Freightliner Sterling Acterra
Model Sterling Acterra made by Freightliner got 3 investigations as well as 1 recall. The car had some investigations: suspension and wheels. There was one recall concerning wheels .
Model 2005
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
WHEELS | ||||||||||||||||
05V185000 | FREIGHTLINER LLC | from 02/20/2005 to 03/20/2005 | V (Vehicle) | 3500 | 10/21/2005 | MFR | FREIGHTLINER LLC | 04/27/2005 | 04/29/2005 | |||||||
Defect Summary | On certain heavy duty class 8 trucks equipped with accuride aluminum wheels, the wheels were not properly pre-stressed. this allows cracks to develop over time. | |||||||||||||||
Consequence Summary | This may eventually lead to wheel failure and possibly result in a vehicle crash. | |||||||||||||||
Corrective Summary | Dealers will replace the wheels free of charge. the recall began on october 21, 2005. owners may contact freightliner at 1-800-547-0712. | |||||||||||||||
Notes | Freightliner recall no. fl-448.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. |
Investigations
NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
---|---|---|---|---|---|---|
SUSPENSION - FRONT - HUB | ||||||
RQ07003 | FREIGHTLINER LLC | 12/05/2007 | 03/26/2008 | FRONT WHEEL SEPARATION | 08V137000 | |
Odi is closing this investigation based on daimler truck north america 's (dtna) march 19, 2008, defect notification report which outlines dtna's intention to campaign 28,764 freightliner, sterling, and freightliner custom chassis vehicles [equipped with either arvinmeritor or axle alliance company 6,000 - 8,000 pound rated front axle assemblies utilizing a four piece spindle nut set] manufactured between january 26, 2000, and march 24, 2008.dtna has proposed providing a remedy for the currently installed four piece spindle nut systems which may lead to incorrect end play, [bearing] cone spin, excessive heat, degradation of lubrication, wear of the spindle nut [backface] and bearing journal, oil contamination with metal shavings, and premature bearing failure.continued operation may lead to a wheel separation.odi has relieved dtna of the responsibility to provide the information requested as part of this rq so that dtna could focus their efforts on investigation of the wheel separation issues and planning and implementing a responsive and timely field action (campaign). | ||||||
SUSPENSION - FRONT - WHEEL BEARING | ||||||
RQ07003 | FREIGHTLINER LLC | 12/05/2007 | 03/26/2008 | FRONT WHEEL SEPARATION | 08V137000 | |
Odi is closing this investigation based on daimler truck north america 's (dtna) march 19, 2008, defect notification report which outlines dtna's intention to campaign 28,764 freightliner, sterling, and freightliner custom chassis vehicles [equipped with either arvinmeritor or axle alliance company 6,000 - 8,000 pound rated front axle assemblies utilizing a four piece spindle nut set] manufactured between january 26, 2000, and march 24, 2008.dtna has proposed providing a remedy for the currently installed four piece spindle nut systems which may lead to incorrect end play, [bearing] cone spin, excessive heat, degradation of lubrication, wear of the spindle nut [backface] and bearing journal, oil contamination with metal shavings, and premature bearing failure.continued operation may lead to a wheel separation.odi has relieved dtna of the responsibility to provide the information requested as part of this rq so that dtna could focus their efforts on investigation of the wheel separation issues and planning and implementing a responsive and timely field action (campaign). | ||||||
WHEELS - CAP/COVER/HUB | ||||||
RQ07003 | FREIGHTLINER LLC | 12/05/2007 | 03/26/2008 | FRONT WHEEL SEPARATION | 08V137000 | |
Odi is closing this investigation based on daimler truck north america 's (dtna) march 19, 2008, defect notification report which outlines dtna's intention to campaign 28,764 freightliner, sterling, and freightliner custom chassis vehicles [equipped with either arvinmeritor or axle alliance company 6,000 - 8,000 pound rated front axle assemblies utilizing a four piece spindle nut set] manufactured between january 26, 2000, and march 24, 2008.dtna has proposed providing a remedy for the currently installed four piece spindle nut systems which may lead to incorrect end play, [bearing] cone spin, excessive heat, degradation of lubrication, wear of the spindle nut [backface] and bearing journal, oil contamination with metal shavings, and premature bearing failure.continued operation may lead to a wheel separation.odi has relieved dtna of the responsibility to provide the information requested as part of this rq so that dtna could focus their efforts on investigation of the wheel separation issues and planning and implementing a responsive and timely field action (campaign). |