Harley Davidson Screamin Eagle
Model Screamin Eagle made by Harley Davidson got 1 recall as well as 6 service bulletins. Technical service bulletines regarding engine and engine cooling and equipment. There was one recall concerning service brakes, hydraulic .
Model 9999
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SERVICE BRAKES, HYDRAULIC | ||||||||||||||||
99E004000 | HARLEY-DAVIDSON MOTOR CO. | E (Equipment) | 1831 | 03/15/1999 | MFR | HARLEY-DAVIDSON MOTOR COMPANY | 02/22/1999 | 02/25/1999 | ||||||||
Defect Summary | Equipment description: part nos. 66693-98 and 66680-98 are used on 1984-1999 fxr motorcycles (equipped with mid-vehicle rear brake controls and 1991-1998 fxd motorcycles (equipped with mid-vehicle rear brake controls). on these motorcycles, the rear brake pedal can come in contact with the brace supports. part nos. 66686-98 and 66704-98 are used on 1984-1999 fxst motorcycles (with forward or custom brake controls). on these motorcycles, the instruction sheet for these supports lacks information regarding the proper routing of the rear brake reservoir hose. | |||||||||||||||
Consequence Summary | The rear brake pedal can come in contact with the brace supports limiting the travel of the rear brake pedal. this could cause a reduction in or loss of brake performance. also, the instruction sheet for these supports lacks information regarding the proper routing of the rear brake reservoir hose, resulting in a pinched rear brake reservoir hose. this improper routing could cause rear brake drag, leading to rear wheel lockup. | |||||||||||||||
Corrective Summary | Dealers will remove the race brace support on the fxr and fxd motorcycles. on fxst motorcycles, dealers will inspect the rear brake reservoir hose for proper routing and replace, if required. | |||||||||||||||
Notes | Owner notification began march 15, 1999. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact harley-davidson at 1-414-342-4680. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
ENGINE AND ENGINE COOLING - ENGINE | |||||
1134 | 03/31/2003 | 10002248 | 2003 screamin' eagle flhrsei2 model motorcycles may be experiencing low power levels. harley-davidson has elected to upgrade the ecm (engine control module) calibration of all affected motorcycles. *tt | 08/18/2003 | |
EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL | |||||
SB-M-1234 | 12/05/2008 | 10030773 | Harley davidson motorcycle: flywheel end play specifications were changed from 0.003-0.010 in. (0.076-0.254mm) to 0.003-0.013 in. (0.076-0.330mm). spoke torque has changed to 55 in-lbs (6.2 nm) on all spoke wheels. use spoke torque wrench | 11/30/2009 | |
939 | 09/16/2008 | 10026262 | Harley davidson motorcycles: an incorrect screw was used in the packaging of 29299-08, screamin eagle heavy breather kit. *pe | 10/10/2008 | |
POWER TRAIN - CLUTCH ASSEMBLY | |||||
M1102 | 05/19/2000 | 613477 | This bulletin is to inform you of a modified clutch cable routing for certain models. *tt | 07/19/2000 | |
STRUCTURE - BODY | |||||
P-44 | 10/05/1998 | 603297 | Information regarding ignition modules and performance coil kits. *yc | 02/17/1999 | |
UNKNOWN OR OTHER | |||||
SB-M-1234 | 12/05/2008 | 10030773 | Harley davidson motorcycle: flywheel end play specifications were changed from 0.003-0.010 in. (0.076-0.254mm) to 0.003-0.013 in. (0.076-0.330mm). spoke torque has changed to 55 in-lbs (6.2 nm) on all spoke wheels. use spoke torque wrench | 11/30/2009 |