Ford E350 1988

Model E350 made in 1988 by Ford got 15 consumer complains, 4 investigations there is 1 recall as well as 6 service bulletins. Consumer complaints with reference, among others things, to electrical system, engine and engine cooling and fuel system, gasoline. Technical service bulletines regarding engine and engine cooling, equipment and service brakes, hydraulic. The car had some investigations: electrical system, service brakes, hydraulic. There was one recall concerning electrical system .

Model 1988

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ELECTRICAL SYSTEM - WIRING
89V062000SENTINEL VEHICLES LIMITEDfrom 01/01/1983 to 02/01/1989V (Vehicle)22806/01/1989ODIFORD MOTOR COMPANY04/17/198904/25/1989
Defect SummaryNylon ties that support the main wiring harness to the chassis could wear and break due to excessive vibration. thus, wiring harness could fall on engine components and short circuit.
Consequence SummaryThis could cause loss of electrical system which couldresult in an underhood fire.
Corrective SummaryInstall retrofit rit of plastic-coated metal clamps, loom for positive battery cables and re-route wiring.
NotesSystem: electrical wiring/harness.vehicle description: type ii and iii ambulances built on ford chassis.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
9552403/01/199539892There may be a concern of poor performance, coolant in the oil and engine knocking and/or hydraulic lock on some vehicles. *tw11/01/1995
BC289395040104/01/19953055240Unknown11/01/1995
EQUIPMENT - MECHANICAL - WRECKER AND WHEEL LIFT DEVICES
985A1203/18/1998601010Recommended guidelines for towing behind recreational vehicles. *tt06/29/2000
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
985A2903/18/1998601036Some vehicles may exhibit excessive brake pedal travel, irregular front lining wear, and brake pull. *yc06/23/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
985A3803/18/1998601045Front caliper piston boots damaged. *yc06/23/1998
UNKNOWN OR OTHER
9721501/20/199751401Diagnostic guides for out-of-warranty vehicles to be used as a master copy - diagnostic guides no longer available from adistra. *tw06/27/1997

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
ELECTRICAL SYSTEM
EA93014FORD MOTOR COMPANY06/04/199307/29/1994ALTERNATOR BELT FAILURE
 There is no summary currently available
SERVICE BRAKES, HYDRAULIC
PE91077FORD MOTOR COMPANY05/23/199110/31/1991LOSS OF BRAKE EFFECTIVENES
 There is no summary currently available
EA91044FORD MOTOR COMPANY10/30/199110/30/1992LOSS OF BRAKE EFFECTIVENES92V026000
 There is no summary currently available
SQ99005FORD MOTOR COMPANY02/10/199909/21/2001FRONT BRAKE FADE
 Front brakes can fade

Consumer Complaints


Fail datemilesoccurencesPurchase date
ELECTRICAL SYSTEM - IGNITION
06/01/19941
 Ignition does not turn easily, sticks in start or accessory position, also, accessories fail when stuck in accessory position. *dsh
ELECTRICAL SYSTEM - WIRING - FRONT UNDERHOOD
05/17/1996101/01/1993
 Wiring harness shorted, causing fire.
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE
01/23/200531545101/20/2005
 I have just purchased a 1988 escaper 26ft c class motorhome on a ford e350 chassis. the vehicle has only 30,000 miles on it and was purchased from a private party in california. i was returning with it to my home in texas when just outside of phoenix a fire broke out underneath the vehicle. the fire was put out, but extensive damage occurred. it appears the exhaust system had melted the insulation on the floorboard and the fire started there. the inspector who performed the initial inspection and informed me that the ford motorhomes that year and the next were prown to exhaust fires because they had no secondary heat shields around the converter/muffler, and that the later year models were equipped with them. can this be true? and is there any recourse against the manufacturer? thank you. *ak
FUEL SYSTEM, GASOLINE
 The car was parked and a neighbor called the owner and told him his car was on fire. the fire was in front by the steering. tt
SERVICE BRAKES, HYDRAULIC - ANTILOCK
10/01/1996203/25/1995
 Upon applying force to the brake pedal the pedal goes to the floor, causing extended stopping distance and brakes fading away. after pumping the brakes, the consumer noticed the brakes were functioning. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
05/28/19965
 Rebuild front disc caliper. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
05/28/19965
 Replaced front/rear disc pads. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
05/28/19965
 Turned front disc rotors. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - WHEEL CYLINDERS
05/28/19965
 Rebuild rear wheel cylinders. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
05/28/19965
 Replaced master cylinder. *ak
SUSPENSION
08/18/2004110000
 Tl*the contact owns a 1988 ford e350. the front end of the vehicle shimmied while driving at various speeds. the failure usually occurs when driving over bumps. he took the vehicle to the dealer on numerous occasions and various repairs were made to the steering components. none of the repairs have successfully remedied the failure. the dealer stated that the vin was not included in nhtsa campaign id number 88v015000 (suspension). the contact would be responsible for the repair costs. the vehicle has not been repaired. the failure mileage was 110,000 and current mileage was 135,000.
SUSPENSION - FRONT
12/15/1995
 The driver skid off the road and bumped a tree. then the van went up in flames. please describe. tt
VEHICLE SPEED CONTROL
04/15/1999101/01/1998
 Throttle failure resulting immediate drop to fast idle speed.
VEHICLE SPEED CONTROL - CABLES
03/01/1999
 While driving throttle cable popped out of the plastic bracket,(which there wasno part holding down the throttle cable, causing vehicle to idle and loss of power. ths could have resulted in a crash. same incident happen to a ford bronco. please provide further information. *ak