Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STEERING - GEAR BOX - SHAFT PITMAN | ||||||||||||||||
| 10V053000 | DAIMLER TRUCKS NORTH AMERICA | from 05/13/2009 to 01/26/2010 | V (Vehicle) | 220 | 04/02/2010 | MFR | DAIMLER TRUCKS NORTH AMERICA | 02/23/2010 | 02/23/2010 | |||||||
| Defect Summary | Daimler trucks is recalling certain model year 2010 freightliner cascadia vehicles manufactured may 20, 2009 through january 29, 2010 and equipped with optional sheppard hd94 steering gears. restraining washer locking tabs may not have been seated into the pitman arm retainer notches during assembly. | |||||||||||||||
| Consequence Summary | Incomplete installation of the pitman arm retaining mechanism may allow unthreading of the retainer. disengagement of the pitman arm from the steering box may result in loss of steering and crash could occur. | |||||||||||||||
| Corrective Summary | Dealers will inspect to insure pitman arm retainer is properly torqued and restraining washer is properly installed with locking tabs seated in notches of the retainer. this service will be performed free of charge. the safety recall is expected to begin on or before april 2, 2010. owners may contact daimler trucks at 1-800-547-0712. | |||||||||||||||
| Notes | Daimler trucks recall no. fl-572.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . | |||||||||||||||
| STEERING - RACK AND PINION | ||||||||||||||||
| 11V514000 | DAIMLER TRUCKS NORTH AMERICA | from 11/01/2004 to 06/15/2010 | V (Vehicle) | 9689 | 07/06/2012 | MFR | DAIMLER TRUCKS NORTH AMERICA | 10/13/2011 | 10/25/2011 | |||||||
| Defect Summary | Daimler trucks is recalling certain model year 2005-2011 freightliner cascadia, columbia, century, coronado, and classic xl trucks manufactured from november 1, 2004, through june 15, 2010 for the rack and pinion steering system. the lower pinion bearing may corrode and fail. a failed bearing may lead to damage of the spool valve seals. a damage spool valve seal may allow hydraulic fluid to flow to the right or left turn port instead of flowing to the return port. | |||||||||||||||
| Consequence Summary | The steering could unexpectedly turn left or right, making the vehicle more difficult to control and increasing the risk of a crash. | |||||||||||||||
| Corrective Summary | Daimler trucks will inspect the lower bearing for corrosion. if corrosion is found, the rack and pinion system will be replaced. if no corrosion is found, on the bearing, the bearing will be packed with grease and the rubber belows will be replaced with sealant added between the nellows and the rack housing. an interim letter was mailed in december 2011. owners may contact daimler trucks toll-free at 1-800-547-0712. | |||||||||||||||
| Notes | Daimler trucks' safety recall number is fl-614.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . | |||||||||||||||
| 09V357000 | DAIMLER TRUCKS NORTH AMERICA | from 10/29/2004 to 07/03/2009 | V (Vehicle) | 8882 | 02/05/2010 | ODI | DAIMLER TRUCKS NORTH AMERICA | 09/16/2009 | 09/16/2009 | |||||||
| Defect Summary | Daimler trucks is recalling certain model year 2005 through 2010 heavy duty trucks manufactured from october 29, 2005 through july 3, 2009. under certain condition, the left hand inner tie rod end may loosen over time and if not corrected, potentially separate from the steering rack. | |||||||||||||||
| Consequence Summary | A separated tie rod assembly can result in loss of vehicle control at higher speeds and a crash could occur. | |||||||||||||||
| Corrective Summary | Daimler trucks will notify owners and the vehicles will be repaired free of charge. the safety recall began on february 5, 2010. owners may contact daimler trucks toll-free at 1-800-547-0712. | |||||||||||||||
| Notes | Daimler trucks' recall campaign number fl-557.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . | |||||||||||||||
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| STEERING - COLUMN | |||||
| SB-46-50 | 09/01/2010 | 10037124 | Ready | 05/09/2011 | |
| SB-46-50 | 09/01/2010 | 10037124 | Freightliner: the procedure for replacing a failed thrust bearing in a steering column. *rm | 05/09/2011 | |
| STEERING - LINKAGES - TIE ROD ASSEMBLY | |||||
| SB-46-47 | 10/01/2009 | 10031824 | Freightliner truck: inner tie rod inspection and repair, rack and pinion gear. increased length of the driver side inner tie rod (if the inner tie rod unthreads from the rack) may cause abnormal steer tire wear due to high toe in or an in | 01/13/2010 | |
| STEERING - RACK AND PINION | |||||
| SB-46-52 | 11/01/2010 | 10036593 | Freightliner: input shaft seal replacement, rack and pinion steering gear. when replacing an input shaft seal on a rack and pinion steering gear, it is preferable to use replacement seal kit thy 607157a. no model years listed. *pe | 04/04/2011 | |
| SB-46-49 | 11/01/2010 | 10036592 | Freightliner: rack and pinion steering gear service procedures. until further notice, rack and pinion replacement assemblies a14-17666-000 and a14-17666-001 are no longer available from the dtna parts distribution centers. time frame for | 04/04/2011 | |
| SB-46-47 | 10/01/2009 | 10031824 | Freightliner truck: inner tie rod inspection and repair, rack and pinion gear. increased length of the driver side inner tie rod (if the inner tie rod unthreads from the rack) may cause abnormal steer tire wear due to high toe in or an in | 01/13/2010 | |
Investigations
| NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
|---|---|---|---|---|---|---|
| STEERING - RACK AND PINION | ||||||
| PE09040 | FREIGHTLINER LLC | 08/31/2009 | 11/19/2009 | RACK AND PINION FAILURE | 09V357000 | |
| A consumer complaint was filed with the agency on august 22, 2009, by an independent contractor leasing a 2009 freightliner cascadia.the complaint alleges that in april of 2009 at approximately 50,000 miles he experienced a seal rupture in the rack and pinion assembly.a new seal was installed and at 56,000 miles he found his right steer tire completely bald.the repair shop identified an internal failure of the rack and pinion assembly causing the rapid wear of the tire.odi has identified ewr field reports related to failed rack and pinions on the subject vehicles.the reports identify either an internal failure of the rack and pinion assembly that resulted in crashes or a looseness of the inner tie rod end of the rack and pinion resulting in a poor alignment and premature tire wear.information received during this investigation from freightliner detailed failures of the rack and pinion assemblies on the subject vehicles.these failures were the result of the left hand inner tie rod end becoming loose over time.when the tie rod becomes loose, it may separate from the rack and pinion assembly and make the vehicle difficult to steer.frieghtliner has concluded that a defect related to motor vehicle safety does exist on the subject vehicles and has initiated a safety recall (09v-357) that will remedy all of them.this recall involves removing the tie rod and adding a compound to it that will prevent the tie rod from coming loose over time.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed. | ||||||
| PE09040 | DAIMLER TRUCKS NORTH AMERICA | 08/31/2009 | 11/19/2009 | RACK AND PINION FAILURE | 09V357000 | |
| A consumer complaint was filed with the agency on august 22, 2009, by an independent contractor leasing a 2009 freightliner cascadia.the complaint alleges that in april of 2009 at approximately 50,000 miles he experienced a seal rupture in the rack and pinion assembly.a new seal was installed and at 56,000 miles he found his right steer tire completely bald.the repair shop identified an internal failure of the rack and pinion assembly causing the rapid wear of the tire.odi has identified ewr field reports related to failed rack and pinions on the subject vehicles.the reports identify either an internal failure of the rack and pinion assembly that resulted in crashes or a looseness of the inner tie rod end of the rack and pinion resulting in a poor alignment and premature tire wear.information received during this investigation from freightliner detailed failures of the rack and pinion assemblies on the subject vehicles.these failures were the result of the left hand inner tie rod end becoming loose over time.when the tie rod becomes loose, it may separate from the rack and pinion assembly and make the vehicle difficult to steer.frieghtliner has concluded that a defect related to motor vehicle safety does exist on the subject vehicles and has initiated a safety recall (09v-357) that will remedy all of them.this recall involves removing the tie rod and adding a compound to it that will prevent the tie rod from coming loose over time.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed. | ||||||
| STEERING - RACK AND PINION - PINION SHAFT | ||||||
| PE09040 | FREIGHTLINER LLC | 08/31/2009 | 11/19/2009 | RACK AND PINION FAILURE | 09V357000 | |
| A consumer complaint was filed with the agency on august 22, 2009, by an independent contractor leasing a 2009 freightliner cascadia.the complaint alleges that in april of 2009 at approximately 50,000 miles he experienced a seal rupture in the rack and pinion assembly.a new seal was installed and at 56,000 miles he found his right steer tire completely bald.the repair shop identified an internal failure of the rack and pinion assembly causing the rapid wear of the tire.odi has identified ewr field reports related to failed rack and pinions on the subject vehicles.the reports identify either an internal failure of the rack and pinion assembly that resulted in crashes or a looseness of the inner tie rod end of the rack and pinion resulting in a poor alignment and premature tire wear.information received during this investigation from freightliner detailed failures of the rack and pinion assemblies on the subject vehicles.these failures were the result of the left hand inner tie rod end becoming loose over time.when the tie rod becomes loose, it may separate from the rack and pinion assembly and make the vehicle difficult to steer.frieghtliner has concluded that a defect related to motor vehicle safety does exist on the subject vehicles and has initiated a safety recall (09v-357) that will remedy all of them.this recall involves removing the tie rod and adding a compound to it that will prevent the tie rod from coming loose over time.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed. | ||||||
| PE09040 | DAIMLER TRUCKS NORTH AMERICA | 08/31/2009 | 11/19/2009 | RACK AND PINION FAILURE | 09V357000 | |
| A consumer complaint was filed with the agency on august 22, 2009, by an independent contractor leasing a 2009 freightliner cascadia.the complaint alleges that in april of 2009 at approximately 50,000 miles he experienced a seal rupture in the rack and pinion assembly.a new seal was installed and at 56,000 miles he found his right steer tire completely bald.the repair shop identified an internal failure of the rack and pinion assembly causing the rapid wear of the tire.odi has identified ewr field reports related to failed rack and pinions on the subject vehicles.the reports identify either an internal failure of the rack and pinion assembly that resulted in crashes or a looseness of the inner tie rod end of the rack and pinion resulting in a poor alignment and premature tire wear.information received during this investigation from freightliner detailed failures of the rack and pinion assemblies on the subject vehicles.these failures were the result of the left hand inner tie rod end becoming loose over time.when the tie rod becomes loose, it may separate from the rack and pinion assembly and make the vehicle difficult to steer.frieghtliner has concluded that a defect related to motor vehicle safety does exist on the subject vehicles and has initiated a safety recall (09v-357) that will remedy all of them.this recall involves removing the tie rod and adding a compound to it that will prevent the tie rod from coming loose over time.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed. | ||||||
| STEERING - RACK AND PINION - RACK | ||||||
| PE09040 | FREIGHTLINER LLC | 08/31/2009 | 11/19/2009 | RACK AND PINION FAILURE | 09V357000 | |
| A consumer complaint was filed with the agency on august 22, 2009, by an independent contractor leasing a 2009 freightliner cascadia.the complaint alleges that in april of 2009 at approximately 50,000 miles he experienced a seal rupture in the rack and pinion assembly.a new seal was installed and at 56,000 miles he found his right steer tire completely bald.the repair shop identified an internal failure of the rack and pinion assembly causing the rapid wear of the tire.odi has identified ewr field reports related to failed rack and pinions on the subject vehicles.the reports identify either an internal failure of the rack and pinion assembly that resulted in crashes or a looseness of the inner tie rod end of the rack and pinion resulting in a poor alignment and premature tire wear.information received during this investigation from freightliner detailed failures of the rack and pinion assemblies on the subject vehicles.these failures were the result of the left hand inner tie rod end becoming loose over time.when the tie rod becomes loose, it may separate from the rack and pinion assembly and make the vehicle difficult to steer.frieghtliner has concluded that a defect related to motor vehicle safety does exist on the subject vehicles and has initiated a safety recall (09v-357) that will remedy all of them.this recall involves removing the tie rod and adding a compound to it that will prevent the tie rod from coming loose over time.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed. | ||||||
| PE09040 | DAIMLER TRUCKS NORTH AMERICA | 08/31/2009 | 11/19/2009 | RACK AND PINION FAILURE | 09V357000 | |
| A consumer complaint was filed with the agency on august 22, 2009, by an independent contractor leasing a 2009 freightliner cascadia.the complaint alleges that in april of 2009 at approximately 50,000 miles he experienced a seal rupture in the rack and pinion assembly.a new seal was installed and at 56,000 miles he found his right steer tire completely bald.the repair shop identified an internal failure of the rack and pinion assembly causing the rapid wear of the tire.odi has identified ewr field reports related to failed rack and pinions on the subject vehicles.the reports identify either an internal failure of the rack and pinion assembly that resulted in crashes or a looseness of the inner tie rod end of the rack and pinion resulting in a poor alignment and premature tire wear.information received during this investigation from freightliner detailed failures of the rack and pinion assemblies on the subject vehicles.these failures were the result of the left hand inner tie rod end becoming loose over time.when the tie rod becomes loose, it may separate from the rack and pinion assembly and make the vehicle difficult to steer.frieghtliner has concluded that a defect related to motor vehicle safety does exist on the subject vehicles and has initiated a safety recall (09v-357) that will remedy all of them.this recall involves removing the tie rod and adding a compound to it that will prevent the tie rod from coming loose over time.a copy of the recall is attached.freightliner's action resolves the issues raised by this investigation and, therefore, this investigation is closed. | ||||||
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| STEERING | |||
| 08/17/2011 | 170333 | ||
| Tl-the contact owns a 2010 freightliner cascadia. the vehicle was taken to an independent mechanic who detected that the rack and pinion steering was faulty. the vehicle was repaired. the manufacturer was not notified of the problem. the failure mileage was 170,333. kmj | |||
| 08/17/2011 | 170333 | ||
| Tl-the contact owns a 2010 freightliner cascadia. the vehicle was taken to an independent mechanic who detected the rack and pinion steering was faulty which was a common failure. the vehicle was repaired. the manufacturer was not notified of the problem. the failure mileage was 170,333. js | |||