Harley Davidson Flstf 2005
Model Flstf made in 2005 by Harley Davidson got 2 consumer complains as well as 1 recall. Consumer complaints with reference, among others things, to other and wheels. There was one recall concerning equipment .
Model 2005
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EQUIPMENT - OTHER - LABELS | ||||||||||||||||
| 05V151000 | HARLEY-DAVIDSON MOTOR COMPANY | from 10/11/2004 to 05/02/2005 | V (Vehicle) | 167628 | 06/06/2005 | MFR | HARLEY-DAVIDSON MOTOR COMPANY | 04/14/2005 | 04/15/2005 | 567 | ||||||
| Defect Summary | Certain softail motorcycles fail to comply with the requirements of part 567, 'certification.' the vin/certification label contains incorrect tire size and inflation pressures for the front wheel. the label states the tire size is mt90b21 and the inflation pressure as 30 psi, whereas the correct tire size is mt90b16, and the correct inflation pressure is 36 psi. | |||||||||||||||
| Consequence Summary | The certification label is incorrect giving improper information. | |||||||||||||||
| Corrective Summary | Harley- davidson will mail instructions along with corrected federal certification label. if an owner so desires, a dealer can install the label for them. the recall began on june 6, 2005. owners may contact harley-davidson at 1-414-343-4056. | |||||||||||||||
| Notes | Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. | |||||||||||||||
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| OTHER | |||
| 08/20/2006 | 4711 | 1 | 06/18/2005 |
| While me and my wife was riding our fatboys (her 2005 & mine 2004) we were on our first day of a 8 day road trip traveling on route 84 west near carmel ny, she developed a problem. all 5 of her chrome pulley bolts sheared off harley davidson p/n 94773-00a. got my boys to trailer her home. next day bought new hd wheel and parts to but the bike on the road. before bring the parts to my dealer i wanted to see if the original factory bolts fit the same as the chrome (94773-00a) did. i clean the yellow locktight off of the original bolt and without the pulley in place i hand-tighten the bolt . did the same with the 94773-00a bolt. they fit different. the original bolts fit with a slight movement when moving the bolt left to right. the 94773-00a bolt had a much more noticeable movement. showed my dealership and i am waiting for a reply from harley davidson. if you perform this test on your wheel make sure the bolt and the threads in the wheel are totally free of locktight. before i installed the 94773-00a bolts i purchased the softail service manual and a new torque wrench and red 262 locktight, i followed every step in the hd manual. *nm | |||
| WHEELS - LUGS/NUTS/BOLTS | |||
| 08/20/2006 | 4711 | 1 | 06/18/2005 |
| While me and my wife was riding our fatboys (her 2005 & mine 2004) we were on our first day of a 8 day road trip traveling on route 84 west near carmel ny, she developed a problem. all 5 of her chrome pulley bolts sheared off harley davidson p/n 94773-00a. got my boys to trailer her home. next day bought new hd wheel and parts to but the bike on the road. before bring the parts to my dealer i wanted to see if the original factory bolts fit the same as the chrome (94773-00a) did. i clean the yellow locktight off of the original bolt and without the pulley in place i hand-tighten the bolt . did the same with the 94773-00a bolt. they fit different. the original bolts fit with a slight movement when moving the bolt left to right. the 94773-00a bolt had a much more noticeable movement. showed my dealership and i am waiting for a reply from harley davidson. if you perform this test on your wheel make sure the bolt and the threads in the wheel are totally free of locktight. before i installed the 94773-00a bolts i purchased the softail service manual and a new torque wrench and red 262 locktight, i followed every step in the hd manual. *nm | |||
Car dealers selling
| State | City | Zip | Name | Phone |
|---|---|---|---|---|
| MA | NORTH ATTLEBORO | 02760 | PRECISION | 401-724-0010 |