Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SEATS
93V187000GENERAL MOTORS CORP.from 08/01/1984 to 01/01/1991V (Vehicle)60420701/20/1994ODIGENERAL MOTORS CORP.11/16/199311/29/1993
Defect SummaryThe recliner mechanism and the seat frame may have foam and/or vinyl between them, creating a soft joint. this soft joint results in lower than specified bolt torque which leads to joint looseness, causing bolt fatigue and eventual bolt failure.
Consequence SummaryIf bolt failure occurs to the driver's seat, it wouldallow the seat back to suddenly recline, and could result in loss of vehiclecontrol and a vehicle crash without prior warning.
Corrective SummaryDealers will remove the foam and/or vinyl from between the recliner mechanism and the seat frame soft joint and replace the recliner bolts.
NotesSystem: interior systems; seat tracks, anchors, and seats.vehicle description: vans and utility vehicles equipped with bucket seats withknob type recliner mechanisms.note: if your vehicle is presented to an authorized dealer on an agreed uponservice date and the remedy is not provided within a reasonable time and freeof charge or the remedy does not correct the defect or noncompliance, pleasecontact the gmc service center at 1-313-456-4547 or the chevrolet service centerat 1-800-222-1020. also, please contact the national highway traffic safetyadministration's auto safety hotline at 1-800-424-9393.

Consumer Complaints


Fail datemilesoccurencesPurchase date
SEATS
 Back seat bolt broke.
05/17/19981
 Recall repairs performed, repairs failed (seat back collapsed) resulting in accident/injury.(attorney for client) (93v187)
08/25/19981
 Had received recall notice over 2yrs ago (#93v187000). the recall remedy failed. the bolts on the driver's side seats failed to hold the seat.
10/12/19901
 Welding on seat bracket was insufficient to hold the seat, resulting in metal fatigue and failure. *ak
07/24/19954
 Vehicles seat/seat frames failed. (attorney for client) *dh
10/04/1995
 Had seat recall done in february, sat in drivers side seat and bolt broke. tt
12/01/19942
 Driver seat collapsed prior to/twice after recall repairs (93v-187). tt & *ak
SEATS - FRONT ASSEMBLY - RECLINER
1
 The driver seat snapped (backrest). *et
 Seatback reclining mechanism broke while owner was driving vehicle. seatback is currently reclined all the way back, making it impossible to drive vehicle. dealer says it was age and fatigue. *ak
07/20/1995
 Intreior systems;seat track anchors and seats: had recall work done in july 1995for seatback. on feb. 20,1996 took vehicle back because the left seatback was loose. june 2, 97, the seatback broke again. took vehicle in and they gave him two bolts to repair the seat . each time there was a charge and consumer doesn't feel that a charge was in order because it wasn't repaired correctly the first time. *ak
01/01/19943
 The front seat recliner bolt broke, seat back fell, and driver momentarily lost control of vehicle.
04/12/1994
 While driving the driver's side seat bolt broke, causing the seat to fall backward, resulting in an accident. *ak
04/03/1996204/26/1990
 While driving the two front seats bolts broke, causing the seats to recline prior to/after recall repairs (93v-187); warped front brake rotors. *ak
01/01/1995
 Involved in recall 93v187000, dealer made repairs but the seatback collapsed again. tt
11/29/1995
 Seat recliner bolts are loose, causing the seat to fall back, service bulletin will not fix the problem. tt
03/18/1995
 After recall work was done, seatback collapsed allowing seatback to fall rearward, when bolts sheared off, 93v187000, 91-c-19. tt