Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM - HOSES, LINES/PIPING, AND FITTINGS
97V068000CHRYSLER CORPORATIONfrom 06/25/1995 to 06/25/1996V (Vehicle)5800005/19/1997MFRCHRYSLER GROUP LLC04/28/199705/01/1997
Defect SummaryVehicle description: pickup trucks equipped with diesel engines. the engine driven vacuum pump can allow engine oil into the vacuum hoses due to the absence of an internal check valve. the oil can cause the hose to deteriorate and partially collapse, reducing the vacuum supply to the brake booster.
Consequence SummaryReduced power brake assist can result increasing the risk of a vehicle crash.
Corrective SummaryDealers will add a vacuum pump check valve to the vacuum pump. in addition, the vacuum hose connected to the vacuum pump will be replaced with a hose that is engine oil resistant.
NotesOwner notification began may 19, 1997. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact chrysler at 1-800-853-1403.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, AIR - DRUM - SHOES/LININGS
05049703/28/199754386Front brake lining wear prematurely when compared to the wear experienced on the rear brake linings. *yc04/07/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
05069906/25/1999606161Information regarding accelerated brake lining wear, front versus rear. *tt08/11/1999
05039703/17/199751965Brakes - chassis dynamics diagnosis. *tw07/17/1997
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
05029503/01/199539988Front disc brake noise. *tw11/01/1995
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - SHOES/LININGS
05059703/28/199705-02-96A6088765Concerns with accelerated brake lining wear, front versus rear. *nlm01/07/2000
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM
05119912/31/1999609987Information regarding a revised power brake booster check valve. *tt04/12/2000

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - ANTILOCK
 When applying the brakes, vehicle pulls to the left. please describe.*ak
SERVICE BRAKES, AIR - DRUM
102/01/1996
 Brake pads/drums failed.
SERVICE BRAKES, HYDRAULIC
09/01/1994
 Having intermittent loss of brake pressure while vehicle is at low rpm's. *ak
SERVICE BRAKES, HYDRAULIC - ANTILOCK
03/05/19983004/01/1995
 No summary listed for above vehicle. *ak
09/01/2001
 While vehicle stops on a grade brake pedal will lose resistance, and fall to the floorboard. this results in vehicle rolling into an intersection. also, when attempting to apply the brakes during normal operation, pedal will go to the floor, and brakes fail to slow vehicle. according dealership was unwilling to examine vehicle for this problem and other issues. please provide any additional information / attachments.*ak
03/20/200109/01/1995
 No summary listed for above vehicle. *ak
05/10/1999501/01/1995
 Brakes have not worked properly since purchased.dealer has check several times. *ak
08/06/2000
 When brakes were applied in a panic stop pedal became hard and released, resulting in extended stopping which caused a collision. dealer has repaired vehicle several times prior to this incident. *ak
07/28/20001
 While traveling at 24 to 30 mph consumer tried to turn and steering wheel was locked. consumer tried to brake there were no brakes. vehicle hit a pole, and airbags didn't deploy. when consumer contacted dealer for a recall letter received. dealer had no parts available. consumer felt this accident was caused because recall problem was not corrected. *ak while waiting for recall parts to arrive at dealer for steering wheel and column the steering wheel locked up causing accident. *yh
 Consumer contacted dealer in reference to manufacturer's recall 875/ abs brake failure. dealer corrected problem. however, consumer noted that abs light was still illuminating. please provide any further details.*ak
 Recall 00v135000/ abs brakes. after dealer performed recall repairs vehicle started to stall, and the abs light illuminated while in motion. consumer stated that the remedy has failed to correct the defect. manufacturer will be notified.*ak
12/15/1994
 97v068000/brakes: vehicle been experiencing ongoing problem with brake failure. vehicle been to dealer shop on four or more occasions, and condition still is unresolved. transmission trouble has also occurred several times. *ak *ml
 When brake pedal was applied it went to the floor, and vehicle would not stop. dealer has been contacted. *ak
02/09/20000
 Consumer stated that air bag light and abs brake light will come on unexpectedly at all times. *ak
11/01/199912/21/1994
 While depressing the brakes, noticed a noise. vehicle continued to travel. consumer pushed pedal all the way to floorboard. dealer has been notified. *ak
 Consume r has only 39,000 miles on vehicle, and has replaced the brakes.dealer said that warranty has been voided because consumer had paid to have it fixed somewhere else. manufacture was called also to see if the vin# was matched to a recall. was informed no recall. *ak
09/15/1999811/01/1995
 Rear brakes grab and lock up when backing up or starting out sometimes. transmission doesn't go into overdrive high rpm at high speeds.
5
 No summary
 When the brakes are applied the pedal goes to the floor, resulting in extended stopping distance. also, dealer has replaced the master cylinder and the problem still exists. the manufacturer has been notified. *ak
10011/01/1995
 Violent lateral pull upon brake application. occures about once to five times every 150 applications. *ak
01/27/1999108/01/1995
 This vehicle,and others of same model and year, have chronically weak braking. have discussed it several times with dealer; no remedies offered. nearly unable to stop at moderate speeds much of the time. seems to get somewhat better after repeated usage. i consider it to be unsafe with normal driving practices. *ak
11/08/199705/01/1995
 While driving the vehicle consumer tried to make a sudden stop by depressing the brake pedal, the vehicle continued to travel, lost control, resulting in a crash/injuries. *ak
08/19/1998107/15/1995
 Brakes started scrapping and making noise, the inside pads on front were grounded into the rotor, metal against metal, dealer contacted and cannot duplicate the problem. consumer made repairs, contacted manufacturer and they cannot duplicate the problem. *ak
04/25/199802/01/1995
 While driving left front brakes malfunctioned. the brake rotors and pads were destroyed. the dealer and manufacturer have been notified. *ak
11/14/19946
 Whenever brake pedal is pressed downward to slow or stop vehicle, it would not stop. vehicle would coast, instead. took to dealer & service manager said that the brakes had faded. the brakes were a constant problem. had the brake pads replaced, but the problem was not solved. *ak
11/01/1997105/12/1998
 Abs brake failure. also front brake calipers/pads and rotors malfunctioned. in addition, distributor cap points plugs wires needed replacement.
110/07/1995
 Anti lock brakes fail in the rear, causing premature wear of the front pads.
 When the brakes are applied they grab. the rear brakes release, causing the front brakes to do all of the work, resulting in extended stopping distance. the dealer has replaced the rear wheel cylinders and the power booster. the dealer has been made aware of the existing problem. *ak
01/02/1998107/01/1995
 Anti lock brakes failed resulting in vehicle collision.
09/29/1997
 Driving at approx 55 mph went to push brakes,pedal went to floor, no brakes, no rotors. had to pull emergency brake in order to stop. there was no warning. mechanic repaired vehicle, replaced all new brakes, new rotors also replaced. *ak
105/01/1995
 Brake problems.
09/09/1997712/15/1994
 Abs brakes failed, causing vehicle to pull to the right. also, replaced front brake pads. *ak
12/20/1995304/01/1995
 Abs brakes locked up three times. *ak
09/15/199707/01/1995
 When brakes are applied vehicle pulls to the right or to the left. dealer has not been able to fix the problem. *ak
07/01/19961
 Anti lock brakes failed.
106/20/1995
 Antilock brakes lock up.
05/15/199650
 Anti-lock brake light comes on spontaneouly when depressed, brake pedal locks up/grabs, causing abs failure, extended stopping distance. dealer has not duplicated problem, no corrective action taken. *k
1012/01/1995
 While driving front brakes failed/ replaced 10 times. also front tires replaced. *ak
 Owner states that he was involved in a head-on crash traveling at 35-40mph and there was no deployment of driver's side airbag. also, rear abs brakes locked up, resulting in a crash. *ak
01/30/199710/01/1995
 Abs brake failure, loss of brake effectiveness, when braking the pedal goes to the floor, pump backs up , complete loss of pressure, extending stopping distance. *ak
06/01/1996612/03/1995
 Abs brakes have been replaced six times due to poor design. *ak
04/21/1996
 Anti-lock brakes: driving approximatelty 25mph ,person ahead stopped, hit brakes and they grabbed for a second , hit bump in road vehicle slid for 6 feet before stopping. vehicle has been in for repairs 3 times and each time driver is told something different. had an accident 4on -18-97 due to brake failure. *ak
 During panic stop, at approx. 40mph, brake action seemed inadequate to effectively stop, vehicle continued to roll forward, rearended vehicle in front, no prior warning. *ak
03/25/19976
 While driving vehicle applied brakes (abs), vehicle would be thrown either r/l each time at various speedd; had taken vehicle to dealer; they are unable to fix problem. *ak
08/03/1995
 Abs brakes failed, causing vehicle pulls to the right without an apparent warning, cause of problem unknown. *ak
02/21/1997311/29/1994
 When applying the brakes they will grab and when pressed harder the brakes released and the pedal went to the floor, once resulting in a crash. *ak
01/18/1997
 Upon applying force to the brake pedal the front right brakes lock up, causing vibration in the front end; in addition, the vehicle pulls to the right, resulting in an accident. *ak
2
 When applying the brakes on dry or wet pavement at any rate of speed, the anti-lock braking system fails, causing extended stopping distance. owner has repair bills. *ak
12/10/1996207/03/1996
 Antilock brakes failed twice.
09/22/1996
 Brakes: when hitting the brakes the front brakes seem like they activate. vehicle only slows minimully and it is an intermittent problem, one never know when its going to happen. repair shop can't find a problem. *ak
10/19/19961
 Antilock brakes fail intermittently.
10/25/1996209/01/1994
 Antilock brakes failed twice, once causing accident.
309/01/1995
 When the brakes are applied to slow down the vehicle pulls to the left. *ak consumer states that sometimes vehicle will pull slightly and sometimes it will pull so bad that the vehicle will turn a corner on its own, this has been an ongoing problem since two months after purchase. transmission has leaked three times. radio broke. power windows failed. fuel pump failed. knocking noise in engine. weather stripping falling off. *slc
07/07/1995
 While driving on normal road conditions when applying the brakes normally the vehicle pulls to the left. the system has abs. after being repaired (6) times the vehicle is now pulling to the right. *ak
06/01/1996205/01/1995
 Abs brakes failed, resultin gin extended stopping distance. *ak
07/12/1996
 The vehicle has been in the shop (11) times for brake problems. when driving the vehicle it pulls very hard/it fades and sometimes the brakes lock up. the system has abs. *ak
 Consumer was driving, when applying the brakes truck wouldn't stop, there is a grinding noise (abs anti-lock brake ) please describe .*ak
08/29/1996209/01/1994
 Anti-lock brakes failed, resulting in extended stopping distance, also passenger's seat belt did not retract/differential slipped and also replaced torque converter. *ak
 When applying the abs brakes, the vehicle pulls to the right. please describe. *ak
06/22/1995
 Brakes are spongy and they go down to the floor. the abs light and the brake light keep coming on. this happens on normal road conditions. *ak
09/21/1995609/18/1995
 Abs brakes inoperative, pedal goes to the floor when applied. left rear brake locks up and vacuum leak. up, and leaks fluid. experienced same problem 6 times, also rear wheel cylinder failed 3 times. *ak
 The windsheild wipers aren't working and the abs anti-lock brakes lock up . please describe .*ak
07/30/1996
 Upon applying abs brakes @ 45 mph, they locked upon not releasing. road surface wet at the time. please describe details.*ak
05/04/1996
 Abs, brake failure, rotors in vehicle continue to fail, causing extended stopping distance. *ak
04/01/1996
 When applying the brakes the vehicle pulls to left and then to right.the truck has abs.please describe. *ak
 Vehicle's abs braking system has excessive brake wear and caliper is freezing. *ak
05/31/1996
 Anti-lock brakes failed, causing all four wheels to lock up; resulting in an accident, airbag did not deploy; no warning/no lights came on dashboard. *ak
04/01/1996
 Abs brakes, when you apply force to the brakes the vehicle pulls to the left. *ak
04/03/1996
 Abs warning light is constantly on while vehicle is driven, intermittently brake pedal will go to the floor. *ak
03/02/1996
 The abs was causing the vehicle to pull to the left or the right when the brakes were applied. please describe. *ak
03/29/1996
 Abs, brakes, frontal collision, impact 12:00 position, speed 35 mph, when brakes where applied front shook very and brakes lost effectiveness. *ak
03/04/1996
 When brakes are applied, vehicle will pull very hard to left & right causing loss of control, in for repairs front disc pads, master cylinder. *ak
 While driving the brakes felled completely they are rear abs brakes. *ak
08/20/19950
 Anti-lock brakes failed twice. *ak
11/25/1995
 The abs system does not work well. please describe. tt
11/09/1995
 The abs brake fluid gelled up and caused the brakes to seize and not work. please describe. tt
02/15/1995
 Abs: rotors get heat cracked and pads wear out every 5,000 miles. tt
01/15/1995
 Abs: brake shoes and pads have adjustment problem; causes pads to wear out prematurely; results in extended stopping; replaced 4 times within 38,000 miles. tt
 When consumer driving try to stop the abs anti-lock brake failed person hit a bus . tt
11/15/1994
 Abs: when braking, front wheels lock up; very dangerous during rainy weather; lost control; vehicle skidded. *ak
08/14/1995
 Abs, brake failure,disc pads wore out within less than 20,000 miles, rear brakes glazed. tt
06/28/19951
 The abs braking system light came on, and the next day the abs system failed, resulting in a vehicle accident. tt
05/16/19951
 Experienced extended stopping distance due to defective abs brake system. tt
04/29/1995
 Abs: anti lock brakes locked up; vehicle ran into ditch; seat belt did not hold; airbag did not deploy; vehicle totaled. tt
10/01/19941
 Abs system failure, resulting in extended stopping distance. tt
1
 While driving, brake action seems inadequate, upon braking pedal goes almost all the way down before vehicle comes to halt, extending stopping distance. tt
11/28/1994
 Abs anti-lock fail about seven time truck still go to left side when press on brake purchase truck 11/28/94 . tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
03/21/199725
 When backing or parallel parking and going at idle speed, brakes do not work. the vacuum pump does not supply adequate suction. *jg
402/01/1995
 Truck exhibits serious pull to the left when braking. been for service several times, replacing entire braking system, spent $2000+ on repairs, problem goes away for a couple months then comes back. truck cannot be safely driven because the brake pull is so serious. hitting the brakes can make the truck change lanes to the left (oncoming traffic). cannot afford to dump more money into repairs for a problem that does not seem repairable (out of warranty). saw many complaints on internet of same problem. dodge must issue a recall. very dangerous problem making lemons out of 4-5 year old trucks. please help.
 Consumer says while driving under any driving conditions the brakes fade out and come back in when applied,the pedal goes to the floor, giving no response and then it will pump back up on its own to respond. the dealer has not been contacted. *ak
105/21/1998
 Brake system will not stop in emergency stopping.
11/18/1998803/01/1995
 3500 - started at 6000 miles the front brakes wore out. replaced with new ones. then again at 12000 miles front brakes, rotors, replaced. then at 20000 miles calibers, brake pads, and rotors replaced. at 30000 miles master cylinder, brake hoses, replaced. again at 40000 miles all the above replaced. at 50000 miles brake pads replaced again. at 60000 miles everything checked, tires changed, and still the truck pulls to the left at braking. contacted dodge customer service telling them what has happened. they said they could not help me. a service bulletin had been issued months ago pertaining to this problem but the dealer refused to help.
08/02/19951
 Brake assembly failed.
109/01/1994
 Brakes failed causing noise in the front wheel area.
03/02/1998
 In a sudden stop when braking the vehicle sways to the left side, almost resulting in an accident, cause unknown. dlr replaced shims/ front brake pads/ rotor and control arm, etc. dealer cannot determine problem. *ak
 Brakes pull unevenly.
12/31/1996110/07/1995
 Braking system not designed to operate when vehicle is full.
 Driver's side front brake is the only operative brake. cause unknown.
12/30/1996
 When applying the brakes the vehicle will pull to the left or right and cause the vehicle to go into another lane of traffic. *ak
08/07/19961
 Brakes are spongy, causing driver to use excessive force when applying brakes/extended stopping distances.
07/30/1995
 When brakes are applied the truck pulls to the right. *ak
07/21/19951
 Brakes pull to one side or the other, causing excessive wear. *dsh
04/04/19964
 Brakes squeak pull vehicle to the left. *sd
12/26/19956
 Truck pulls when brakes are applied, causing loss of control. *dsh
09/01/1995
 Vehicle pulls to the extreme left when braking, dealer cannot fix. tt
 When braking truck pulls to left . tt
08/01/1995
 When brakes are applied vehicle pulls to the extreme left. tt
12/13/1995
 When applying the brakes the truck pulls to the right and it shimmys violently. please describe. tt
01/11/1995
 Brakes keep overheating causing them to lock replaced calipers once and whole brake system twice. tt
03/02/1995
 After applying brakes several times, brake system fails. tt
06/01/1995
 When brakes are applied vehicle pulls to the extreme right. tt
07/24/19951
 Vehicleswerves into oncoming traffic under heavy braking. *ak
05/25/1995
 Warped front brake rotors/pads, causing vehicle to vibrate upon braking. *ak
01/31/1995
 The brakes went out at 6000 miles. please explain. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
07/01/199505/01/1995
 This vehicle from time of purchase will swerve side to side when the brakes are applied at speeds over 40 mph. you can't tell which way it will swerve on the sudden application of the brakes. dodge will not even talk about it even though i have brought it to their attention from the time i bought the vehicle. it is a hazard. *ak
10/08/199802/01/1996
 Summary not provided by consumer
04/25/199802/01/1995
 While driving left front brakes malfunctioned. the brake rotors and pads were destroyed. the dealer and manufacturer have been notified. *ak
11/01/1997105/12/1998
 Abs brake failure. also front brake calipers/pads and rotors malfunctioned. in addition, distributor cap points plugs wires needed replacement.
04/08/1995503/01/1995
 Service bulletin 0500995b. during brake application vehicle pulls to the right. *ak consuner states after continous repairs by dealership and private mechanic problem continues to re occur, the last dealer stated that they have trucks with the same problem and no fix is known dealer has placed proble in the hands of maufacturer.*jb
02/01/1996
 Abs, brake failure, yellow and red lights stays on, in for repair 23 times, rotors and calipers and dis pads and shoes in rear. *ak
06/28/1995
 Electrical short, faulty wiring harness , causing the front brakes to lockup, impact 12:00 speed 25mph. tt
 Front wheels of truck covered with brake dust because the back brakes were not working properly. tt
07/18/1995
 The front brakes leak and cause pulling to the right and it shimmies when they are applied. please describe. tt
05/16/19951
 Warped front brake rotors/pads, causing vehicle to vibrate upon braking. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
05/17/1996105/21/1998
 Brake caliper leaking.
12/30/1996
 When driving calipers hang up, they do not rlease brakes but pull the truck to one side, destroying metal disc rotors. *ak
10/20/19951
 Vehicle pulls to extreme left when braking, also vibrates, replaced frontbrake calipers (other vehicle from 979384). *ak
 The transmission line had to be replaced its diesel the front disc brake wears out consumer thinks have a brake caliper problem . tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
07/20/19951
 Right rear brake shoe assembly failed.
08/19/1998107/15/1995
 Brakes started scrapping and making noise, the inside pads on front were grounded into the rotor, metal against metal, dealer contacted and cannot duplicate the problem. consumer made repairs, contacted manufacturer and they cannot duplicate the problem. *ak
11/14/19946
 Whenever brake pedal is pressed downward to slow or stop vehicle, it would not stop. vehicle would coast, instead. took to dealer & service manager said that the brakes had faded. the brakes were a constant problem. had the brake pads replaced, but the problem was not solved. *ak
09/09/1997712/15/1994
 Abs brakes failed, causing vehicle to pull to the right. also, replaced front brake pads. *ak
102/01/1996
 Brake pads/drums failed.
01/12/1996
 Applied the brakes and the pads are wearing out and vehicle shakes; the vehicle has extended stopping and also the vehicle pulls to one side. *ak
6
 For the sixth time the brake rotors/pads and drums were replaced . please describe . *ak
09/30/19950
 Brakes pull to left when stopping, due to failed pads/rotors. *dsh
02/15/1995
 Abs: rotors get heat cracked and pads wear out every 5,000 miles. tt
01/15/1995
 Abs: brake shoes and pads have adjustment problem; causes pads to wear out prematurely; results in extended stopping; replaced 4 times within 38,000 miles. tt
08/14/1995
 Abs, brake failure,disc pads wore out within less than 20,000 miles, rear brakes glazed. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
09/29/1997
 Driving at approx 55 mph went to push brakes,pedal went to floor, no brakes, no rotors. had to pull emergency brake in order to stop. there was no warning. mechanic repaired vehicle, replaced all new brakes, new rotors also replaced. *ak
05/20/1997102/01/1996
 Brake rotors failed.
6
 For the sixth time the brake rotors/pads and drums were replaced . please describe . *ak
11/05/1995
 Abs: brake rotors and pads on left side have completely worn out 10,000 miles; brakes pull to left; one occasion, locked up. *ak
02/15/1995
 Abs: rotors get heat cracked and pads wear out every 5,000 miles. tt
01/15/1995
 Abs: brake shoes and pads have adjustment problem; causes pads to wear out prematurely; results in extended stopping; replaced 4 times within 38,000 miles. tt
 Rear brakes don't activate upon application w/rotors, calipers and other brake components replaced. please describe details. tt
05/16/19951
 Replaced front brakes/turned rotors. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
08/13/20021
 While driving and when brakes were applied they did not hold, pedal went all the way to the floor, consumer stated the vehicle coasted through a red light through a busy intersection, this was caused by a hole in the brake line, which was the result of the way the brake line was assembled.*ak. consumer stated the 4x4 did not work, the tire blew out, there was a water leak and the carpet had to be replaced twice, the rear window was replaced, the rear brakes never worked, the radio was inoperative, the hood light flickered while driving, and also vehicle experienced transmission problems.*jb
03/02/1997107/01/1995
 Now my air contioner has a musty smell and does not blow out cold air,
102/01/1996
 Brake pads/drums failed.
04/01/19951
 Rear brakes failed. *skd
 Front wheels of truck covered with brake dust because the back brakes were not working properly. tt
04/14/19951
 Truck pulls very hard to right while driving, in for repair found a brake problem no means of repair at present. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - DRUM
08/16/19951
 Rear brake drums failed.
6
 For the sixth time the brake rotors/pads and drums were replaced . please describe . *ak
 Purchased truck new at 9,000 miles and replaced the transmission and the two back drums , there is a leak rear window of the truck, sometimes power window doesn't work . please describe .*ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - SHOES/LININGS
05/16/19951
 Replaced rear brake shoes. *ak
05/16/19951
 Replaced brake shoe/drum lining. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - WHEEL CYLINDERS
 When the brakes are applied they grab. the rear brakes release, causing the front brakes to do all of the work, resulting in extended stopping distance. the dealer has replaced the rear wheel cylinders and the power booster. the dealer has been made aware of the existing problem. *ak
09/21/1995609/18/1995
 Abs brakes inoperative, pedal goes to the floor when applied. left rear brake locks up and vacuum leak. up, and leaks fluid. experienced same problem 6 times, also rear wheel cylinder failed 3 times. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
06/02/200252688111/01/2000
 Rusted brake lines caused brake fluid leakage. *tt *jb *ts
08/13/20021
 While driving and when brakes were applied they did not hold, pedal went all the way to the floor, consumer stated the vehicle coasted through a red light through a busy intersection, this was caused by a hole in the brake line, which was the result of the way the brake line was assembled.*ak. consumer stated the 4x4 did not work, the tire blew out, there was a water leak and the carpet had to be replaced twice, the rear window was replaced, the rear brakes never worked, the radio was inoperative, the hood light flickered while driving, and also vehicle experienced transmission problems.*jb
11/13/20011
 When brakes were applied pedal went to the floor, resulting in extended stopping due a defective brake line. .*ak *jg
02/08/1999103/01/1995
 The brake hose failed because of a design defect. the bracket that is part of the hose assembly causes a bend in the hose that forces the hose to contact the wheel wearing a hole in the hose. the replacement hose is designed to eliminate this bend. the right hose is designed the same way. apparently, chrysler found this problem and corrected it but did not recall the defective parts. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
 When the brakes are applied the pedal goes to the floor, resulting in extended stopping distance. also, dealer has replaced the master cylinder and the problem still exists. the manufacturer has been notified. *ak
10/14/1997
 Master cylinder which hooks to the brake pedal broke, causing loss of braking ability, resulting in the brake pedal traveling to the floor board. consumer has replaced the rod. please provide further details. *ak
108/29/1995
 Brake master cylinder failed. *dh
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
08/01/1995106/01/1995
 Coming to stop at stop light, brake pedal is situated too close to gas pedal, brake pedal went clear fly to floor & below gas pedal, hit gas pedal instead, vehicle hit another vehicle, was unable to stop vehicle. air bag did not deploy. *ak
05/16/19951
 Brake pedal low and vehicle has no braking power.
SERVICE BRAKES, HYDRAULIC - POWER ASSIST
03/21/199725
 When backing or parallel parking and going at idle speed, brakes do not work. the vacuum pump does not supply adequate suction. *jg
1
 Brakes continue to fail although many components have been replaced (vacuum lines,pump,booster,rotors,master cylinder) resulting in grabbing, fading, and pulling.
06/16/19956
 Vacuum pump output to the power brake booster was below the minimum of 8.5 to 25 inches vacuum.*sd
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM
05/30/199803/01/1996
 Power brake vacuum boost failure. hose that connects belt driven vacuum pump to the brake boost cannister was partially collapsed. truck had been taken to the dealer 2 months earlier for loss of boost in braking system. dealer claimed braking system was operating properly. truck was involved in accident on 5-30-1998. traffic situation was stop and go. brakes had been applied once, and then had to be applied again. truck could not be stopped from 6 car length distance from 30 mph - about 100 ft. brakes had lost all boost and even both feet applied as hard as possible only provided marginal braking. after the accident i found out that there has been a recall (97v06800) on some 1995 dodge ram diesel trucks to add an external check valve to the vacuum pump and replace the hose with an oil resistant version. chrysler claims that since my truck was not recalled (it has pump with internal check valve) they are not repsonsible to repair. it is clear that even with the internal valve, over time some amount of oil mist gets into the hose an causes it to weaken, resulting in collapse. the vacumm pump interanl bearing is lubricasted by an engine oil feed. the check valve does not completely contain all oil vapor from entering the hose. chrysler obviously knows this by including a oil resistant hose in the recall kit. however, that trucks not included in the recall were left on the road with a standard non-oil resistant vacuum hose. i have talked to numerous other dodge truck owner who have had the vacuum hose collapse on trucks that were not included in the recall. i have written to chryler in this matter, and all they have stated is that since my truck was not part of the recall they are not responsible. they stated that since nhtsa did not ask for recall of all 1995 trucks they have not taken any action on these models. also have written to susan cishke director of certification compliance and saftey affairs and did not get any response. i have retained the failed hose.
02/19/19991
 Loss of vacuum to power brake booster. (consumer is attorney).
 When the brakes are applied they grab. the rear brakes release, causing the front brakes to do all of the work, resulting in extended stopping distance. the dealer has replaced the rear wheel cylinders and the power booster. the dealer has been made aware of the existing problem. *ak
01/30/19960
 'grunch' noise in the brake vacuum booster. *sd
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM - HOSES, LINES/PIPING, AND FITTINGS
04/17/2000
 Recall 99v214000/front suspension. dealer did not properly install the vacuum hose line into the clips on the right side. also, rubber gromet on the coil spring was not seated properly on the left side. manufacturer has been notified. *ak
06/05/19973
 Recall #97v068000) oil gets into the vacuum hose line & causes brakes not to work properly. took to independent mechanic & had brakes replaced. brakes are still not stopping vehicle. problem still exists. *ak