Fleetwood Gear Box 300fs

Model Gear Box 300fs made by Fleetwood got 3 consumer complains there is 1 investigation as well as 1 recall. Consumer complaints with reference, among others things, to steering, structure and suspension. The car had one investigation (equipment). There was one recall concerning equipment .

Model 2004

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
EQUIPMENT - OTHER - LABELS
03V438000FLEETWOOD ENTERPRISES, INC.from 08/04/2003 to 09/12/2003V (Vehicle)5411/04/2003MFRFLEETWOOD ENTERPRISES, INC.11/04/200311/05/2003567
Defect SummaryCertain travel trailers fail to comply with requirements of part 567, certification. the incorrect gross axle weight rating (gawr) was printed on the label. the correct gawr weight figure should be 5080 lb per axle.
Consequence Summary
Corrective SummaryOwners are being provided with correct labels and installation instructions. if an owner is not comfortable installing this label, they can take it to their dealer and the dealer will install it at no charge. owner notification is expected to begin during november 2003. owners should contact fleetwood at 1-800-444-3307.
NotesFleetwood recall no. 31027.customers can also contact the national highway traffic safety administration

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
EQUIPMENT - RECREATIONAL VEHICLE
PE06005FLEETWOOD ENTERPRISES, INC.01/20/200605/02/2006INADVERTENT SLIDE-OUT EXTENSION MOVEMENT
 This investigation was opened based on odi's receipt of a congressional letter on behalf of a constituent.the constituent reported incidents where the slide out room of his motor home would inadvertently move (extend) during highway use.odi was concerned that a fully extended slide out would degrade the vehicle's dynamic handling characteristics and/or possibly impact an object or another vehicle, resulting in a crash.odi contacted fleetwood and discovered that slide out rooms were installed in motor homes, travel trailers and folding trailers. as part of the investigation odi visited a rv show and the fleetwood paxinos plant to examine slide outs in various new make and model vehicles and gain an understanding of how the systems work.during the investigation odi learned that there are two methods used to extend slide out rooms.some manufacturers use hydraulic systems and others, such as fleetwood, use an electric motor. (continued on page 2)

Consumer Complaints


Fail datemilesoccurencesPurchase date
STEERING - GEAR BOX (OTHER THAN RACK AND PINION)
01/01/19011
 Consumer complaint regarding extensive mechanical issues with 2005 fleetwood trailer . *ts the gear box model number is 335fs. *nm
STRUCTURE
05/01/20051400107/23/2004
 The consumer noticed that it was a real effort to tow the trailer as it was frequently swaying. the bottom of the diamond plate bent. ***nar received 10-18-05*** *ts the consumer used the trailer for four trips totaling 1400 miles. during the third trip the consumer noticed that the tongue of the trailer was bending upward causing the diamond plate at the front of the trailer to pinch-up. on the fourth and last trip the with the trailer in may the consumer noticed significant bending of the bottom of the diamond plate and bending higher up on the diamond plate. the consumer's brother purchase a trailer just like the consumers and was experiencing the same problem. he determined that the trailer was too heavy at the hitch pin. based on the consumer's complaints the manufacturer agreed to voluntarily repurchase the consumer's trailer. *nm
SUSPENSION
05/01/20051400107/23/2004
 The consumer noticed that it was a real effort to tow the trailer as it was frequently swaying. the bottom of the diamond plate bent. ***nar received 10-18-05*** *ts the consumer used the trailer for four trips totaling 1400 miles. during the third trip the consumer noticed that the tongue of the trailer was bending upward causing the diamond plate at the front of the trailer to pinch-up. on the fourth and last trip the with the trailer in may the consumer noticed significant bending of the bottom of the diamond plate and bending higher up on the diamond plate. the consumer's brother purchase a trailer just like the consumers and was experiencing the same problem. he determined that the trailer was too heavy at the hitch pin. based on the consumer's complaints the manufacturer agreed to voluntarily repurchase the consumer's trailer. *nm

Car dealers selling


StateCityZipNamePhone
CASANTA FE SPRINGS90670MIKE THOMPSON RV562-921-0955