Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SEAT BELTS
90V054000GENERAL MOTORS CORP.from 03/01/1988 to 03/01/1990V (Vehicle)67300007/23/1990OVSCGENERAL MOTORS CORP.03/14/199007/19/1990571210
Defect SummaryFront shoulder belt guide loop attachment fastener may pull through door mounted anchor plate.
Consequence SummarySeat belt may not sustain loads required by fmvss 210, and in a vehicle accident, the seat belt may not properly restrain a passenger, resulting in increased risk of greater injury to an occupant.
Corrective SummaryReplace front shoulder belt guide loop attachment nuts and install new guide cover.
NotesSystem: seat belt anchorage; fmvss 210.vehicle description: passenger cars.
91V005000GENERAL MOTORS CORP.from 02/01/1989 to 08/01/1990V (Vehicle)41279202/22/1991ODIGENERAL MOTORS CORP.10/02/199102/19/1991
Defect SummaryFront shoulder safety belt webbing may separate at front belt upper guide loops on either side of the front seat.
Consequence SummaryWebbing separation could occur without prior warning andincrease the risk of injury to belted front outboard occupants in a high energycrash.
Corrective SummaryInstall a controlled rotation bracket on driver and passenger side front seat belt guide loops.
NotesSystem: front shoulder safety belt.vehicle description: passenger cars.

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
SEAT BELTS
EA90014GENERAL MOTORS CORP.03/12/199002/20/1991SAFETY BELT CUT BY D-RING91V005000
 There is no summary currently available
PE90013GENERAL MOTORS CORP.10/25/198901/03/1990SAFETY BELT CUT BY D-RINGS
 There is no summary currently available

Consumer Complaints


Fail datemilesoccurencesPurchase date
SEAT BELTS
07/22/20031425561
 My wife was driving her car at appoximately 40 mph when there was a loud thud. she then tried to steer the car to the shoulder, but had no control of the steering wheel. she got out and looked under the car to see what happened. the engine cradle had broken and was resting on the road. had she been going 60 mph on the freeway, she would have been in a major accident. i contacted a chevrolet dealership. they said there were two recalls on her vehicle: one for the engine cradle bolts, and one for the seatbelts. the vehicle is a 1990 chevy lumina sedan. vin # 2g1wl54t4l1190230. *ak
01/29/1997101/01/1992
 Seat belt comes apart with movement. (qc-aw)
 Recalls 97v058000/91v005000;the manufacturer and the chevrolet enterprise dealership have different information in their system. the manufacturer has the recall on the rear cradle bolts, and the dealership has information on the seat belts. doesn't know what to do because the dealership is only going to perform the recall work on what is in his system. *ak
 Receive recall on #91v005000 had been waiting two to four year to get recall repair dealer say will call you when receive part. tt
SEAT BELTS - FRONT
01/01/1997108/15/1998
 Front seat belts too loose, don't tighten. also, coil spring failure. *ak
SEAT BELTS - FRONT - ANCHORAGE
04/26/20013
 Driver's side seat belt failed to retract, and the seat belt assembly has been replaced three times. driver's side seat belt is inoperable. *ak shoulder portion of the seat belt for both the driver and passenger sides failed three times. *yh
10/02/199902/01/1995
 Door came open making seat belt come open because, it was attached to door causing driver to be expelled from car causing driver to receive very severe injuries to face and head with driver pinned under the car. wanting to know what can be done about this? seat belts can not be attached to the door of a car. he could of been killed. please contact me on this matter.
02/03/1999206/01/1998
 I have had problems with the car since i own the car. dealer replaced gas tank once, but it was with a rusty tank, problems with safety belts going out of shape, as well as the brakes not working or crumbling. need replacement often. see other issues. *ak( dot number: tire size: 195r14 )
01/29/1997101/01/1992
 Seat belt comes apart with movement. (qc-aw)
05/06/199807/06/1990
 Left front seat belt failed to operate properly.
11/14/1996103/17/1990
 Driver's side seat belt broke.
03/22/1996
 The rear passenger shoulder and lap belt will not come out of the housing unit therefore cannot be used. please describe. *ak
02/09/1996
 Driver shoulder belt did not lock upon hitting a tree, allowing the driver to hit the windshield. *ak
11/05/19941
 Seat belts fail to restrain driver/passenger during accident, resulting in injury.
SEAT BELTS - FRONT - BUCKLE ASSEMBLY
01/12/20031
 Seat belts did not lock upon impact. ts. *ak
12/04/1998103/01/1991
 The seatbelt latch just came apart as i was driving i am concerned that the other seatbelts and the replacement could fail in a crash and cause serious injuries to me and my family
01/01/1994203/20/1990
 A small plastic part in sea tbelt mechanism broke, makin git almost impossible to release belt. problem corrected by consumer.
07/17/1995
 The seatbelt in the front does not latch. please describe. tt
 Drivers seat belt buckle give false sense of latching w/top piece completely breaking off. please describe details. tt
04/01/1995
 The front passengers and drivers plastic cover on release buckle broke, there is a medal piece that hurts hand when locking the seat belt . *ak
SEAT BELTS - FRONT - RETRACTOR
10/15/20011
 Consumer stated the driver restraint belt system retractor fails to operate properly, the shoulder belt will not feed back into retractor, dealership informed consumer that component is no longer under warranty, and is not covered under any recall. *ak *yh
04/01/2001
 Driver's seat belt retractor fails to operate properly by not reducing amount of slack when belt is buckled. retractor mechanism has been replaced by dealership, but failure of this mechanism to reduce slack in belt continues. please provide any additional information/attachments.*ak
08/28/1998106/01/1993
 Safety belts either lockup in the retracted position ,making them unable to be used, or the belts dont lock up at all under high g stops. they just don't work as they are designed to and i feel that gm should replace mine under warantee as this is a crucial safety component, in fact 1 is schedualed to be replaced but shouldn't anyone who has this problem get theirs replaced as well?
09/15/1998310/01/1990
 Driver's side seat belt will not retract; and when the belt is being worn it falls off the driver, and would not restrain the occupant if in a vehicle crash. retractor has been replaced by dealer at least three times. dealer now says to deal directly with chevrolet; dealer can not fix it. when reported to chevrolet, they said to deal with the dealer.
04/01/1997
 Driver's side seat belt will not retract; and when the belt is being worn it falls off the driver, and would not restrain the occupant if in a vehicle crash. *ak
08/11/1996
 The driver's seat belt is stuck in the retractor. *ak
11/01/19941
 Front seatbelt retractors failed due to spring falling out. *dsh
11/01/1995
 Failure on the driver's side seat beat retractor, seat belt will not retract. *ak
SEAT BELTS - FRONT - WEBBING
01/24/1999
 Consumer's shoulder belt keeps coming loose. it has been fixed twice by the dealer. this time the dealer will fix the driver side and not the passenger's side. consumer wants the chevrolet to pay for the passenger side. chevrolet file # 000043894. *ak