updated 09/18/08. *jb
01/01/20051
 The steel lines to the front of the wheels rusted through causing brake fluid to leak. as a result the vehicle had no brakes. *nm *sc *jb
02/02/2002108/08/2001
 Brakes failed while going 10mph. when the brakes were applied trying to avoid an accident, brake line bursted from rusting. dealer was notified. *ak *slc
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
 Gas pedal repair