Chevrolet K20 1988

Model K20 made in 1988 by Chevrolet got 1 consumer complain there are 3 investigations as well as 6 recalls. Consumer complaints with reference to other. . The car had some investigations: fuel system, gasoline, service brakes, hydraulic and vehicle speed control. There were some recalls concerninglatches/locks/linkages, power train and service brakes, hydraulic.

Model 1988

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
LATCHES/LOCKS/LINKAGES - DOORS - LATCH
87V127000GENERAL MOTORS CORP.from 01/01/1987 to 02/01/1987V (Vehicle)152108/31/1987MFRGENERAL MOTORS CORP.08/10/198708/17/1987571206
Defect SummaryTrucks may have cracked or broken door striker nuts, which do not conform to fmvss 206.
Consequence SummaryIn a collision, cracked or broken striker nut couldallow door to open unexpectedly and possibly cause injury to occupants.
Corrective SummaryReplace existing door striker nuts.
NotesSystem: door locks/fmvss 206.vehicle description: light and medium duty pickup trucks.
POWER TRAIN - AUTOMATIC TRANSMISSION
93V016000GENERAL MOTORS CORP.from 12/01/1986 to 08/01/1992V (Vehicle)170288003/13/1993ODIGENERAL MOTORS CORP.02/01/199302/04/1993
Defect SummaryUnanticipated heat in the transmission can force the transmission fluid out of the vent tube.
Consequence SummaryThe vented transmission fluid can catch fire if exposedto a source of ignition.
Corrective SummaryInstall a longer transmission vent hose routed to the left side of the engine compartment of the vehicle.
NotesSystem: power train.vehicle description: light trucks with 5.0 l, 5.7 l, and 7.4 l engines and 4l60,4l60-e, and 3l80 automatic transmissions.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
93V119000GENERAL MOTORS CORP.from 04/01/1986 to 12/01/1991V (Vehicle)34136411/08/1993ODIGENERAL MOTORS CORP.08/02/199307/26/1993
Defect SummarySevere corrosion due to road salt at the joint of the stamped steel center section and the cast outer section can cause the sections to separate.
Consequence SummarySeparation of the rotor sections can cause loss ofbraking ability in the affected wheel. this could result in increased stoppingdistance and/or loss of vehicle control and an accident.
Corrective SummaryReplace the front brake rotors with new rotors with a corrosion protection coating. however, if replacement of brake linings are necessary, it will be done at owner's expense since brake linings are normal maintenance items.
NotesSystem: brakes; hydraulic; disk rotors.vehicle description: light trucks and vans sold or registered in the followingstates: ct, il, in, ma, me, mi, nh, nj, ny, oh, pa, ri, vt, and wi.notes: the vehicles involved can be identified by the following: the 5thcharacter of the vehicle identification number must be a k or l, and theseventh character must be 3,4,5,6, or 9.if your vehicle is presented to an authorized dealer on an agreed uponservice date, and the remedy is not provided within a reasonable amount of timeand free of charge or the remedy does not correct the safety-related defect ornoncompliance, please contact your nearest gmc truck zone office. the telephonenumbers of the zone offices are listed in your warranty and owner's assistanceinformation manuals. also contact the national highway traffic safetyadministration's auto safety hotline at 1-800-424-9393.
STEERING - LINKAGES - TIE ROD ASSEMBLY
87V126000GENERAL MOTORS CORP.from 01/01/1987 to 02/01/1987V (Vehicle)275008/31/1987MFRGENERAL MOTORS CORP.08/10/198708/17/1987
Defect SummaryOne or both of outer tie rod nuts may be loose and not crimped.
Consequence SummaryLoss of one or both nuts could lead to tie roddisengaging from steering knuckle resulting in possible loss of steeringcontrol and possibly a crash.
Corrective SummaryReplace tie rod and knuckle and set toe-in.
NotesSystem: steering/tie rod nuts.vehicle description: light and medium duty pickup trucks.
SUSPENSION - FRONT - SHOCK ABSORBER
87V128000GENERAL MOTORS CORP.from 04/01/1986 to 01/01/1987V (Vehicle)31208/31/1987MFRGENERAL MOTORS CORP.08/10/198708/17/1987
Defect SummaryIncorrect front shock absorber upper and lower nuts could loosen.
Consequence SummaryShock absorber could detach and come in contact withfront brake hose; this contact could result in a leak in the hose and loss offront brakes.
Corrective SummaryReplace free spinning nuts with torque nuts.
NotesSystem: shock absorber nutsvehicle description: light and medium duty pickup trucks.
VEHICLE SPEED CONTROL - LINKAGES
87V125000GENERAL MOTORS CORP.from 12/01/1986 to 03/01/1987V (Vehicle)889308/31/1987MFRGENERAL MOTORS CORP.08/10/198708/17/1987
Defect SummaryCruise control cable lock mechanism may self disengage causing erratic operation or throttle not returning to idle.
Consequence SummaryEngine speed would not decrease; loss of acceleratorcontrol could result in a crash without prior warning.
Corrective SummaryInstall a clamp around the lock tab of cruise control.
NotesSystem: cruise controlvehicle description: light and medium duty pickup trucks with cruise control.

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY
EA92041GENERAL MOTORS CORP.12/08/199203/09/1995FUEL SYSTEM INTEGRITY
 There is no summary currently available
SERVICE BRAKES, HYDRAULIC
PE88019GENERAL MOTORS CORP.01/19/198803/31/1988REAR BRK LIGHTS STAY ON
 There is no summary currently available
VEHICLE SPEED CONTROL - LINKAGES
EA88016GENERAL MOTORS CORP.01/19/198806/30/1988HIGH TEMP & FUEL EXP
 There is no summary currently available

Consumer Complaints


Fail datemilesoccurencesPurchase date
OTHER
06/15/199708/01/1990
 I feel the paint used on 1988 cheyenne pickup trucks was inferior. i have seen several trucks of the same make, model, year with the same problem.