Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - ANTILOCK
96V099000CHRYSLER CORPORATIONfrom 07/01/1990 to 06/01/1993V (Vehicle)32100009/03/1996ODICHRYSLER GROUP LLC06/13/199606/18/1996
Defect SummaryThe abs hydraulic control unit can experience excessive brake actuator piston seal wear causing pump-motor deterioration.
Consequence SummaryIf this condition occurs, the abs function could be lost and reduced power assist would be experienced during vehicle braking increasing the potential for a vehicle accident.
Corrective SummaryDealers will test the vehicle's anti-lock brake system and repair the vehicles if necessary. also the warranty on all abs components will be extended to 10 years or 100,000 miles (except for the brake actuator piston assembly and the pump-motor assembly which will have a lifetime coverage). owners will also be reimbursed for previous abs component repair costs.
NotesSystem: brakes; hydraulic; anti-skid system. vehicle description: passenger vehicles and mini-vans equipped with anti-lock brake systems (abs). note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact chrysler at 1-800-853-1403. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
SERVICE BRAKES, HYDRAULIC
EA95016CHRYSLER GROUP LLC05/26/199506/24/1996ABS BRAKING MALFUNCTION96V099000
 There is no summary currently available
SERVICE BRAKES, HYDRAULIC - FLUID
DP04007CHRYSLER GROUP LLC10/13/200410/27/2004FUEL RAIL, BRAKE FLUID, CHASSIS
 On september 5, 2004, mr. robert galenty of iselin, nj, petitioned the agency to conduct defect investigations of certain model year (my) 1993-1997 vehicles produced by daimlerchrysler corporation.his petition identified three issues of concern: 1) fuel leaking from the fuel injector rails; 2) brake fluid contamination resulting in brake failure; and 3) susceptibility of the vehicle frame to damage while the vehicle is being towed.mr. galanty alleged that his 1996 dodge intrepid had each of these three problems.concerning fuel rail leakage, daimlerchrysler commenced a recall (98v-184) of approximately 722,600 vehicles to address engine fuel rail leaks that could lead to a fire, including those vehicles cited in the petition and the petitioner's 1996 dodge intrepid.on october 7, 1998, nhtsa opened a recall query investigation (rq98-018) to evaluate the adequacy of the recall remedy.that investigation was closed on july 8, 2002 without requiring further action by daimlerchrysler.very recently, on june 9, 2004, nhtsa denied a petition (rp04-001) to reopen rq98-018 after finding that there was no new information that would indicate any basis for reopening it.this is still the current position of nhtsa on this issue.concerning brake fluid contamination and frame alignment, a review of nhtsa's database shows no other complaints on either one of these issues on the vehicles cited in the petition.

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - ANTILOCK - ABS WARNING LIGHT
07/28/20031
 I have a 1993 chrysler new yorker, which has a recall on the abs system, i had the system replaced by hahn motor company, yakima, wa. last week, july 21, 2003, the abs and brake lights started coming on again - i called and made an appointment with hahn motor company to have the vehicle fixed. the lights have been on the entire week and this morning when i took the vehicle in - they have had my vehicle all day and are now telling me the system has now decided to work correctly and they cannot find any problem. *ak
SERVICE BRAKES, AIR - DISC - PADS
103/01/1996
 Axle shaft, wheel bearings, and pads failed.
SERVICE BRAKES, HYDRAULIC
11/02/201065000
 Tl-the contact owns a 1993 chrysler new yorker. while driving 30 mph approaching a stop she engaged the brake and pump the brakes and the brakes went to the floor. she had to pull the brake pedal up with her hand after the vehicle stopped. the vehicle was taken to a local mechanic and he advised her of recall 96v099000, service brakes, hydraulic:anti lock and advised her to take the vehicle to an authorized dealer. the vehicle was purchased used in march 2009. she stated the failure had been on going for the last month. she stated she took the vehicle to a dealer and they refused to do the recall. she called the manufacture and was advised that the recall had a lifetime warranty. the approximate failure mileage was 65,000 and the current mileage was 66,763. vwb
09/24/200799817
 Tl*the contact owns a 1993 chrysler new yorker. the contact stated that the brakes on her vehicle suddenly felt as if more pressure needed to be applied when the pedal was depressed. the brakes pulsate when braking on slick surfaces. the abs activates on dry pavement and slows the vehicle down; therefore, more pressure has to be applied to the brake pedal. a mechanic stated that the abs pump was not activating properly. the dealer could not duplicate the failure. nhtsa campaign id number 96v099000 (service brakes, hydraulic:antilock) was referenced. the current mileage was 104,500 and failure mileage was 99,817.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
11/28/2005209/24/2005
 Dt: the contact states there is nhtsa recall campaign 96v099000 concerning anti lock brakes. the vehicle was taken to dealer for diagnostic test, and according to the test, the problem was related to the recall. the dealership maintained it was not a problem, and will not perform the recall work. the manufacturer was called, and based on the dealership's recommendation , they also refused to repair the vehicle. *ak
10
 Abs brakes are inoperative. when applying the brakes the pedal is hard and it vibrates. vehicle was taken to the dealer for inspection, but dealer could not determined the cause of the problem. *ak mechanic contacted consumer that brake pump was under recall. consumer went to dealership but refused to repair vehicle. *la
07/28/20031
 I have a 1993 chrysler new yorker, which has a recall on the abs system, i had the system replaced by hahn motor company, yakima, wa. last week, july 21, 2003, the abs and brake lights started coming on again - i called and made an appointment with hahn motor company to have the vehicle fixed. the lights have been on the entire week and this morning when i took the vehicle in - they have had my vehicle all day and are now telling me the system has now decided to work correctly and they cannot find any problem. *ak
10/01/1998
 Consumer contacted the dealer in reference to recall 96v09900, manufacturer's recall 68. , dealer states parts are not available. consumer currently experiencing problems with faulty brakes. please provide any further details. *ak
 Purchased car used, the computer dashboard somtimes doesn't work, was having problem with the abs anti-lock brakes, received recall letter . please describe .*ak
08/23/19967
 Abs brake failure prior to/after recall repairs, still experiences problems with abs light coming on and pedal becoming very hard. (96v-099). *ak
08/27/1995
 Anti-lock brakes light on buzzing underneath hood power brakes appears to switched to manual. *ak
02/20/19950
 Antilock brake pump failed causing vibration/extended stopping distances. *aw
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
07/12/2001
 While driving vehicle will lose brakes. problem is intermittent. contacted dealer, and the dealer was not iwlling to do anything.*ak
06/01/20011
 Fluid is leaking from hydraulic unit, a pint a day is added to unit to keep it from drying out. consumer went to a dealer in town, and one dealer stated that fluid was being over filled. second dealer confirmed a leak, and ordered the part for repair. *ak *yh
 When applying the abs brakes the pedal nearly traveled to the floor, causing extended stopping distance. also extreme pressure was used to get the pedal to move. cause unknown. please give any further details.
103/01/1996
 Brakes failed causing vehicle to pull to the right.
 This car has had many steering and braking problems.
2
 When brakes are applied, they pulsate. tt consumer states when driving and put on the brakes, the vehicle begins to shake, it feels like the tires are on a wash board and continues to shake until the vehicle comes to a complete stop, consumer was advised that rotors are warpind.*jb
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
2
 When brakes are applied, they pulsate. tt consumer states when driving and put on the brakes, the vehicle begins to shake, it feels like the tires are on a wash board and continues to shake until the vehicle comes to a complete stop, consumer was advised that rotors are warpind.*jb
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
1
 Brake calipers failed.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
06/01/19966
 The brake pads failed.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
1
 Brake rotors failed.
SERVICE BRAKES, HYDRAULIC - POWER ASSIST
01/15/1993
 Power brake failure; hard pedal; no power assist; slow stopping;valve installed; rotors replaced; rotors remachined. tt