Harley Davidson Harley Davidson 1998

Model Harley Davidson made in 1998 by Harley Davidson got 9 consumer complains as well as 23 service bulletins. Consumer complaints with reference, among others things, to electrical system and engine and engine cooling. Technical service bulletines regarding electrical system and engine and engine cooling.

Model 1998

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ELECTRICAL SYSTEM
#4808/01/1998603411Short tip on short circuits. *yc02/19/1999
#4808/01/1998603413More on diagnostics. *yc02/19/1999
#4808/01/1998603405Information regarding s.e. programming module. *yc02/19/1999
ELECTRICAL SYSTEM - BATTERY
#4808/01/1998603404Brief information regarding battery chargers. *yc02/19/1999
#4808/01/1998603401Brief information concerning sealed batteries. *yc02/19/1999
ELECTRICAL SYSTEM - IGNITION - SWITCH
#4808/01/1998603409Brief information on 091 recall. *yc02/19/1999
#4808/01/1998603403Conditions with the tank mounted ignition switch. *yc02/19/1999
ENGINE AND ENGINE COOLING - ENGINE
#4808/01/1998603417Subject regarding fastener change. *yc02/19/1999
#4808/01/1998603408Crankcase information. *yc02/19/1999
#4808/01/1998603407Brief information regarding the rocker box head gaskets. *yc02/19/1999
M-1073A10/12/1998603271Experiencing excessive rattle associated with some tour - pak lid gasket modification. *yc02/16/1999
POWER TRAIN - AUTOMATIC TRANSMISSION
#4808/01/1998603406Procedures regarding twin transmission covers. *yc02/19/1999
POWER TRAIN - CLUTCH ASSEMBLY
#4808/01/1998603410Concerns with starter clutch failure. *yc02/19/1999
SEAT BELTS
98022398022302/23/1998602490Information and procedures on road zeppelin seats and backrests. *yc11/05/1998
SEATS - FRONT ASSEMBLY - POWER ADJUST
W-12507/15/1998603396Provided information on warranty information on seats with rider backrest. *yc02/19/1999
STRUCTURE
PM10502/24/1998600139Air spring guard installation. *yc04/27/1998
STRUCTURE - BODY
#4808/01/1998603428Technical tips from the field. *yc02/22/1999
#4808/01/1998603419A quantity of saddlebag hinges produced by the supplier were improperly found. *yc02/19/1999
#4808/01/1998603412Subject regarding historic code 56. *yc02/19/1999
#4808/01/1998603416Some vehicles experiencing front end squeak.02/19/1999
#4808/01/1998603418Extra parts. *yc02/19/1999
TIRES
M106809/26/1997600143Information on tire and rim identification. *yc04/27/1998
VEHICLE SPEED CONTROL
#4808/01/1998603414Information pertaining to cruise control kits. *yc02/19/1999

Consumer Complaints


Fail datemilesoccurencesPurchase date
ELECTRICAL SYSTEM - IGNITION - SWITCH
1
 Ignition module (32969-98) installation design caused failure of module and coil. yh
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
1
 Motorcycle engine is designed with powder coating, which could cause premature abrasion to engine. yh
EXTERIOR LIGHTING - HEADLIGHTS
03/10/1998102/06/1998
 Headlights aim down while high beams are on and driver can't see.
POWER TRAIN
05/01/19981
 Speedometer failed, unable to get replacement parts due to back order.
POWER TRAIN - MANUAL TRANSMISSION
10/01/19972009/01/1997
 Since purchasing the motorcycle in september of 1997 i have experienced repeated failures when shifting into forth gear, it will act as if it goes into a false neutral. i've had motorcycle to the dealership at least seven times for the same problem since it's original purchase, and in all cases even with a harley representative checking the transmission were unable to corect the problem. the dealership and harley have told me they would do nothing more unless the transmisstion suffered a major failure, i'm still having shifting problems, missing forth gear, and even have an active extended warranty which harley will not honor. i will be happy to send you my letter to harley and their responce to me if needed, please help, thank you. *ak
SEATS - MOTORCYCLE
1
 Back rest failed. mjs
STRUCTURE - BODY - BUMPERS
05/02/1998
 While driving the motorcycle the back fender which is attached to the frame broke, causing the fender to cut into the tire. driver was able to exit off freeway safely. this incident could have caused a blowout of the tire. the motorcycle has been sent back to the manufacturer. model name, big dog pit bull. *ak
SUSPENSION - FRONT
06/10/2000108/01/1997
 The front wheel bearings of this vehicle froze up at 75 mph. this caused the bike to come to an abrupt and shudering stop. if the road had been wet i am quite sure the front tire would have slid out from under me causing injury or death to myself or others. although i missed servicing these bearings at the prescribed 10,000 mile interval , i do not think they should be so fragile as to self destruct at 18,000 miles. in fact new models have a different sealed bearing. i called and wrote to harley-davidson suggesting a warning or recall because i seriously believe someone may get killed because of these bearings. also a major expense was incurred replacing not only the bearings, but axle, lower front fork legs, speedometer drive housing, cable, seals, etc. i would like to stress this is a very dangerous part that could easily be upgraded before someone gets killed. harley-davidson blamed me for not servicing the bearings on time. they may have failed even if the servicing took place.
TIRES
08/01/1997
 Severe front tire instability develops when tire is run at speeed of 70 mph on warm days, numerous motorcycle riders have experienced high speed falls with this new dunlop tire. severe injuries and possibly deaths are occuring.( dot number: tire size: mt90b16 )