Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, AIR - DISC - ROTOR
984503/02/1998601264Availability of hub-mount brake rotor machining equipment. *yc07/15/1998
SERVICE BRAKES, HYDRAULIC - ANTILOCK
985A5103/18/1998613022On some vehicles repeat repairs may be made to 4-wheel anti-lock braking systems (4wabs) due to misdiagnosis of 4wabs concerns which may result in replacement of functional components. *tt06/16/2000
9521210/01/199546478The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par04/25/1996
BC010696010212/01/199546431Econoline w/ 4wabs may be experiencing false abs codes which will activate the abs light. if an econoline has all of the codes in memory: b1342, c1222, c1115, & c1226, do not replace the module, clear codes. a revised module is under devel04/25/1996
SERVICE BRAKES, HYDRAULIC - ANTILOCK - ABS WARNING LIGHT
9672103/25/1996613342Concerns with the anti-lock brake system (abs) lamp remaining on after the vehicle is started and six (6) abs codes are stored in memory on some vehicles. *tt06/21/2000
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
9919409/20/19996090082Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt03/06/2000
985A1103/18/1998601009Service tip information regarding elimination of sanding rotors and drums. *yc06/17/1998
9622210/21/199650941Brakes - elimination of sanding rotors and drums - service tip. *tw06/17/1997
9531502/01/199539225New diagnostic procedure for brakes pulling or drifting. *tw03/31/1995
BC407495010301/01/199537906Brake shudder. *tw02/08/1995
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
985A1303/18/1998601012The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc06/17/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
981401/19/1998605562Subject regarding the availability of hub-mount brake rotor machining equipment. *tt07/09/1999
985A503/18/1998601003Hub-mount brake rotor machining equipment from rotunda is now approved for warranty and service use. *yc06/17/1998

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, HYDRAULIC - ANTILOCK
05/30/200340000108/18/1995
 Steering column: anti-lock brake light on all the time, airbag light blinks in a pattern, horn and cruise control quit working at the same time. transmission: transmission shudders when shifting gears in the higher gears.*ak
08/02/2002
 Abs light had come on, and the will stay on for a while before turning off. contacted dealer. *aki
10/24/199501/01/1995
 Abs warning light comes on during operation, no set pattern. i have had the vehicle serviced numerous times since it was new, each time it is ok for a short period of time, then the situation continues. i have spoken to several ford service managers, had the vehicle serviced last at magic city ford where several parts was replaced in an attemp to solve the problem. to this day the problem still exist. this is a very serious problem in that you can never tell if the abs system is really failing or if this is a false alarm. any assistance will be appreciated.*ak
05/15/20005
 While driving about 45 mph and when applying brakes pedal, brakes started making noise, like metal to metal grinding. *ak
02/15/2000404/01/1995
 Steering column: anti-lock brake light on all the time, airbag light blinks in a pattern, horn and cruise control quit working at the same time. transmission: transmission shudders when shifting gears in the higher gears. *ak
01/31/2000211/01/1997
 Failed abs,diagnostic code c1206. *ak
10/28/199908/01/1994
 Vehicle was taken in for service due to brake failure & noticed the ball joints were loose. *ak
11/21/19984
 Abs brakes fail to work. every time brakes are applied they do not grab. have taken vehicle to dealer & informed the computer chip is defective and needs to be replaced. *ak
08/15/1998203/01/1997
 Mechanic indicates abs computer module has failed
02/01/199502/01/1995
 Abs braking light comes on intermittently, and the air bag light has remained on since 30k miles. dealer cannot determine the problem. also problems with hand brakes. cruise control doesn't always engage, but when it does, it is difficult to return it to the original position. *ak *ml
05/25/1998
 Abs light comes on very intermittently, the dealer contacted, and stated the system should be replaced, and cannot duplicate the problem. *ak
05/15/1995
 When brake are applied, the abs light comes on. it took six tries for the dealer to locate and correct an electrical problem with the abs. also, experience two transmission problems where the vehicle gets stuck in low gear and the engine overheats.
03/13/1998
 Abs brakes; when applying brakes in a panic stop, brakes fail to stop the vehicle. mechanic at dealership blamed the brakes failing on uneven tire wear frpm when tires were rotated. *ak
09/24/19973
 While braking vehicle using abs brakes, vehicle would not slow down; it would pick up speed. although this happens at low speeds only (30mph or less). took to dealer 3times & nothing was found. *ak
09/24/19972
 Abs: braking on wet/damp pavement, vehicle would pick up speed; did not slow down. happens at 25 mph or less. took to dealer & nothing was found. *ak
01/25/1995
 Abs: whole front end of van shakes violently and pulls to right when applying brakes. *ak
06/01/199410
 The brake has failed ten times dealer can't find problem have abs anti-lock . tt *jb
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
05/15/1999205/01/1995
 This van would be considered a lemon if all of this happened within two years. first the door lock fell out, then the rearview mirror fell off, then the wrong fuse size had been installed and the the car could not started and all electrical systems failed. this all happened in the first year of ownership. after that all the ball joints had to be replaces the following year. after that the brakes failed due to too light a duty brake being installed on a conversion van. in 1998 the transmission started to go out, it has not completely gone out yet. it shudders on light to moderate acceleration. the dealer says it is probably the thrust converter. in june 1999 the fuel pump went out. the dealer said that it had been improperly installed at the factory because of corrosion. the car pump went out on a two lane 6% grade going down hill causing the power steering and brakes to practically fail do to no power. the courtesy lights have now failed and we are unable to turn any of them on. we are worried about an electrical fire due to the short. we want ford to offer to pay for fixing these items. there are many service bulletins regarding all of these things.
07/25/19971
 Brakes failed.
10/24/19954
 Brakes squeal, also grab when applied. *sd
10/24/1995106/06/1995
 Applied brakes, they grabbed shortly, then pedal went to the floor, causing an accident. tt *slc
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
09/24/2001
 When applying brakes they will shudder, and pulsate. replaced rotors because they were warped. vehicle was having brake problems again. this time consumer could smell something burning underneath vehicle. replaced calipers. consumer took vehicle in several times for brakes within warranty period,and problem still was not remedied. contacted dealer, and dealer stated nothing could be done. *ak
05/15/20005
 While driving about 45 mph and when applying brakes pedal, brakes started making noise, like metal to metal grinding. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
1
 While backing up the left rear wheel locked, consumer pulled the brake drum and found the the bonded lining was not attached to the brake shoe causing loss of braking ability.
10/02/1997110/02/1997
 While driving the rear brake pads became unglued from the brakes shoes and jammed up the brakes, making the brakes hot and smelly. when taken to dealership, dealership would not correct problem. dealer stated that this was normal wear on brakes. the owner replaced the brake shoes on 10/8/97. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
04/01/199703/20/1994
 Defective front brake rotors, causing brakes to vibrate. *ak
05/01/19961
 Warped front brake rotors, causing severe pulsation/vibration when brakes are applied. *ak
07/05/1995
 Brake system failure, excessive wear drums and rotors, intermittent loss of brakes. tt
04/10/1995
 Brake system failure, has defective rotors. tt
12/27/19941
 Front rotors and pads replaced due to front end vibration while braking. *skd
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
 The rear right brake, jams with smoking . tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - DRUM
07/05/1995
 Brake system failure, excessive wear drums and rotors, intermittent loss of brakes. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
 Tried to back up and the left rear wheel locked, pulled the brake drum and discovered that the bonded brake lining was not attached to the brake shoe, causing brake lost.
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
02/01/199502/01/1995
 Abs braking light comes on intermittently, and the air bag light has remained on since 30k miles. dealer cannot determine the problem. also problems with hand brakes. cruise control doesn't always engage, but when it does, it is difficult to return it to the original position. *ak *ml
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE WARNING
07/25/19971
 Brake lining failed, preventing vehicle from moving forward/backwards.