Ford F Series 1975

Model F Series made in 1975 by Ford got 3 recalls. There were some recalls concerningengine and engine cooling, service brakes, air and suspension.

Model 1975

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ENGINE AND ENGINE COOLING - COOLING SYSTEM - FAN
78V153000FORD MOTOR COMPANYfrom 08/01/1970 to 09/01/1977V (Vehicle)12500011/02/1978MFRFORD MOTOR COMPANY07/03/197810/12/1979
Defect SummaryThe engine cooling fan blades may crack and chip due to high stresses caused by vibrations. the chipped pieces of the blade could fly into the underhood components. also, these pieces could fly out from the vehicle if the hood is open and the engine is running.
Consequence Summary
Corrective SummaryThe dealer will replace the existing fan blade assembly with one of another design at no cost to owner.
NotesVehicle description: heavy trucks.system: engine cooling; fans.consequences of defect: the blade fragments could cause engine damage and, ifhood is open, serious personal injury to nearby persons.
SERVICE BRAKES, AIR - ANTILOCK - CONTROL UNIT/MODULE
79V077000FORD MOTOR COMPANYfrom 02/01/1975 to 03/01/1979V (Vehicle)6500011/09/1979MFRFORD MOTOR COMPANY03/29/197910/12/1979
Defect SummaryCertain air brake anti-lock modulators could malfunction during operation of the anti-lock system. a nylon piston within the modulator air valve system can swell from exposure to system contaminants. continued exposure may cause the piston to swell to the extent that interference with the cylinder wall will result, causing momentary sticking or a permanent jam. this can result in temporary or permanent loss of braking for the affected axle.
Consequence Summary
Corrective SummaryThe pistons in the valve portion of the modulators will be replaced with pistons that do not swell when exposed to air brake system contaminants.
NotesVehicle description: heavy trucks equipped with anti-lock air brakecontrollers.system: service brakes; control assembly.
SUSPENSION - FRONT - SPRINGS - LEAF SPRING ASSEMBLY - HANGER,BRACKET
76V035000FORD MOTOR COMPANY V (Vehicle)1191103/17/1976MFRFORD MOTOR COMPANY03/03/197610/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesFord campaign no 185.1974, 1975 b series and 1975 f series.trucks and buschassis.possibility that the front spring hanger bracket on which the channeland side plate components are insufficient secured with upset rivets.if thiscondition exists, brackets installed on vehicles with frame reinforcements atthe location of bracket attachment could become loose and crack in severe dutyservice.this cracking may result in complete separation of bracket fromframe.this,in turn, could allow front axle displacement or separationfromvehicle with loss of steering control with little or no warning to driver.in addition, ford parts and service division has reported sales ofapproximately 1,500 suspect spring hanger brackets as replacement parts for1967 through 1973 model b-series vehicles.(correct by inspecting andreplacing hanger brackets with new fmvss 121 level components using specialbolts instead of rivets).