Chevrolet G20 1992
Model G20 made in 1992 by Chevrolet got 32 consumer complains as well as 4 recalls. Consumer complaints with reference, among others things, to electrical system and engine and engine cooling. There were some recalls concerningequipment and fuel system, gasoline.
Model 1992
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EQUIPMENT | ||||||||||||||||
07E088000 | HONEYWELL INTERNATIONAL, INC. | E (Equipment) | 121680 | 11/08/2007 | MFR | GENERAL MOTORS CORP. | 10/24/2007 | 10/30/2007 | ||||||||
Defect Summary | Certain honeywell fram racing brand hp4 and hp8 oil filters that were manufactured from may 25, 2006, through september 14, 2007, and sold for use as replacement equipment for vehicles list above. the affected filters are marked with a date code a61451 through a72571 sequentially. the date code and part number appear on the filter housing. fram racing hp4 and hp8 oil filters not bearing a date code in this range are not affected by this recall. the gasket of the oil filter becomes more pliable under high temperatures and pressures. | |||||||||||||||
Consequence Summary | This condition may cause inadequate sealing and loss of engine oil, possibly resulting in a fire. | |||||||||||||||
Corrective Summary | Honeywell will replace the affected oil filters free of charge. the recall began during november 2007. owners can contact fram customer service toll-free at 1-800-890-2075. | |||||||||||||||
Notes | Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
FUEL SYSTEM, GASOLINE | ||||||||||||||||
06E043000 | HONEYWELL INTERNATIONAL, INC. | E (Equipment) | 88303 | 10/18/2006 | MFR | GENERAL MOTORS CORP. | 05/19/2006 | 05/22/2006 | ||||||||
Defect Summary | Certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes, click on document search and then bus applications). the connector on the fuel filter was not manufactured to honeywell's specification. as a result, the o-ring may not seat correctly on the fuel line. | |||||||||||||||
Consequence Summary | This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. in the presence of an ignition source, a fire could occur. | |||||||||||||||
Corrective Summary | Honeywell will notify owners and replace the fuel filters free of charge. the recall began on october 18, 2006. owners may contact fram customer service at 1-800-890-2075 (option 1). | |||||||||||||||
Notes | This recall only pertains to aftermarket fram fuel filters and has no relation to any original equipment installed on the vehicles listed.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
SEATS - FRONT ASSEMBLY - HEAD RESTRAINT | ||||||||||||||||
94V177000 | SHERRY DESIGNS, INC. | from 09/01/1991 to 01/01/1994 | V (Vehicle) | 381 | 12/23/1994 | OVSC | GENERAL MOTORS CORP. | 09/14/1994 | 09/22/1994 | 571 | 202 | |||||
Defect Summary | The front driver and passenger seat back height does not conform to the requirements of fmvss no. 202, head restraints. | |||||||||||||||
Consequence Summary | Consequence of non-compliance: seat occupants are subject to increased risk of injury in the event of a sudd stop or accident. | |||||||||||||||
Corrective Summary | Sherry designs will provide an attachable headrest for the dealer or customer to add to the seats. | |||||||||||||||
Notes | System: interior systems; seat head restraints.vehicle description: conversion vans.note: if the vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time or the remedy does not correct the noncompliance, please contact sherry designs at 1-219-264-0602. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393. | |||||||||||||||
SERVICE BRAKES, HYDRAULIC - POWER ASSIST | ||||||||||||||||
92V127000 | GENERAL MOTORS CORP. | from 02/01/1992 to 02/01/1992 | V (Vehicle) | 246 | 09/25/1992 | MFR | GENERAL MOTORS CORP. | 09/03/1992 | 09/29/1992 | 571 | 105 | |||||
Defect Summary | The brake pedal assembly has a pushrod pin that is too small and it is installed in the wrong position, causing an increased brake pedal ratio and a decreased master cylinder stroke. | |||||||||||||||
Consequence Summary | The reduced master cylinder stroke results in failure tomeet the partial system failure requirements of fmvss 105, hydraulic brakesystems. a further reduction in braking ability at a time when partial systemfailure has occurred could result in a vehicle crash. | |||||||||||||||
Corrective Summary | Replace the brake assembly. | |||||||||||||||
Notes | System: brakes: brake pedal assembly; fmvss 105.vehicle description: vans equipped with vacuum power brakes.note: fmvss 105 requires that hydraulic brake systems have an emergency featurewhich stops the vehicle under specified conditions. all hydraulic brake systemsare designed with a split system. each split works independently from the other.the partial system failure test of the fmvss is performed with one of the splitsystems inoperative. |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
ELECTRICAL SYSTEM | |||
09/12/1997 | |||
Looked in rear mirror, noticed smoke , looked under van saw flames, no machanical problems, damage to van incluedes interior front half of van | |||
ELECTRICAL SYSTEM - FUSES AND CIRCUIT BREAKERS | |||
07/15/1992 | |||
The consumer has been experiencing problems with automatic transmission. vehicle bounces and sways side to side during any speed. in addition the seat belts aren't long enough to secure their driver. also, the fuses in the electrical system started failing.*ak | |||
ENGINE AND ENGINE COOLING - ENGINE | |||
02/04/1997 | |||
Replaced leaking seal/oil pan gasket/heater core. also replaced serpentine belt. *ak | |||
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE - BELTS AND ASSOCIATED PULLEYS | |||
02/04/1997 | |||
Replaced leaking seal/oil pan gasket/heater core. also replaced serpentine belt. *ak | |||
FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY - FILLER PIPE AND CAP | |||
01/02/2000 | 120 | 12/01/1993 | |
We have had an ongoing problem with the fuel filler neck on this vehicle. when you fill the vehicle up with fuel, once it is almost full, the gasoline tank belches (for lack of a better term) and fuel is expelled from the tank all over the person filling the vehicle (unless you stand appx. 2' away from the gas pump nozzle). we have talked to owner's of similar vehicles (this is a full size chevy conversion van) and all of them have the same problem. this is a very dangerous problem. fuel literally erupting from the filler nozzle can easily spray anyone standing nearby and can cause caustic burns to human flesh. please investigate this serious problem!! both chevrolet & gmc manufactured this vehicle from 1971 - 1996 and most, if not all, probably have the same problem. thank you! *ak | |||
01/22/1997 | 1 | 12/01/1993 | |
Gas expulsion after filling tank. | |||
POWER TRAIN - AUTOMATIC TRANSMISSION | |||
07/15/1992 | |||
The consumer has been experiencing problems with automatic transmission. vehicle bounces and sways side to side during any speed. in addition the seat belts aren't long enough to secure their driver. also, the fuses in the electrical system started failing.*ak | |||
Front oil pump in auto-transmission has failed interrupting response of acceleration when needed. please describe details. tt | |||
POWER TRAIN - AUTOMATIC TRANSMISSION - TORQUE CONVERTER | |||
1 | |||
Torque converter failed causing vibration. mjs | |||
10/16/1995 | 9 | ||
Automatic transmission failure, torque converter has been replaced five times, leaking transmission fluid. tt first the transmission was repaired due to vibration. then the torque converter was replaced. the transmission started leaking and the pump bushing and new torque convertor were replaced. again the transmission began vibrating and leaking. the problem still exists after tires were replaced as possible cause. cruise control failed. drive shaft was leaking *yh | |||
POWER TRAIN - DRIVELINE | |||
02/04/1997 | |||
Replaced leaking seal/oil pan gasket/heater core. also replaced serpentine belt. *ak | |||
POWER TRAIN - DRIVELINE - DRIVESHAFT | |||
10/16/1995 | 9 | ||
Automatic transmission failure, torque converter has been replaced five times, leaking transmission fluid. tt first the transmission was repaired due to vibration. then the torque converter was replaced. the transmission started leaking and the pump bushing and new torque convertor were replaced. again the transmission began vibrating and leaking. the problem still exists after tires were replaced as possible cause. cruise control failed. drive shaft was leaking *yh | |||
SEAT BELTS - FRONT - ANCHORAGE | |||
07/15/1992 | |||
The consumer has been experiencing problems with automatic transmission. vehicle bounces and sways side to side during any speed. in addition the seat belts aren't long enough to secure their driver. also, the fuses in the electrical system started failing.*ak | |||
SEAT BELTS - FRONT - WEBBING | |||
2 | 05/01/1992 | ||
Seat belts on both front seats are poorly placed and cause the seat belt to lay across the neck of the driver and front seat passenger. this has also caused excessive wear on the belts to the point of being frayed. in an accident, it appears that severe neck injury would occur due to their placement. this is a mark iii conversion van so i am not sure if the fault lies with the manufacturer or the conversion company. *ak | |||
SEATS - FRONT ASSEMBLY - RECLINER | |||
02/15/1996 | |||
Passenger and driver recline seat bolts broke, cause the seat fall backwards. tt | |||
SERVICE BRAKES, HYDRAULIC | |||
07/02/2011 | 171000 | ||
Tl- the contact owns a 1992 chevrolet g20. the contact stated that the brakes failed and caused the contact to crash into the rear of another vehicle. the contact was able to drive the vehicle to a mechanic and was told that the support for the brake line was rusted and the pressure caused the brake line to rupture. the vehicle was repaired. the vin was not available. the failure and current mileages were 171,000. kmj | |||
07/02/2011 | 171000 | ||
Tl- the contact owns a 1992 chevrolet g20. the contact stated the support for the brake lines had rusted through and the pressure caused the brake line to rupture. the failure caused the vehicle to hit another vehicle from behind. the contact thought the driver of the other vehicle may have been injured. the contact was able to drive the vehicle to a mechanic and was told was caused the failure. the has been repaired. the vin was not available. the failure mileage and current mileages were 171,000.rl | |||
SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||
11/01/1995 | 1 | ||
Abs, when applying brakes on wet surface front brakes lockup. tt *slc | |||
07/01/1995 | |||
Abs system not working properly when brakes are applied they do not catch right away. tt | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||
05/13/1997 | |||
While applying brakes there was no pressure on first attempt, then released pedal and tried again and pressure had returned. cause unknown. *ak | |||
12/30/1996 | 1 | 12/01/1991 | |
When brakes are applied steering wheel shimmies. | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM | |||
11/12/1998 | 1 | ||
No summary provided by consumer | |||
STRUCTURE - BODY - DOOR | |||
Drivers side door is falling off. please describe. tt | |||
SUSPENSION | |||
07/15/1992 | |||
The consumer has been experiencing problems with automatic transmission. vehicle bounces and sways side to side during any speed. in addition the seat belts aren't long enough to secure their driver. also, the fuses in the electrical system started failing.*ak | |||
SUSPENSION - FRONT | |||
06/25/1999 | |||
Front suspension rusted through, causing the driver's side front wheel to collapse, and could have caused loss of control. please provide further information. *ak | |||
VEHICLE SPEED CONTROL | |||
01/01/1993 | |||
While driving will go open throttle position or close position, causing to stall or accelerate. tt | |||
10/16/1995 | 9 | ||
Automatic transmission failure, torque converter has been replaced five times, leaking transmission fluid. tt first the transmission was repaired due to vibration. then the torque converter was replaced. the transmission started leaking and the pump bushing and new torque convertor were replaced. again the transmission began vibrating and leaking. the problem still exists after tires were replaced as possible cause. cruise control failed. drive shaft was leaking *yh | |||
VISIBILITY - DEFROSTER/DEFOGGER SYSTEM - WINDSHIELD - HEATER CORE | |||
02/04/1997 | |||
Replaced leaking seal/oil pan gasket/heater core. also replaced serpentine belt. *ak | |||
WHEELS | |||
11/12/1998 | 1 | ||
No summary provided by consumer |