Ford Ford 1967

Model Ford made in 1967 by Ford got 1 consumer complain as well as 6 recalls. Consumer complaints with reference to other. . There were some recalls concerningequipment and seat belts.

Ford year 1967

Recalls
Consumer Complaints

Model 1967

Recalls

Campaign	Manufacturer	Manufacturing date	Type	# of units affected	Date Owner notified Mfg	Recall Initiated by	Manufacturers of recalled vehicles/products	Report Recieved Date	Record Creation Date
EQUIPMENT - MECHANICAL - JACKS
67V047002	FORD MOTOR COMPANY		V (Vehicle)	28570		MFR	FORD MOTOR COMPANY	05/10/1967	10/12/1979
Defect Summary
Consequence Summary
Corrective Summary
Notes	Possible that the sharp end of the jack handle could deform a stop in the rachet assembly and sub- sequently interfere with the pawl.this could cause failure after the jack had been used a few times.(replace jack column and case assembly.)
SEAT BELTS - FRONT - ANCHORAGE
66V004002	FORD MOTOR COMPANY test adw as		V (Vehicle)	65000	10/13/1966	MFR	FORD MOTOR COMPANY	10/06/1966	10/12/1979
Defect Summary
Consequence Summary
Corrective Summary
Notes	Possibility that certain self-threading seat belt attaching bolts may fail to hold.(replace with new design bolts.)
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM
67V018000	FORD MOTOR COMPANY		V (Vehicle)	217000		MFR	FORD MOTOR COMPANY	02/23/1967	10/12/1979
Defect Summary
Consequence Summary
Corrective Summary
Notes	Possibility that power brake booster may malfunction under cold weather conditions.this can be caused by sticking of an internal rubber control valve or by a delay in the action of the check valve.this malfunction could result in a considerable increase in the pedal pressure required to stop the car.(replace booster with redesigned unit.)
SUSPENSION - FRONT - CONTROL ARM - LOWER ARM
70V105000	FORD MOTOR COMPANY		V (Vehicle)	85000	09/01/1970	ODI	FORD MOTOR COMPANY	09/03/1970	10/12/1979
Defect Summary
Consequence Summary
Corrective Summary
Notes	Possibility that cracks can be induced in front lower control arms if frontsuspension is repeatedly subjected to very severe loading sometimesentercountered in police service.such cracking could ultimately result infracture through arm in ball joint area, and cause discon- nection betweenlower control arm and front wheel which would seriously hamper driver's abilityto fully control vehicle.(correct by replacing with a heavy duty improvedarm.)
SUSPENSION - FRONT - WHEEL BEARING
66V004007	FORD MOTOR COMPANY		V (Vehicle)	184	10/03/1966	MFR	FORD MOTOR COMPANY	10/06/1966	10/12/1979
Defect Summary
Consequence Summary
Corrective Summary
Notes	Possibility that front wheel bearing retaining nuts were over torqued, producing insufficient running clearance for the bearings.this condition can lead to noise, vibration, 'wheel pull', and, ultimately, to wheel bearing failure.(retorque to level specified.)
VEHICLE SPEED CONTROL
66V012000	FORD MOTOR COMPANY	from 08/01/1966 to 10/01/1966	V (Vehicle)	47300	10/17/1966	MFR	FORD MOTOR COMPANY	10/18/1966	10/12/1979
Defect Summary
Consequence Summary
Corrective Summary
Notes	Under certain circumstances the four barrel carburetor secondary throttle plates may stick in an open position when the engine is not fully warmed up.(replace linkage part involved).

Consumer Complaints

Fail date	miles	occurences
OTHER
		1
	Why do car manufactures have to help people use tobacco by providing ashtrays in the cars. this seems like an anti-trust issue. ak mr nlm dimsii ivoq entry posted after 12/12/02 cut-over to artemis740948