Chevrolet P30 1984
Model P30 made in 1984 by Chevrolet got 7 investigations as well as 4 recalls. The car had some investigations: suspension and vehicle speed control. There were some recalls concerningengine and engine cooling and equipment.
Model 1984
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ENGINE AND ENGINE COOLING - COOLING SYSTEM - FAN | ||||||||||||||||
85V128000 | GENERAL MOTORS CORP. | from 10/01/1981 to 07/01/1985 | V (Vehicle) | 383 | MFR | GENERAL MOTORS CORP. | 10/15/1985 | 10/18/1985 | ||||||||
Defect Summary | The fan blade, when subjected to high stress levels, can fatigue and break apart at the hub while the engine is running. consequence of defect: if breakage occurs while hood is open, a person working under the hood or near the truck could be struck by a blade part and be injured. | |||||||||||||||
Consequence Summary | ||||||||||||||||
Corrective Summary | Replace engine fan. | |||||||||||||||
Notes | System:engine fan blade.vehicle description: meduim trucks with a 6.2l diesel engine, 4 speed manualtransmission and a 4.56 rear axle ratio. | |||||||||||||||
EQUIPMENT | ||||||||||||||||
07E088000 | HONEYWELL INTERNATIONAL, INC. | E (Equipment) | 121680 | 11/08/2007 | MFR | GENERAL MOTORS CORP. | 10/24/2007 | 10/30/2007 | ||||||||
Defect Summary | Certain honeywell fram racing brand hp4 and hp8 oil filters that were manufactured from may 25, 2006, through september 14, 2007, and sold for use as replacement equipment for vehicles list above. the affected filters are marked with a date code a61451 through a72571 sequentially. the date code and part number appear on the filter housing. fram racing hp4 and hp8 oil filters not bearing a date code in this range are not affected by this recall. the gasket of the oil filter becomes more pliable under high temperatures and pressures. | |||||||||||||||
Consequence Summary | This condition may cause inadequate sealing and loss of engine oil, possibly resulting in a fire. | |||||||||||||||
Corrective Summary | Honeywell will replace the affected oil filters free of charge. the recall began during november 2007. owners can contact fram customer service toll-free at 1-800-890-2075. | |||||||||||||||
Notes | Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY - FILLER PIPE AND CAP | ||||||||||||||||
84V133000 | GENERAL MOTORS CORP. | from 11/01/1983 to 05/01/1984 | V (Vehicle) | 11305 | 11/15/1984 | MFR | GENERAL MOTORS CORP. | 10/16/1984 | 11/09/1984 | 571 | 301 | |||||
Defect Summary | Due to a manufacturing problem with the fuel tank filler pipe, the fuel cap may improperly seal the end of the filler pipe. this fails to conform to the requirements of federal motor vehicle safety standard 301, fuel system integrity. in the event of a collision, an improperly sealed filler pipe could allow fuel spillage. | |||||||||||||||
Consequence Summary | ||||||||||||||||
Corrective Summary | The dealer will inspect and replace fuel caps on all affected vehicles without charge. | |||||||||||||||
Notes | Vehicle description: light trucks.system: fuel system; fuel tank filler pipe mounting.consequences of defect: leaking fuel could result in a vehicle fire andpersonal injury to passengers in the event of an accident. | |||||||||||||||
SEATS | ||||||||||||||||
86V117000 | GENERAL MOTORS CORP. | from 04/01/1984 to 10/01/1985 | V (Vehicle) | 46 | 08/29/1986 | MFR | GENERAL MOTORS CORP. | 08/25/1986 | 08/28/1986 | 571 | 207 | |||||
Defect Summary | Three bolts which attach the sill that supports the base of the seat were omitted; therefore vehicles do not comply with fmvss 210 and fmvss 207. consequence of defect: in the event of a crash, the floor plate could buckle along the inboard side causing the seat pedestal to be imbalanced, and increasing the likelihood of injury to the seat occupant. | |||||||||||||||
Consequence Summary | ||||||||||||||||
Corrective Summary | Install missing bolts. | |||||||||||||||
Notes | System: seat attaching bolts/fmvss 207 and 210. vehicle description: light duty trucks equipped with union city king steelbodies and driver/passenger bucket seats with a tilt pedestal. |
Investigations
NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
---|---|---|---|---|---|---|
SUSPENSION | ||||||
EA88007 | GENERAL MOTORS CORP. | 11/06/1987 | 10/24/1988 | LOWER CONTROL ARM | 88V110000 | |
There is no summary currently available | ||||||
EA88007 | GENERAL MOTORS CORP. | 11/06/1987 | 10/24/1988 | LOWER CONTROL ARM | 88V110001 | |
There is no summary currently available | ||||||
PE87056 | GENERAL MOTORS CORP. | 09/08/1987 | 11/06/1987 | LOWER CONTROL ARM FAILURE | ||
There is no summary currently available | ||||||
EA88007 | GENERAL MOTORS CORP. | 11/06/1987 | 10/24/1988 | LOWER CONTROL ARM | 88V110002 | |
There is no summary currently available | ||||||
VEHICLE SPEED CONTROL - LINKAGES | ||||||
PE88016 | GENERAL MOTORS CORP. | 01/14/1988 | 03/31/1988 | EXHAUST MANIFOLD LEAKS | ||
There is no summary currently available | ||||||
PE87006 | GENERAL MOTORS CORP. | 11/14/1986 | 04/22/1987 | FUEL SPURTING | ||
There is no summary currently available | ||||||
EA88043 | GENERAL MOTORS CORP. | 09/20/1988 | 09/26/1989 | FUEL EXPULSION | ||
There is no summary currently available |