Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
91V134000FORD MOTOR COMPANY V (Vehicle)32500009/26/1991ODIFORD MOTOR COMPANY08/06/199108/07/1991
Defect SummaryFront disc brake rotors of the subject vehicles may experience severe corrosion if operated in areas where calcium chloride and sodium chloride are used extensively.
Consequence SummarySeverely corroded rotors may fracture or separate nearthe inner edges of the brake discs resulting in reduced braking effectiveness,higher than normal pedal efforts, loud grinding noises, and moderate pulls whenthe brakes are applied. reduced braking effectiveness may increase minimumstopping distances, possibly resulting in an accident.
Corrective SummaryReplace front brake rotors with full cast front brake rotors.
NotesSystem: brakes.vehicle description: passenger vehicles sold or registered in the following states: ct, il, in, me, ma, mi, nh, nj, ny, oh, pa, ri, vt, and wi.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, HYDRAULIC - ANTILOCK
9521210/01/199546478The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par04/25/1996
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
985A1303/18/1998601012The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc06/17/1998
956203/01/199539900Roughness concern during brake application. *tw11/01/1995
RCL/94E5503/01/19953013100Unknown11/01/1995

Investigations


NHTSA IDManufacturerDate openDate closeSubjectRecall campaign
SERVICE BRAKES, HYDRAULIC
EA90045FORD MOTOR COMPANY09/28/199009/12/1991BRAKE DISC HUB SEPARATIONS91V134001
 There is no summary currently available
EA90045FORD MOTOR COMPANY09/28/199009/12/1991BRAKE DISC HUB SEPARATIONS91V134002
 There is no summary currently available
EA90045FORD MOTOR COMPANY09/28/199009/12/1991BRAKE DISC HUB SEPARATIONS91V134000
 There is no summary currently available

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, HYDRAULIC
01/18/19891
 Having to many problems with tire, heating, brakes, suspension i change this parts like 3 times. *tr
SERVICE BRAKES, HYDRAULIC - ANTILOCK
08/12/1994109/23/1991
 Brakes squeal.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
05/15/20006
 Vehicle will stall suddenly without prior warning, usually stalls on highway. vehicle has been towed to dealer 6 times . dealer cannot not determine defect because by time vehicle arrives at dealers vehicle will restart.*ak the intake gasket was leaking and was replaced. the motor mount was replaced. all heater and coolant hoses were replaced. serpntine belt was cracked. front brake pads and rotors replaced. *yh
06/01/1997
 We have had this car repaired repeatedly for a lurching/jerking problem. motor mounts replaced, new clutch, new transmission, new brakes, new tires, it is still doing this. if the engine is shut off, sometimes you can get the car to temporarily stop the jerking. we are again, taking it in for repairs. have you any knowledge of this problem? it is a safety issue at this point. thank you.
06/16/1999101/01/1998
 Driving down street towards red light. attempted to apply brakes at normal braking distance, brakes seemed to have no affect, car continued to accelerate. applied brakes two more times. car continued to accelerate. impact occurred in intersection. final velocity approximately 60 mph. *ak
10/06/19973
 Brakes failed, 2 outer tie rods failed, outer axle boots failed.
1
 Brake recall work completed, however brakes continuously fail.
06/01/199701/01/1990
 While pulling into carport, hit brakes and vehicle accelerated out of control, resulting in a crash. also, brake failure. *ak
103/01/1990
 Brakes locked up.
03/17/19947
 Brakes failed.
01/01/19921
 Brakes failed. (first vehicle on 601413) *dh
08/01/19941
 Brakes failed. *sd
102/01/1990
 While driving, vehicle will shut down putting driver in jeopardy constantly. dealership unable to track. tt the brakes failed right after the vehicle was purchased. then the vehicle stalled out dangerously. now, the exterior paint was fading. *yh
02/03/19953
 Automatic brake release valve replaced.
02/08/19951
 Brakes did not stop vehicle. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
05/07/2001101/01/1989
 No summary listed for above vehicle. *ak
12/09/1998106/01/1989
 Disc separated from hub. this is the failure noted on recall 91v134. i was not informed of the recall due to missouri not being included in the states for that recall. the recall mentions corrosion due to salts which would certainly apply to the st. louis area. why would we not be included in the recall? it seems to me that ford bargained away our safty and nhtsa bought it. i believe that the area covered by this recall should be enlarged or not be limited at all. i've had this same failure with my 1989 sable. please note that the recall for subframe failure due to corrosion does include this area! *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
103/15/1989
 Calipers were made out of some sort of plastic which caused poor braking /excessive wear/warping of brake rotors. *sd
 Rear calipers locked up caused pads and rotors to wear to the point of no braking capability. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
10/16/19961
 Brake pads worn.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
09/05/2000101/01/1989
 Rotor separated from hub. *ak
01/18/19962
 Recall repair completed (91s36) replaced rotors, however front wheel brakes failed due to deep groove in rotor and frozen calipers (1st repair 12-2-92 at 14,595). mjs
09/08/1995
 Front brake rotors corroded prior to recall, recall repairs refused due to vin
09/08/199503/27/1989
 Front brake rotors corroded prior to recall, recall repairs refused due to vin (91v-134). *ak
06/22/1992
 Front brake rotors warped due to being too thin. in addition, motor mounts/automatic climate control module/engine head gasket/alternator/power steering hose/rear window defroster malfunctioned. *ak
07/02/199708/01/1989
 Making right turn lost left front braking ability . cause: center/left front brake rotor. result: stripped. *ak
606/22/1992
 Replaced front brake rotors; also replaced front motor mounts/head gaskets/power steering hose/automatic climate control module/alternator. *ak
05/26/1992106/28/1989
 Front wheel brake rotor replaced due to recall. (91s36)
10/01/1990103/15/1989
 Front brake rotors badly warped, causing brake failure/accident. *sd
02/06/1996
 Front disc rotors have severely corroded due to road salt. tt
05/29/19959
 Severely corroded rotor on right front fractured/separated from hub. *ak
06/08/19951
 Rotor on left front brake rusted through, separated from rotor hub, brake now disfunctional. tt
02/25/19951
 Right side rotor broke because of rust. tt
10/14/19941
 Brake rotor assembly fractured, vehicle pulled to side, resulting in extended stopping distance prior to recall, recall repairs refused (91v-134). *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
09/28/1996109/28/1996
 Rear brakes failed.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - DRUM
11/07/1994106/07/1989
 Rear brake drums replaced.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - WHEEL CYLINDERS
10/21/1994106/07/1989
 Rear brake cylinder replaced.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
07/17/20071500001
 This was on a 1989 ford taurus l . after rear brake repairs the brake line from the proportioning valve to the right rear brake hose sprung a leak and all braking was lost. due to the age of the vehicle this brake line likely broke due to years of corrosion from road salts and other sources during bad weather. due to so much possible damage from corrosion i have decided to junk the car. but it was likely that other ford taurus owners may have the same problem with serious consequences. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
10/19/1994206/07/1989
 Master cylinder replaced.