Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
POWER TRAIN | |||||
0168 | 11/01/2002 | 10000595 | Replacing neutral-safety and backup switches. *tt | 03/25/2003 | |
2630 | 09/01/2002 | 2630 | 10000143 | Meritor electric over air (eoa) range shift system troubleshooting information. *tt | 02/13/2003 |
4108 | 07/01/2000 | 614496 | Vehicles with certain speed sensors may exhibit a speedometer jumping or erratic range shifting; unwanted engagement of the power take-off (pto) and / or vehicle start-up and optimized idle. *tt | 10/24/2000 | |
5483 | 07/01/1998 | 609781 | Voltmeter accuracy test. yd | 04/10/2000 | |
POWER TRAIN - AUTOMATIC TRANSMISSION | |||||
98269 | 06/01/1998 | 602384 | Some hayden industrial products transmission oil coolers may prematurely fail. *yc | 11/03/1998 | |
POWER TRAIN - AUTOMATIC TRANSMISSION - CONTROL MODULE (TCM, PCM) | |||||
54130 | 12/01/2000 | 616486 | Complaints regarding the performance of eaton autoshift automated transmission may be caused by autoshift component and / or software issues, freightliner circuitry issues or a need for better driver education. this bulletin will outline | 03/01/2001 | |
POWER TRAIN - AUTOMATIC TRANSMISSION - COOLING UNIT AND LINES | |||||
2624 | 01/01/2001 | 622344 | General information stating that the hayden air-to-oil transmission ccolers are secured to a mounting bracket via bolts through rubber blocks. some coolers may have a tube-to-header dimension that is too large, and could result in the coo | 10/16/2001 | |
2624 | 01/01/2001 | 620053 | This bulletin states that the hayden air-to-oil transmission coolers are secured to a mounting bracket via bolts through rubber blocks. when the bolts are torqued, the rubber blocks deform to hold the cooler in place. some coolers may h | 07/10/2001 | |
267 | 04/01/1997 | 52365 | Transmission fluid cooler mounting. *tw | 07/24/1997 | |
POWER TRAIN - AXLE ASSEMBLY | |||||
3519 | 01/01/2003 | 3519 | 10000890 | Carrier-to-housing leaks, dana spicer d/r404 series axles. *tt | 04/02/2003 |
4110 | 09/01/2002 | 10000146 | New meritor mid-ship bearing hanger available. *tt | 02/13/2003 | |
3519 | 06/01/2002 | 635326 | General information on carrier-to-housing leaks on dana spicer d/r404 series axles. *tt | 10/21/2002 | |
3233 | 01/01/2001 | 620047 | Some vehicles may have been incorrectly shimmed at the factory, and may lean slightly to the right or left. this service bulletin involves replacing the front axle spacer. *tt | 07/10/2001 | |
3319 | 10/01/2000 | 619075 | Front and drive axle alignment specifications revised for consistency with the maintenance council (tmc) recommended practice rp642 (duplicate of bulletin # 35-17). *tt | 05/14/2001 | |
3517 | 10/01/2000 | 619073 | Front and drive axle alignment specifications revised for consistency with the maintenance council (tmc) recommended practice rp642. *tt | 05/14/2001 | |
3516 | 08/01/2000 | 614455 | General information regarding torque reduction for axilok and pro-torq spindle nuts. *tt | 10/17/2000 | |
3320 | 08/01/2000 | 614454 | Subject regarding torque reduction for axilok and pro-torq spindle nuts. *tt | 10/17/2000 | |
3225 | 02/01/1999 | 604672 | Information pertaining to front axle clamp assembly difficulties. *tt | 05/07/1999 | |
POWER TRAIN - AXLE HUBS | |||||
3320 | 10/01/2000 | 3320 | 619074 | General information on new torque specifications for axilok and pro-torq spindle nuts when used with conmet drive axle hubs with preset bearings. *tt | 05/14/2001 |
SF195AB | 11/01/1999 | 612129 | Vehicles equipped with conmet preset greased hubs are being retrofitted with conmet oil filled hubs at the customers request. *tt | 06/06/2000 | |
POWER TRAIN - CLUTCH ASSEMBLY - PEDAL/LINKAGE | |||||
2532 | 03/01/2002 | 635311 | This service bulletin applies to new lube-free clutch cross-shaft bushings. *tt | 10/21/2002 | |
2529 | 06/01/2001 | 622367 | Subject regarding eaton's design change to the clutch cross-shaft bushings. the new bushings are lubrication- and maintenance-free. they require nickel-plated cross-shafts in order to prevent corrosion. vehicles built from april 13, 2 | 10/17/2001 | |
2528 | 04/01/2001 | 620321 | Information stating that the end of the long (driver's side) clutch-release cross-shaft may wear prematurely. the existing clutch release levers may have a gap insufficient to ensure positive clamping to the cross-shaft. *t | 08/02/2001 | |
2525 | 07/01/2004 | 2525 | 605948 | Customers may complain of clutch linkage rattle. *tt to also include freightliner columbia and coronado models. *tt | 08/02/1999 |
POWER TRAIN - MANUAL TRANSMISSION | |||||
2637 | 09/01/2002 | 10000144 | Shift bar housing removal. *tt | 02/13/2003 | |
2623 | 11/01/2005 | 2623 | 635317 | Freightliner smartshift troubleshooting. freightliner. *tt | 10/21/2002 |
2630 | 02/01/2002 | 632381 | Subject regarding meritor eoa range shift system troubleshooting information. *tt | 07/15/2002 | |
2631 | 02/01/2002 | 631366 | Subject regarding all generation ll autoshift transmissions programmed at the manufacturing plant received the default shift point calibration for that model transmission. *yh | 05/23/2002 | |
2532 | 03/01/2002 | 631359 | Information regarding lube free bushing replacement. *yh | 05/23/2002 |