Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, HYDRAULIC - ANTILOCK - CONTROL UNIT/MODULE
05229412/01/199437867Antilock brake system warning light illuminated due to wheel speed sensor connector. *tw01/13/1995

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, HYDRAULIC
02/08/2005116000
 Tl*the contact owns a 1994 chrysler town and country. the sliding door is currently being held onto the vehicle by one out of three hinges. the door has to be pushed very hard in order for it to close. in addition, the rear wiper does not work and the motor needs to be replaced. the contact has decided not to repair the vehicle. when he places the vehicle into drive, it takes a while to shift. the vehicle makes a thumping sound when it does shift into gear. the air conditioner has not worked since the vehicle was purchased. the all wheel drive makes a clunking noise coming from the rear of the vehicle. on a hot day, the gears skip as if they are not gripping properly in the rear of the vehicle. the current mileage was 135,000 and failure mileage was 116,000.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
05/12/20031252881402/06/1995
 I am experiencing rear wheel lock-up upon initial application of the brakes on a gravel surface. this occurs with very light brake application. after stopping a couple of times on a dry hard surface the brakes appear to work ok.
12/01/2001107/01/2001
 No summary listed for abov evehicle. *ak
01/15/2001108/01/2000
 Consumer applied brakes at 50 mph and rear wheels started to skid, when rearending vehicle in front he felt pulsation of the brakes. pedal felt normal. no injuries, vehicle was totalled. *ak consumer states that the airbags failed to deploy. *jb
09/27/1996
 The abs braking system malfunctioned, causing the abs light to come on. pedal wentgoing to the floor , causing extended stopping distance which may result in a crash. please provide further information and vin#. *ak
02/01/1998
 Intermittently the braking system malfunctions, causing the brake pedal to feel soft and extended stopping distance. been to dealer numerous times. dealer cannot determine problem. *ak
04/23/19983
 There would be no pulsing in abs brakes when they are applied. would have regular brakes only. abs brakes failed to operate properly while driving approximately 15mph turning a corner. will be taking vehicle to dealer. *ak
01/01/19971011/01/1996
 Abs brakes failed 10 times, once resulting in a collision.
08/01/1996210/22/1993
 Abd brakes failed, pedal went all the way to the floor and vehicle eventually stopped with excessive pressure to brake pedal. *ak
12/01/1995
 Abs, brake failure, intermittently brakes make grinding noise and pedal goes to the floor & abs light continues to come on (yellow) sensor replaced 6 times. *ak
10/01/1995
 Abs system failure, partial loss of braking, excessive brake pedal effort. tt
 Abs brakes; soft pedal, occurs intermittently but excessive times. please describe details. tt
 Consumer was driving and the abs anti-lock brake light came on and afterwards there was no brake. tt
04/03/1995
 Abs system, brake pedal fade to the floor, resulting in long stopping distance. tt
 Abs brakes did not always stop upon applying them-had problem getting someone to take care of them. tt
06/28/19941
 Abs brakes, during brake application pedal appears to float, also decreased stopping power on rough roads. *ak
 1) abs brakes have failed (3) times resulting hitting fence. 2) auto-trans w/auto overdirve down shift @ highway speed throwing passengers. tt
02/03/19951
 Abs brakes failed. *ak
SERVICE BRAKES, HYDRAULIC - ANTILOCK - CONTROL UNIT/MODULE
3
 Abs speed sensor failed causing extended stopping distances. mjs
01/01/1994
 The anti lock brakes failed.
09/01/19951510/01/1993
 Antilock brake system failed after several repair attempts.
01/12/199510
 Right anti-lock brake sensor failed. *skd
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
03/02/1998101/01/1994
 Brakes failed causing them to feel loose and to fade.
08/30/19940
 Intermittent brake failures. (attorney for client) *skd
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
 Front disc brakes ar e rusted and worn out. therefore, they must be replaced because they cannot be cut down. *ak