Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| SUSPENSION | |||||
| 709 | 09/01/2005 | 10018133 | Tie rod specifications revised. gm tech link. *tt | 12/15/2005 | |
| 040308010 | 06/01/2004 | 10012182 | Changes to labor time guide relating to front suspension labor operations components. *eh | 02/16/2005 | |
| SUSPENSION - FRONT | |||||
| 010232001C | 08/01/2004 | 010232001D | 627673 | Information regarding clunk noise from front of vehicle during turning. *yh *tt | 02/13/2002 |
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| SUSPENSION | |||
| 11/15/2008 | 100000 | 1 | |
| I have a 2002 chevy impala. i have so many problems with is car since the moment i drove it off the lot. in my opinion, the whole car should be recalled. but, i am only going to file a complaint on my current issue. this is the second time this has happened to my car. about a year ago, i starting hearing a roaring sound coming from the front of my car when i drove down the road. it was really strange because it sounded like the engine, but the noise was not cause from pushing the gas, just the tires driving down the road. i took it to a local automotive center. they informed me that it was the hub bearing located near my tire. they told me it was so bad that my tire would have fallen off while driving, which could have a caused an accident. they fixed it, charging me $350. now, last month (nov 08), i started hearing that same noise. i already know that it's the same problem, but unsure if its coming from the same side or not. it is so bad that when i am going around a curve while driving, the whole car shakes and rattles. i cannot afford to get this fixed again. i have children and am very concerned for our safety. i just think that this is a very serious problem and could be dangerous. i do think that chevy should recall this. *tr | |||
| 10/11/2006 | 30000 | 1 | 11/10/2001 |
| A state inspection @30,000 miles revealed a bad upper control arm, left and right inner tie rod ends and both motor mounts. my mechanic feels as though these part failures are very premature and were caused by a very loose steering rack . he told me that i should contact someone to see if there is a repair bulletin for this problem. i don't think a car should need that kind of front end work a 30,000 miles . i'm also concerned that my wife ,who drives the car on a daily basis, is at risk while driving herself and our 2 kids to and from their daily routines. please let me know if anything can be done to correct this problem as soon as possible!! thank you!! *nm | |||
| 06/01/2004 | 28000 | 3 | 09/01/2001 |
| The consumer states the head light lenses produced condensation. as a result, the lights were dim. *jb water was getting into the headlights and there was a front and rear alignment problem. as a result of these two problems, there was poor night vision and the tires needed to be replaced. *sc *jb | |||
| SUSPENSION - FRONT | |||
| 05/09/2003 | 34860 | 7 | 02/13/2003 |
| I wanted him to check my driver side back door because it wouldn't open very easily at times, and the window to that same door would not open at times. also, my trunk wouldn't open when one would use the trunk release button at times. i also had him check my dimming headlights, my steering which had a jerk in it when i went around curves, clicking sound in engine and an over all check since my warranty is about to run out in 1,000 miles. turn out-after leaving the dealer my air conditioner was humming like a helicopter, my brakes were horrible and grinding and the car feels like it has no get up and go power. i took my car to brake check after leaving because when the dealer did the overall check of my car they said i needed a front brake job. and they wanted to charge me over 200.00 dollars. the dealer told me it was not covered under my warranty. well brake check took off all four tires and found that my problem was due to left and right caliper problems on the inboard side and left rear hard wear problems and wear on the outboard side. the caliper is engaging but not disengaging and caused my pads to wear out and my rotors are ate up. the pads are not worn evenly which is definitely a sign of caliper problems. also, the dealer upon the overall inspection of my car said that my intake gaskets were ruined and leaking coolant. they said they replaced them, however i am afraid that there is further damage to my vehicle that they are not telling me, just like my brakes. due to the fact that steve at lone star told me that it was caused due to lack of oils changes and gil said it was a problem with the gaskets being improperly seated from the factory or just a defect in the gasket. well is this why my car has no get up anymore? my car also made a grinding sound when hitting bumps under the right front fender area that nothing was done about and my headlight problem they said was due to a faulty battery cable. *nlm | |||
| 06/30/2002 | 92 | 1 | 06/29/2002 |
| We purchased this impala ls with 90 miles on it (as it was driven up from a dealer in new jersey). since the first day we had the vehicle there has been a clearance problem - when going up or down a normal garage or driveway incline at the slowest speed (even below 5 mph), the car bottoms out. we have advised both paul conte and the gm chevy division of this immediately and repeatedly. their response was, the vehicle had a design flaw. we do not feel chevrolet's design flaw should be the consumer's issue. this could be a safety issue. *jb | |||
| SUSPENSION - FRONT - HUB | |||
| 07/15/2004 | 6000 | 2 | |
| Rear wheel hubs and bearings are making noise. inside the hub there is a bearing which holds the tire/wheel on, and bolts to the rear axle were causing the problem. this wheel assembly was already replaced at 60,000 miles. the abs light and service traction system light comes on and off. consumer has had the bearings replaced 2 months ago at consumer's expense. currently, the bearings are in need of replacement after on 6,000 or 7, 000 miles.*ak | |||
| SUSPENSION - FRONT - WHEEL BEARING | |||
| 11/15/2008 | 100000 | 1 | |
| I have a 2002 chevy impala. i have so many problems with is car since the moment i drove it off the lot. in my opinion, the whole car should be recalled. but, i am only going to file a complaint on my current issue. this is the second time this has happened to my car. about a year ago, i starting hearing a roaring sound coming from the front of my car when i drove down the road. it was really strange because it sounded like the engine, but the noise was not cause from pushing the gas, just the tires driving down the road. i took it to a local automotive center. they informed me that it was the hub bearing located near my tire. they told me it was so bad that my tire would have fallen off while driving, which could have a caused an accident. they fixed it, charging me $350. now, last month (nov 08), i started hearing that same noise. i already know that it's the same problem, but unsure if its coming from the same side or not. it is so bad that when i am going around a curve while driving, the whole car shakes and rattles. i cannot afford to get this fixed again. i have children and am very concerned for our safety. i just think that this is a very serious problem and could be dangerous. i do think that chevy should recall this. *tr | |||
| 07/15/2004 | 6000 | 2 | |
| Rear wheel hubs and bearings are making noise. inside the hub there is a bearing which holds the tire/wheel on, and bolts to the rear axle were causing the problem. this wheel assembly was already replaced at 60,000 miles. the abs light and service traction system light comes on and off. consumer has had the bearings replaced 2 months ago at consumer's expense. currently, the bearings are in need of replacement after on 6,000 or 7, 000 miles.*ak | |||
| SUSPENSION - REAR | |||
| 18000 | 1 | ||
| When the brakes were applied, the rear of the vehicle vibrated extremely hard. *jb | |||
| 18000 | 1 | ||
| When the brakes were applied, the rear of the vehicle vibrated extremely hard. *jb | |||
| 18000 | 1 | ||
| When the brakes were applied, the rear of the vehicle vibrated extremely hard. *jb | |||
| 18000 | 1 | ||
| When the brakes were applied, the rear of the vehicle vibrated extremely hard. *jb | |||