Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
9919409/20/19996090082Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt03/06/2000
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
0217609/02/200210008580Lamp-brake-invadvertent disabling of brake shift interlock. *mj08/05/2004

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - DRUM - SHOES/LININGS
03/07/200207/05/0200
 Location of brake lines---the tubing shown on the pictures are brake lines---the tubing was less than 1 on the steel plate--it was snagged and torn apart--it was snagged on a piece of re-bar that holds a concrete guard in place--the lines for the brakes drained so fact that the dual braking system did not work
SERVICE BRAKES, HYDRAULIC
11/15/201190000
 Tl- the contact owns a 2000 ford mustang. the contact stated that the abs module malfunctioned, causing the abs braking system to improperly activate. the contact stated that the abs warning light was also illuminated. in addition, the traction control malfunctioned. the contact took the vehicle to the dealer but the dealer could not remedy the problem. the dealer advised that the abs module needed to be replaced. the contact stated that the abs module for the particular year, make and model was no longer being manufactured and an aftermarket part was not available. the vin was not available. the failure mileage was 90,000. kmj
11/15/201190000
 Tl-the contact owns a 2000 ford mustang. the contact stated the abs module had malfunctioned causing the abs braking system to improperly. the contact stated the abs light illuminate on the dash board indicating a defect in the brakes. also the traction control malfunctions as well due to the abs module controlling the traction control system. the contact took the vehicle to the dealer and the dealer could not remedy the problem. the dealer stated the abs module needed to be replaced. the manufacturer no longer manufacturer the abs module for the year make and model. the contact stated there are no aftermarket abs module. the failure mileage was 90,000. jo
05/04/2008135001
 I 'm having problems with the brakes of my mustang gt 2000. this car has only 13500 driving miles and for three occasions i had been with the brakes because its has the sticking problems (front left side and rear right side). eventually the pads and calipers turned hot and brakes do not stop the car. the last time of this event the car was on an accidents and we went down on a hill and my car broke down the front part. i was reading in internet many people are having the same problems with mustang from 99-04. *tr
01/20/200650000311/15/2000
 1)break calipers stop functioning 2)break pads and rotors fail prematurely due to uneven wear 3)complete break job with replacement of caliper. *nm
06/18/200413056103/14/2000
 Problems with vehicle's power brake booster.*mr the brakes were noisy when used. the brake booster was replaced. *nm
SERVICE BRAKES, HYDRAULIC - ANTILOCK
08/03/20031
 While driving the vehicle at 45 mph another vehilce pulled out in front of consumer, causing consumer to slam on brakes. brakes locked, causing vehicle to skid. vehicle had extended stopping distance. dealer had been contacted.*ak
07/10/20031
 While traveling about 25mph in inclement weather tapped the brakes and vehicle skid into a guardrail. *ak
 While driving 35 mph the vehicles abs locked up. *nlm
12/18/2002103/01/2001
 Consumer stated without depressing the brake pedal the anti lock brakes locked up causing the consumer to have a vehicle accident. dealer notified. ts *tt
10/01/2000100006/01/2000
 Braking problem occurs most every time you come to a stop very dangerous. *ak
12/01/2001
 While driving on wet pavement and when applying brakes or making a turn vehicle skids out of control. contacted dealer. *ak
08/18/2001209/01/2000
 About 2 1/2 months ago my boyfriend was driving my car. he ask me if i had ever had the brakes not want to work on me i was driving and i came to a stop sign. there were 2 cars already setting at the sign. when i hit my brakes hard they did not go down as they normally would it felt like somethhing was keeping the brakes from working. i jerked the steering wheel to the right to keep from hitting the cars in front jumping a curb then it was like the brakes kicked in and started working and locked up.*ak
02/20/2001601/01/2001
 Vehicle will intermittently stall when i am attempting to come to a stop. when this happens i lose my power brakes and this has caused me to have to swerve to avoid hitting the car in front of me. this has happened at least 6 times. dealer replaced fuel pump the first time. the second time the idle air control valve. and third the same iac valve. it will still stall. i believe this to be a serious safety issue and am filing the lemon law.*ak
01/20/2001
 When attempting to apply brakes a loud popping sound is emitted. speed at time of braking is not a factor. please provide any additional information. *ak
06/12/2000404/01/2000
 When braking while making a sharp turn in either direction, brakes will vibrate violently and fail to stop the car. when reapplied the brakes operate as intended. has happened four times and i had the dealer look into problem when vehicle was in service for an unrelated problem. dealer reported that they found nothing wrong with the brakes. *ak
05/27/2000104/01/2000
 Car was parked in driveway. manual transmission was in gear and parking brake set. driveway is approximately 30 degree incline. auto rolled on its own approx 40 ft down driveway anh hit a tree. ford failed to accept any defect responsibility in may. today i read that ford is recalling mustang brakes and there have been no reported incidents. i have been unable to get ford to acknowledge any responsibility.*ak
06/29/20000
 When applying brakes gear skipped and and brakes became loose. no braking power. also, consumer was having electrical problems which caused defects in the alarm.*ak
07/25/2000206/01/2000
 Car was left parked on slight incline with emergency brake engaged and in gear, when suddenly without warning the car began rolling and hit sign post.
10/17/20000
 While driving front passenger's tire locked up and vehicle slid. consumer had a flat spot in the tire.*ak
09/13/2000
 Consumer was traveling about 42mph on highway and another vehicle was merging into another lane, and vehicle in front applied the brakes. vehicle in back hit, and there was a five car pile up. consumer was the last of the chain link, and driver's side airbag didn't deploy.*ak
08/28/2000204/06/2000
 While driving back wheels locked on her, causing smoke to form inside of automobile. automobile was not driveable.*ak the cause for rear wheel noise is determined to be rear end assembly failure. *yh
01/01/19991
 Emergency brake lever stayed up, and the brakes were not engaged. also, multi- function switch was replaced, and windshield wipers fluid will constantly come out onto the windshield. *ak
05/19/2000
 While driving braking system malfunctioned, causing extended stopping distance, which may cause a crash. please provide further information. *ak
01/08/2000
 Vehicle experienced brake problems. replacement had to be made on both front calipers, and brake lines due to fluid leakage. also a loud rattling sound came from the wheels after repairs were made. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
06/01/2000206/15/2000
 When applying brakes at any speed, vehicle pulls to left or right. this has happened several times. dealer has replaced front brakes and tires, but problem still exists.*ak the vehicle also had an alignment. consumer was told that all mustangs with 17 inch wheels pull when braking. *jg
110/22/1999
 Consumer states brakes were grinding and there was an odor that smelled like brakes were burning. *jb
03/05/2001
 Brake problems prior to accident, brakes would lock up, and stayed locked even after foot taken off brake pedal. took vehicle to dealer twice, could not find anything wrong. while driving about 37 mph vehicle went off road and into culvert. *ak
01/04/20013
 Brakes failed resulting in three accidents and the emergency brake fails intermittently. nlm
11/22/2000
 While driving braking system malfunctioned, causing no braking ability, andresulting in a crash. no prior problems with braking system. please provide further information.*ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
06/12/2000404/01/2000
 When braking while making a sharp turn in either direction, brakes will vibrate violently and fail to stop the car. when reapplied the brakes operate as intended. has happened four times and i had the dealer look into problem when vehicle was in service for an unrelated problem. dealer reported that they found nothing wrong with the brakes. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
01/08/2000
 Vehicle experienced brake problems. replacement had to be made on both front calipers, and brake lines due to fluid leakage. also a loud rattling sound came from the wheels after repairs were made. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
05/20/20002505/20/2000
 Seat belt retractor on the driver's seat was not working properly. seat would lock up while consumer was driving, at times consumer could not wear the seat belt at all. contacted dealer. *ak the seat belt locks up and strangles consumer. consumer has a doctors note, so he doesn't have to wear the seat belt. this vehicle came equipped with a non working emergency brake that does not hold the vehicle. consumers vehicle needs new rotors. *jg
05/02/2001
 Excessive wear of front brake rotors. rotors had to be turned twice within nine months, 12,000 -19,000 miles. dealer notified. feel free to provide any further information.*ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
106/11/2000
 The rear driver side caliper mount and caliper pin rusted completely through and caused the brakes to lock up, the manufacturer failed to grease the caliper pin and mount when vehicle was first built.*jb
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
03/07/200219158107/05/2000
 There was a pin that snagged the brake lines and caused the brakes to fail. *jg
03/07/2002107/05/2000
 The tubing shown on the pictures are brake lines--the tubing was less than 1-inch up on the steel plate, it was snagged and torn apart--it was snagged ona piece of re-bar that holds a concrete guard in place, the lines for the brakes drained so fast the dual braking system did not work
01/08/2000
 Vehicle experienced brake problems. replacement had to be made on both front calipers, and brake lines due to fluid leakage. also a loud rattling sound came from the wheels after repairs were made. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
07/10/2001112/01/1999
 Master cylinder problems. was replaced/repaired by dealership and returned. brake still makes funny noise and is still mushy when applied. fuel injection has be repaired 4 going on 5 times now. engine makes a pinging/diesel sound when driven at constant rate of speed. sometimes at 30 mph, sometimes at highway speeds. sensors have been replaced, injectors have been replaced and still not fixed. at idle/stop car jumps forward without accelorator applied.
11/29/20001010/01/2000
 Car since new has had a multitude of failures to include the total failure of the parking brake, total evacuation of the master brake cylinder of fluid, brake go to the floor, clutch assembly vibrates to the point it is audable in the car and can be felt in the controls, rear end claunks, the body is miss alligned, engine misses at idle, these are all problems since new, ford has just looked at the car for the fifth time and has failed to respond to major safety items.
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
10/01/2000
 Because of the location of the heater outlet relative to the gas pedal, i am unable to easily switch between the accelerator and the brake pedal; particuraly in emergency, panic situations where it is necessary to move immediately from one pedal to the other. i have shoe size 13 0or 14. *ak
09/14/2000
 Consumer has rented on several occasions and everytime he experienced the same problem. gas pedal being too close to brake pedal, when consumer is braking foot is half way on the accelerator. *ak
07/23/2000705/01/2000
 Hand brake releases on its own without warning. parked car today on slight incline and exited car (engine not running), heard a loud bang (brake released) and car started to roll away. wife was in car and successfully got her leg over console and applied foot brake (hand brake would not engage).*ak
SERVICE BRAKES, HYDRAULIC - POWER ASSIST
04/01/2000
 Car died out while driving at 45mph, almost went off the road because power brakes went out. this is happening to a lot of 1999-2001 mustang gts and ford seems to not know how to fix it. *ak
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM
11/04/1999111/01/1999
 Power steering fluid leaking at brake booster fitting-booster assembly replaced. *ak