Classic Classic

Model Classic made by Classic got 1 consumer complain as well as 1 recall. Consumer complaints with reference to structure. . There was one recall concerning suspension .

Model 2000


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
00V358005CLASSIC MANUFACTURING, INC.from 06/01/2000 to 08/31/2000V (Vehicle)8ODICLASSIC MANUFACTURING, INC.01/09/200106/06/2001
Defect SummaryVehicle description: trailers equipped with dexter axles that were manufactured with a bearing option known as nev-r-lube. the optional hub utilizes a sealed cartridge bearing which is held in place with a retaining ring that prevents the hub from shifting on the bearing. some of these axle assemblies were produced without the retaining ring.
Consequence SummaryThe absence of the retaining ring can allow the hub to shift inward and may result in brake interference or tire contact to the vehicle structure. braking problems can result in a loss of control of the vehicle. tire contact to the vehicle structure can result in overheating and potentially lead to a fire or cause the tire to blowout.
Corrective SummaryDexter axle will inspect and repair the affected axles free of charge.
NotesDexter axle will notify owners.owner notification began october 26, 2000.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact dexter axle at 800-400-2164 or classic at 616-651-9319..also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Consumer Complaints

Fail datemilesoccurencesPurchase date
 This is a trailer designed for and carries two cars. both frame rails have developed extensive frame cracks just forward and aft of the axles that may lead to collapse. the trailer walls are not supported over the axles. the wall load is concentrated on the frame support rails immediately fore and aft of the axles and overload the frame there. the frame has split is 7 locations. digital photos have been provided to the manufacturer and are available. the manufacturer says the trailer is out of warranty and has no further interest in the failure of their frame.*ak