Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, AIR
461510023171Abs pump running when not needed. *nj10/31/2007
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR
0415200404/15/200410009220Vehicles may set anyone or a combination of front-wheel speed sensor anti-lock brake system codes as intermittent or hard failures. gm voicemail express. *tt09/17/2004
0096601/01/200400966A10007816Anti-lock braking system (abs) front wheel speed codes - jumper harness. *tt07/12/2004
00966B01/01/200410007293Abs front wheel speed codes - jumper harness. *tt06/09/2004
SERVICE BRAKES, HYDRAULIC - ANTILOCK
97080173502608/01/199754419Comment that the abs light is on with diagnostic trouble codes (dtc's) 46 and 86 set as current or history. *yc04/07/1998
9709015015A09/01/199754329Complaints that the abs indicator lamp is on. *yc03/30/1998

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - ANTILOCK
02/06/2004106/25/1997
 (1) for over a year now my anti-lock brakes on 1998 chevrolet corsica have failed to stop the vehicle in rainy wet conditions. i cannot drive the vehicle when rainy or wet. the brakes catch and release repeatedly eventually causing the car to slide (this even happens when driving 10 mph). after the first 15 stops it will eventually begin to stop without doing this. but in the case of the accident i had been driving for 30 minutes and the car failed to stop. (2) i was driving 20 mph with 3-4 car lengths between myself and car in front of me. the brakes did not stop in time. i hit the vehicle in front of me. (3) i have taken the vehicle to the chevrolet dealer on 3 occassions for this problem. they keep telling me that there is nothing wrong with the brakes. they say that they are supposed to do that. if that were the case, we would all be dead. the first 3 years that i had the vehicle it did not do this, so obviously this is not what it is supposed to do. i even had the dealership sign a paper stating that he could not do anything to correct this problem, so that i will have when i do have to handle this in a legal manner. after driving the vehicle and experiencing the brake failure, my mechanic said that the brakes are dangerous but that he cannot find anything wrong with them when he takes them apart. therefore he cannot fix it.*ak
05/22/1999105/01/1997
 Car is intermittently stalling/lacks for gas then accelerates uncontrollably, whining upon turning steering wheel, paint chipping on door frames
SERVICE BRAKES, HYDRAULIC - ANTILOCK
07/19/2001106/01/2000
 All 4 brakes went out, no peddle, garage found dirty sensors only, rest all good. master cly. full, pulled abs fuse, good, replaced, then had peddle but had garage check it as thats were i stopped with no brakes. similar prob. 2 years earlier on ford explorer. former us govt. car. *ak
01/15/2001106/04/1998
 When applying brakes, they pulsate, then there is a skipping sound. this happens at any speed.*ak
05/03/1999509/01/1997
 Fuse #9 on the vehicle keeps repetedly blowing out rendering the anti-lock brakes, the airbag, the power locks,the power lights, the rear defogger, the a/c blower,andthe instrument panel inoperable. this vehicle has been in 5 separate times for repairs for the aformentioned problem. due to the fact that all safety features on the vehicle become disabled, i do not believe that this vehicle is safe to drive. the dealership has been unable to find the problem, and has also sublet the vehicle to 3 other chevrolet dealerships that have also been unable to correct this problem. i am a pregnant mom with 3 children....safety is definitely an issue!!!!!!!
202/01/1998
 After replacing the original front rotors and pads the brakes began to shutter shortly after the brake job. the only solution offered by the mechanic at chevy garage was to turn rotors. this works for short period and starts up again. the mechanic stated the rotors are too small for the vehicle and the heat causes warping. the original brakes did not have the problem until completely worn out. i have put 2 sets of disc and new pads on and the problem continues. *ak
603/01/1996
 Braking problems: brakes were wearing prematurely and ruining rotors vehicle had abnormal vibrations while applying the brake...found that the calipers/bushings were too long shaved off 1/4 inch and it cured the problem ...they were dragging constantly as a result...have had no problems since this was done. lighting: have experienced problems while night driving...when putting on the high beams i have lost all lighting inside and out...once u switch back problem is cured this has happened several times and it is shocking when u can't see...does not happen every time... alternator: had to be replaced after car was in my possession for one year...also battery as a result...engine coolant: experienced my low coolant light coming on in the mornings approximately 3 minutes after starting vehicle...check coolant resevoir and it is empty...placed coolant in and again this morning same thing ...replaced coolant...drove to dealership and it was determined that coolant is leaking into the engine somewhere and oil level was 2 quarts above normal which meant that coolant was in the oil...awaiting diagnosis possible a intake gasket, head gasket, or cracked block ....summary: in a nut shell i have had alot of problems with a vehicle i paid good money for some of which could be major safety issues....i have 70,281 miles on this car and i keep up on all maintenance....very upset and awaiting a better prognosis for the future! *ak
02/01/1999
 Would like to have the entire recall history of this car, it is very important that i have it due to the fact that this is a driver's ed car with many students just starting how to drive. i originally found out that threr were a large number of recalls from midas muffler when i went in to have the car services. i had the brakes done completely, the front wheel bearings replaced (both sides). the back wheel bearnings need to be done very soon. please let me know if these are part of the recall.
 When abs brake pedal is depressed, would get strange noises & pulsation. pushing on brakes pedal, it would push foot back up. had taken to dealer & had pads & rotors changed. still noise persists. was intermittent, but now is constant. *ak
 Intermittently when the brakes are applied hard they lock up, and the pedal goes to the floor, resulting in extended stopping distance. the dealer has test driven the vehicle and could not duplicate the problem. *ak
08/01/1997
 Abs light comes on then the alternator is dead, replaced alternator three times, cannot find the problem other than the alternator *ak
08/02/1999
 Brakes stutter and pulsate with extending stopping time.consumer contacted dealer. *ak
208/01/1997
 Front end noisy due to premature wea rof the brakes. *ak
 Owner has abs brakes. while applying brakes they skip, causing vehicle to stop and go intermittently. vehicle also has unknown vibration in steering. *ak
 When applying the abs brakes the pedal travels to floor, causing extended stopping distance, nearly resulting in a collision. dealer cannot identify the problem. please give any further details. *ak
09/01/1997
 Vehicle on wet pavement and jerks when the brakes are applied. also, extended stopping distance occurs. dealer contacted and attempted to repair the vehicle, but problem still exists. problems can result in serious accidents. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
4
 Brake failure has been replaced 4 times starting 1 week after car was purchased 7000,17,000, 36000, and 54000 miles. *jb
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
03/01/20011
 Consumer noticed when driving rear of vehicle was swaying on road. contacted dealer, dealer noticed lower control arm was out of position, causing the problem. dealer replaced lower control arm. please provide any further details.*ak consumer states she did contact dealer, consumer went to an independent shop to have work performed.consumer also had front brakes replaced.*jb
202/01/1998
 After replacing the original front rotors and pads the brakes began to shutter shortly after the brake job. the only solution offered by the mechanic at chevy garage was to turn rotors. this works for short period and starts up again. the mechanic stated the rotors are too small for the vehicle and the heat causes warping. the original brakes did not have the problem until completely worn out. i have put 2 sets of disc and new pads on and the problem continues. *ak
603/01/1996
 Braking problems: brakes were wearing prematurely and ruining rotors vehicle had abnormal vibrations while applying the brake...found that the calipers/bushings were too long shaved off 1/4 inch and it cured the problem ...they were dragging constantly as a result...have had no problems since this was done. lighting: have experienced problems while night driving...when putting on the high beams i have lost all lighting inside and out...once u switch back problem is cured this has happened several times and it is shocking when u can't see...does not happen every time... alternator: had to be replaced after car was in my possession for one year...also battery as a result...engine coolant: experienced my low coolant light coming on in the mornings approximately 3 minutes after starting vehicle...check coolant resevoir and it is empty...placed coolant in and again this morning same thing ...replaced coolant...drove to dealership and it was determined that coolant is leaking into the engine somewhere and oil level was 2 quarts above normal which meant that coolant was in the oil...awaiting diagnosis possible a intake gasket, head gasket, or cracked block ....summary: in a nut shell i have had alot of problems with a vehicle i paid good money for some of which could be major safety issues....i have 70,281 miles on this car and i keep up on all maintenance....very upset and awaiting a better prognosis for the future! *ak
 When abs brake pedal is depressed, would get strange noises & pulsation. pushing on brakes pedal, it would push foot back up. had taken to dealer & had pads & rotors changed. still noise persists. was intermittent, but now is constant. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
208/01/1997
 Front end noisy due to premature wea rof the brakes. *ak
104/01/1997
 Both front brake pads failed.
 Front and rear brake pads are prematurely wearing, cause unknown. please give any further details. *ak
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
3
 Brake pedal locked up 3 times.