Consumer Complaints


Fail datemilesoccurencesPurchase date
SUSPENSION - FRONT
10/03/2010100000
 Death wobble. i have been having constant problems with the front end of my dodge ram 2500, most recently after replacing the steering knuckles, tie rids in the stabilizer bar, bushings in the stabilizer arms, all the ball joints, and track arm, and constantly balancing tires it has developed what all the blogs are calling the death wobble i'm getting sick and tired of replacing everything in the front end of this truck with no decent fixes available on the part of dodge. this shake and wobble is so violent that if there were ice or water on the road, i am sure someone could easily be killed at 70 mph.
104/01/1995
 Uncontrollable vibration in the front end when hitting a rough spot in the road.
SUSPENSION - FRONT - SHOCK ABSORBER
01/01/19011
 Nar 3-11-03 the consumer stated that when his truck was used for snow plowing, the front of the truck twisted, which caused stress to various areas of the truck. in addition the consumer felt that the shock tower defect recall(99v214000) may be part of the problem. it has been suggested by the consumer that the truck be recalled and repaired. *cb *jb
08/27/19981
 The left spring bracket broke off the truck frame while driving prior to recall notice 99v-214 causing the steering to become difficult. nlm
SUSPENSION - FRONT - SPRINGS - COIL SPRINGS
07/17/20000
 After taking care of a recall for coil spring tower enforcement vehicle was violently shaking without a warning. *ak
05/01/1995
 Consumer contacted dealer in reference to manufacturer's recall 835/ nhtsa recall number not listed. dealer stated that tool/ welder needed to correct the problem was not available. chrysler issued a direct to dealer care letter. repairs have not yet been made. *ak *ml
SUSPENSION - FRONT - STABILIZER BAR
07/12/2004157000110/05/2001
 Track bar failure and extreme shimmey leading to uncontrolable vehicle. occurs any time vehicle is driven over 50 miles per hour.*ak
08/29/1996
 Vehicle's front stabilezer bar bracket weld tore loose from frame and car lost control.the mfr only welded it 60% to the body.*ak
SUSPENSION - REAR - AXLE - NON-POWERED AXLE ASSEMBLY
01/15/2003960005
 The rear axle seals had to be replaced for the fifth time. the manufacturer stated they placed a different seal on the vehicle and the problem would not come back. the mechanic noticed oil in the wheel well. *jb