Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - ANTILOCK
96V099000CHRYSLER CORPORATIONfrom 07/01/1990 to 06/01/1993V (Vehicle)32100009/03/1996ODICHRYSLER GROUP LLC06/13/199606/18/1996
Defect SummaryThe abs hydraulic control unit can experience excessive brake actuator piston seal wear causing pump-motor deterioration.
Consequence SummaryIf this condition occurs, the abs function could be lost and reduced power assist would be experienced during vehicle braking increasing the potential for a vehicle accident.
Corrective SummaryDealers will test the vehicle's anti-lock brake system and repair the vehicles if necessary. also the warranty on all abs components will be extended to 10 years or 100,000 miles (except for the brake actuator piston assembly and the pump-motor assembly which will have a lifetime coverage). owners will also be reimbursed for previous abs component repair costs.
NotesSystem: brakes; hydraulic; anti-skid system. vehicle description: passenger vehicles and mini-vans equipped with anti-lock brake systems (abs). note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact chrysler at 1-800-853-1403. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
91V191000CHRYSLER CORPORATIONfrom 03/01/1990 to 07/01/1991V (Vehicle)8000001/10/1992ODICHRYSLER GROUP LLC11/01/199111/06/1991
Defect SummaryThe anti-lock brake system high pressure hose may leak or detach at its crimped end fitting resulting in the discharge of hydraulic fluid.
Consequence SummaryFluid discharge eventually causes the loss of both theanti-lock brake system and hydraulic assist for the brake system, resulting inincreased likelihood of brake lockup and increased stopping distances, whichcould result in a vehicle accident.
Corrective SummaryReplace the abs high pressure hose with a hose of different design and construction.
NotesSystem: brakes.vehicle description: passenger cars and vans with anti-lock brake systems (abs).
92V030000CHRYSLER CORPORATIONfrom 06/01/1991 to 07/01/1991V (Vehicle)1049202/28/1992ODICHRYSLER GROUP LLC03/10/199203/23/1992
Defect SummaryThe anti-lock brake system high pressure pump may be porous which will result in brake fluid leakage.
Consequence SummaryFluid leakage eventually causes the loss of both theanti-lock brake system and hydraulic assist for the brake system, resulting inincreased likelihood of brake lockup and increased stopping distances, whichcould result in a vehicle accident.
Corrective SummaryReplace the abs high pressure pump and high pressure hose if the last six digits of the bar code label on the pump are between 052300 and 059262.
NotesSystem: brakes; abs system.vehicle description: passenger mini-vans with anti-lock braking systems (abs).note: see also nhtsa campaign no. 91v191000.

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
SERVICE BRAKES, HYDRAULIC
PE91093CHRYSLER GROUP LLC06/28/199110/23/1991ABS CONTROL FAILURE
 There is no summary currently available
EA94028CHRYSLER GROUP LLC07/29/199406/24/1996ABS BRAKING SYSTEM FAILS96V099000
 There is no summary currently available
PE94024CHRYSLER GROUP LLC03/07/199407/29/1994ABS BRAKING SYSTEM FAILS
 There is no summary currently available
PE91094CHRYSLER GROUP LLC07/05/199111/26/1991BRAKING PERFORMANCE LOSS91V191000
 There is no summary currently available
PE91094CHRYSLER GROUP LLC07/05/199111/26/1991BRAKING PERFORMANCE LOSS92V030000
 There is no summary currently available

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, HYDRAULIC
06/10/199772000
 Tl- the contact owns a 1991 chrysler town and country. while parked the contact noticed the abs warning light illuminated on the instrument panel. also, the contact stated the abs function was constantly on and it became difficult to drive. the dealer was contacted and stated the vehicle had previously been repaired under nhtsa campaign id number: 96v099000 (service brakes, hydraulic:antilock) and would have to be diagnosed for the failure. the contact stated prior to the recall repairs she had not experienced a failure with the vehicle. the vehicle was not repaired. the approximate failure mileage was 72,000. ds
09/16/20031250004
 The brake pedal became hard when the driver made a sudden stop which resulted in extended stopping distances. the dealership repaired the vehicle but the problem still exist. *nlm
SERVICE BRAKES, HYDRAULIC - ANTILOCK
03/20/2007104000304/10/2004
 Tl*the contact owns a 1991 chrysler town and country. while driving 30 mph, the abs failed to operate and the vehicle took 20-30 additional feet to stop. the abs light illuminated intermittently. while at the dealer on february 15, 2008, they stated that there was failure with the wiring and the vehicle needed a cylinder module and electrical work. the repair would cost approximately $200. the contact had the vehicle repaired, but the failure recurred. the dealer stated that nothing further could be done. the failure mileage was 104,000 and current mileage was 118,000.
10/25/2005130000301/15/2003
 Dt:the contact received nhtsa recall, campaign 96v099000 concerning abs brakes. while pulling out of a parking space the abs activated. the vehicle was stopped without incident. the vehicle was repaired under this recall. however, the brakes failed twice within a week. the vehicle was repaired again, and the contact was afraid to drive the vehicle. *ak
04/12/20041
 When the brakes are applied there is a delay before the vehicle will stop. *ak
06/13/200314481911/08/1990
 Loss of brakes --car is equipped with antilock brakes --third separate incident. *nlm
08/06/2001307/01/1999
 No summary listed for abov evehicle. *ak
08/06/2001307/01/1999
 Vehicle experienced 3 episodes of complete abs failure while driving, the manufacturer refused to rectify the problem under recall 96v-099. *ak
12/10/19961
 Recall related, 96v099, vehicle involved in side collision, impact position, speed 35mph, abs brake failure, rear passenger side wheel off hwy, applied brakes and pedal went to the floor. *ak *jb
07/20/19951
 The abs braking system failed. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
08/10/20041200004
 Nhtsa recall 92v030000 concerning brake pump failure. consumer contacted the manufacturer, and was told that vehicle was recalled, and to proceed to the dealer for repairs. consumer had the repairs done, and experienced brake failure four times since the pump was replaced. on each occasion the pump was replaced with a defective pump. *ak