Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| STRUCTURE | |||||
| 990859002 | 08/01/1999 | 607575 | Some 4-door models only may exhibit a creaking type sound coming from the right rear wheel opening or the dog leg area. *tt | 09/29/1999 | |
| STRUCTURE - BODY | |||||
| 990859002A | 11/01/2000 | 990859002 | 617740 | Some customers may comment that there is a creaking type sound coming from the right rear wheel opening or the dog leg area when driving slowly or in parking lot type maneuvers on 4-door models only. *tt | 03/26/2001 |
| STRUCTURE - BODY - BUMPERS | |||||
| 000862004 | 11/01/2000 | 617731 | Some customers may comment that the ends of the rear bumper at the rear wheelhouse openings are loose. *tt | 03/24/2001 | |
| STRUCTURE - BODY - ROOF AND PILLARS | |||||
| 990867004 | 09/01/1999 | 609071 | This bulletin contains information on conditions due to convertible top waterleaks. *tt | 12/08/1999 | |
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| STRUCTURE | |||
| 06/15/2003 | 0 | ||
| My complaint isn't the failure of the items on the truck. we purchased this truck from sands on broadway. the truck was lifted when we purchased it, we asked the finance person who was selling us the warranty if the warranty covered everything since the truck was lifted. he said yes and went as far as assuring us that it would even cover the over sized tires. we made it clear several times that we did not want the truck if the extended warranty didn't cover a lifted truck. we were assured that it would cover the truck even though it was lifted. so we purchased the truck on 1/25/03. it is now 6/24/03 and we have already had to take the truck in. there is over 1k of work that needs to be done on the trucks suspension and they are not willing to cover it because the truck is lifted. an inspector came out and viewed the truck and told us that they would cover nothing that had to do with the suspension or the door because the truck is lifted. my boyfriend and i have both called the dealership and have gottent the run around. according to the dealrship the person that sold us the warranty no longer works in their office and they are basically telling us to bad. i have a phone call into the gm of the dealership. they misrepresented to us what this warranty was suppose to cover, those tires that he said would be covered are not, it clearly says in the warranty that they will only cover factory tires, another lie. | |||
| 01/30/2001 | 1 | ||
| Consumer was traveling when suddenly vehicle started sliding and spun around 2 times, vehicle came to a stop after hitting the street curb which caused the tire to blow and totaled the rim, consumer feels the vehicle was made too light and states that anytime during wet weather, the vehicle is extremely dangerous. *slc | |||
| 1 | 05/01/1999 | ||
| The vehicle is light weight and moves about the road without consumers direction. nlm | |||
| STRUCTURE - BODY - ROOF AND PILLARS | |||
| 1 | 05/01/1999 | ||
| Removing and replacing the top on the vehicle is difficult and driving the car with the top off makes it hard to stay in it's lane. nlm | |||
| STRUCTURE - FRAME AND MEMBERS | |||
| 03/18/2011 | 120000 | ||
| Front frame crossmember rusted through in multiple areas and has made vehicle unsafe to drive. the vehicle pulls violently to the left when the brakes are applied at high speeds or turning sharply. | |||
| 10/02/2010 | 116500 | ||
| Driving on highway when the front suspension began to shudder violently. applying brakes caused vehicle to swerve to the left. inspection showed that front control arm mount had seperated completly from the crossmember due to corrosion. called chevrolet customer service and was told in carefully parsed words that according to my vin there was no coverage or recall despite what i have found on lin: special coverage adjustment - front suspension crossmember corrosion #06186 - (10/17/2007) 1999-2004 chevrolet tracker | |||
| 10/05/2010 | 73312 | ||
| My mother said to me that her car was pulling to the center line when she put her brakes on. she and i naturally thought she had a stuck caliper or something of that nature. she drove it to my house the next morning, and said it was pulling badly to the center line. i jacked up the car to find that the [suspension crossmember] subframe where it holds the front mount for the lower control arm to the car, was corrodded and had acctually broke, causing the front wheel to just move around making the car pull hard to the left. this car only has 70k miles on it and is well maintained in fact, it just passed vehicle inspection the previous month. this part in my opinion should not have failed this way. her car is now out of service due to this problem. please help her in any way you can. she did not have an accident but i'm not sure why this falure could have easily been tragic. thank you | |||
| 05/25/2010 | 113000 | 1 | |
| 1999 chevy tracker front crossmember rusted through from the inside causing the car to pull very hard when braking. there was a recall on certain vin #'s for this vehicle but mine was not part of the recall. i did develop the problem though. the front crossmember is rusted out from the inside and is just about to break off. this could have been very dangerous causing a loss of control of the vehicle. i reported to gm and they said they can do nothing to help. the vehicle does not have rust on the bottom of the vehicle yet this part completely rusted through. *tr | |||
| 01/23/2010 | 150957 | 1 | |
| I began to notice that the steering had started to feel a little loose requiring a lot of correction when driving, but i didn't think it was anything serious. i took the car in to the repair shop to have the brakes repaired and as soon as they raised it up on the lift they noticed that the drivers side cradle/crossmember to suspension corroded and rusted through and the left front lower control arm detached. the mechanic stated that he had never seen anything like this happen and was very dangerous - could allow complete loss of steering or if on the interstate with more speed could cause the vehicle to flip over causing serious injury or death. the cradle/crossmember was replaced and all new bolts were used. please do something about this before too many people are injured or killed - i was lucky. *tr | |||
| 11/04/2009 | 91000 | 1 | |
| 1999 chevy tracker sub frame rotted out. on driver side. vehicle shook violently and pulled very hard to the right. almost drove off the road and crashed. did not find any recalls. chevy said the sell many of these parts but no recalls for problems. *tr | |||
| 09/04/2008 | 118057 | 1 | |
| Recently had service bulletin #06186, nhtsa # 10023633 performed on vehicle, regarding rusted and corroded front crossmember. when i got the vehicle home and was inspecting the work, i noticed that the engine oil pan is also very rusted and corroded to where oil is seeping though the metal. *tr | |||
| 05/23/2008 | 120000 | 1 | |
| '99 chevy tracker. rust from inside the metal to inner& outer surfaces. the doors, rockers panels & into the floor plate, window frames & door edges. bought this vehicle used,3weks ago, but looking almost new inside & out. there was to the eye only some slightly bubbled paint in 8 spots decide to get right on it started to emeory cloth it & found that a little push ,particularly the rocker panels, would go completely through to the inner surface. both rocker panels front to rear were the same. so i used my grinder to cut them open to see how far i would have to go to get past the rust. once i got the panels open i could see that the corrosion went clear into the floor panels. i then decided 2 hit the spots on the doors found basically the same thing. then looking on the internet found out g>m> was repairing and reimbursing owners for improperly treated treating frame & cross members which are rusting through. also replacing corroded hardware everywhere it is found on these vehicles from '99 to 2004. this body rust seems to be the same thing. dangerous? if the seriously weakend rockers & floor plate were struck at even a low speed i do not doubt that any person in this vehicle would suffer crush injuries. this is reminiscent of the 70's & 80's when gm was using heavily corroded metal to build vehicles. & created unsafe & expensive conditions for the consumers & lost a good portion of the car market to foreign manufacturers. i have several pictures i can send you. please advise. sincerely dan church *tr | |||
| 01/27/2007 | 130000 | 1 | 09/14/2006 |
| Rusted through front crossmember resulted in loss of steering and braking control. *jb | |||
| STRUCTURE - FRAME AND MEMBERS - UNDERBODY SHIELDS | |||
| 04/20/2007 | 70000 | 1 | 01/01/1999 |
| Tl*the contact owns a 1999 chevrolet tracker. the contact's vehicle had the same failure as others who own the same vehicle. the failure was derived from corrosion of the cross members. he stated that the suspension corroded on the right side of the vehicle, causing it to switch lanes and veer off the road at 40 mph. he has not been able to get in contact with the manufacturer. the current and failure mileages were 70,000. *ak | |||