Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| SERVICE BRAKES, AIR - ANTILOCK - CONTROL UNIT/MODULE | |||||
| 4056 | 07/01/2008 | 4056C | 10022691 | Gmc: unable to communicate with the ebcm dtc u0121. *nj vehicles equipped with jl4. updated 9/30/08. *pe | 09/20/2007 |
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| SERVICE BRAKES, HYDRAULIC | |||
| 12/20/2010 | 33148 | ||
| Brake rotors warped at 15k miles, had them turned under warranty at dealer vehicle was purchased from. at 30k miles rotors warped again, this time 1 brake pad was worn down to 2mm thick, the rest appear almost new in thickness. dealer turned rotors again and replaced pads for $200. requested and was denied that the brake work be covered under warranty by dealer and gm cs. i took old brake hardware home with me and still have it. i contend there is something wrong with the design or materials in the brake system of this truck causing premature wear and failure of non warranty brake items such as the pads and rotors. i contend that there has been a hanging brake pad causing the rotors to overheat and warp since the vehicle was new and any work performed at the time of the 15k mile rotor turning did not correct the problem. if brake work needs to be performed on this truck every 15k miles there is a reason that should be covered under warranty. one time freak failure i can see, two times evenly spaced at 15k mile intervals and i think something is wrong with the vehicles brakes design and/or materials. vehicle is daily driver, 15 miles a day to and from work. garaged during the winter, taken off road (frozen cornfields, dirt field roads) for a week in late fall. used to tow a fishing boat a few times a year. owner is a former ase certified mechanic and is not an aggresive user of the brakes. meaning i brake firmly and evenly when braking is needed, lifting my foot off the pedal once stopped and apply only enough pressure to hold vehicle still. | |||
| 02/05/2010 | 24000 | 4 | |
| 09/2009 | |||
| 11/11/2008 | 25474 | 8 | |
| 2008 gmc sierra crew cab. the vehicle is 18 months old, has been to dealership 8 times to replace or repair front and rear brakes. problem still exist and dealership doesn't know how to fix problem. at highway speeds, when brakes are applied, major vibration occurs and vehicle is hard to hold on the road. problem stared at 25,474 miles and vehicle now has 53,000 miles. *tr | |||
| 12/11/2008 | 26832 | 1 | |
| Brake problems.*tr | |||
| 09/01/2008 | 21 | ||
| Tl*the contact owns a 2008 gmc sierra 1500. while driving 30 mph, the contact rear ended another vehicle due to faulty brakes. a police report was filed. the dealer was notified and stated that they were not aware of the failure. the contact found out that the brakes were faulty from the mechanic. the dealer wants the contact to pay for the repair, although the vehicle had faulty brakes at the time of purchase. the current mileage was 850 and failure mileage was 21. | |||
| 06/06/2008 | 9950 | 1 | |
| I have purchased a new 2008 gmc sierra 1500 pickup on march 1 2008 and currently has 10, 400 miles on the vehicle. i have pouncing and vibrating brakes and had them checked at a gm dealer in my town, the brake rotor have measurements of 1.17 and 1.16 left, it is recommended that rotors be replaced at a measurement of 1.1. vehicle iis not safe to operate with rotors in this condition and have to be manufactures defect to be in this condition already. the vehicle as at a registered gm dealership in ligonier pa but this dealer is a buick and pontiac dealer and does not sell gmc trucks. gmc will not honor the warranty at this location and this results in my operating a vehicle that is not safe. this is a combination of gm arrogance in policy and the installment of inferior brake rotors to begin with. *tr | |||