Grumman Kurbmaster 1983
Model Kurbmaster made in 1983 by Grumman got 3 recalls. There were some recalls concerningfuel system, gasoline, service brakes, hydraulic and trailer hitches.
Model 1983
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FUEL SYSTEM, GASOLINE - DELIVERY - HOSES, LINES/PIPING, AND FITTINGS | ||||||||||||||||
| 87V036000 | GRUMMAN OLSON, INC | from 01/01/1983 to 01/01/1986 | V (Vehicle) | 1806 | 04/09/1987 | MFR | GRUMMAN CORP. | 03/16/1987 | 03/30/1987 | |||||||
| Defect Summary | Clamp which secures the fuel filler hose to the body is missing. | |||||||||||||||
| Consequence Summary | Hose could sag onto rear spring wearing a hole in thehose; this could allow fuel to spill onto ground while filling or drivingtruck. | |||||||||||||||
| Corrective Summary | Install missing clamp and replace filler hose if it has been rubbed by spring. | |||||||||||||||
| Notes | System: fuel filler hose.vehicle description: truck bodies mounted on ford e 350 chassis. | |||||||||||||||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS | ||||||||||||||||
| 85V147000 | GRUMMAN ALLIED IND., INC. | from 07/01/1982 to 05/01/1985 | V (Vehicle) | 67 | 01/07/1986 | MFR | GRUMMAN CORP. | 11/13/1985 | 12/02/1985 | |||||||
| Defect Summary | The routing of brake lines brought the line close to an area used to fasten the seat socket support structure to the chassis. the fastening of seat support is done with bolts and when the bolts are tightened the free end of the bolts pinches one of the brake lines against the chassis frame rail. this causes a reduction in the brake line which reduces the volume of fluid passing through the line. consequence of defect: the reduced volume of fluid affects the efficiency of the brake system. also the brake line may crack causing loss of fluid line . in either case, a longer stopping distance would be required when maximum brake efficiency is needed. operation of a vehicle with damaged brakes could lead to a vehicle crash. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | Inspect and replace the affected brake line with a new part. | |||||||||||||||
| Notes | System: brake line. vehicle description: kurbmaster body built on a ford ln 700 chassis. | |||||||||||||||
| TRAILER HITCHES - FIFTH WHEEL ASSEMBLY | ||||||||||||||||
| 85V167000 | GRUMMAN ALLIED IND., INC. | from 03/01/1983 to 08/01/1983 | V (Vehicle) | 218 | 12/16/1985 | MFR | GRUMMAN CORP. | 12/20/1985 | 01/10/1986 | |||||||
| Defect Summary | The reinforcing plates were omitted from the trailer pin box assembly, which is used to hold the fifth wheel assembly to the trailer. consequence of defect: a fatique failure off the pin box allow the fifth wheel assembly to separate from the trailer. therefore, the trailer will fall off the towing truck and roll uncontrolled on the roadway. this may cause an accident. | |||||||||||||||
| Consequence Summary | ||||||||||||||||
| Corrective Summary | Replace the pin box assembly if reinforcement plates are missing. | |||||||||||||||
| Notes | System:reinforcement plates, fifth wheel. vehicle description:fifth wheel trailers designed to be pulled behind a fordf series pickup truck. | |||||||||||||||