Consumer Complaints


Fail datemilesoccurencesPurchase date
LATCHES/LOCKS/LINKAGES
08/15/20081100001
 My mechanic said that the door latch can break because of the door hinges or something like that because the door does not close easily and you can see where there is damage to the latch on the door jam. *tr
07/02/2004404/06/2004
 1)component: latches/locks/linkages:hood:latch, )seats:front assembly adjustment level. 3)component: equipment:electrical:heater , 4)structure:body:door:hinge and attachments,(hand was smashed by door trying to get it to close right.these problem have been going on since april of 2004. *ak
07/05/200492000207/01/2001
 Both the driver side door and front passenger side doors,door bushings went out,causing the doors to droop and cause damage to the frame latch...attempt to fix the problem was unsuccessful. the bushings need replaced and welding work needs to be done on the frame. *ak
LATCHES/LOCKS/LINKAGES - DOORS - LATCH
04/06/20044450011/24/1999
 The metal behind the hook on the frame where the driver's door latch cracked, causing severe rattling and running risk of the door opening unintentionally. the door hinges and the hook had to be replaced and the frame welded at a cost of more than $500. the vehicle had less than 45,000 miles when the problem first occurred.
03/09/20041
 I have a 1999 chevy blazer that the drivers side door has weakened, and slipped down about an inch. this makes the door extremly hard to close since you need to lift up on it.*ak
LATCHES/LOCKS/LINKAGES - HATCHBACK/LIFTGATE - LOCK
 While driving tailgate hatch will fall open on its own without being released. dealer has been contacted. *ak
LATCHES/LOCKS/LINKAGES - HOOD - LATCH
08/30/1999105/01/1999
 2 months into owning this vehicle the upper console digital temperature read out went bad. upon replacing it twice it is still malfunctioning. they have even replaced the sensor on the front grill to no avail. at one oil change the vehicle was returned to me with a crooked hood. the lock assembly had slid over 1/2 inch. it caused the hood and the fender to meet and the two metals slammed together caused a scratch on both parts in the paint. the lock assembly was returned to it's original position. upon informing the dealer that the vehicle was slipping when in gear i was given a verbal driving lesson. i have been driving the chevrolet s-10 blazer since 1992 and this is the 3rd one i have aquired. after bringing in a third party the locking differential, all fluids, and seals were replaced, thus fixing the issue. at 4000 miles my engine burned out 3 of 6 fuel injectors with no explaination. i have been made aware of several other vehicles of the same year and model being brought in for the same issues. there are several other small issues, little buttons falling out, cover plates popping out of place, etc. but you do not have a box for these issues. the owner of this dealership is very aware of the issues i have come across as i have been a customer of this dealership for 3 years and have removed 3 vehicles from this dealership. thank you for your time. *ak