Hino Na6j 2009
Model Na6j made in 2009 by Hino got 2 recalls as well as 4 service bulletins. Technical service bulletines regarding engine and engine cooling and fuel system, gasoline. There were some recalls concerningelectrical system and engine and engine cooling.
Model 2009
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ELECTRICAL SYSTEM - BATTERY - CABLES | ||||||||||||||||
12V555000 | HINO MOTORS SALES U.S.A., INC. | from 08/18/2003 to 11/16/2011 | V (Vehicle) | 35168 | 01/17/2013 | MFR | Hino Motors Sales U.S.A., Inc. | 12/03/2012 | 12/04/2012 | |||||||
Defect Summary | Hino is recalling certain model year 2005 through 2013 medium duty trucks, models na6j, nb6j, nc6j, nd8j, ne8j, nj8j, nf8j, and nv8j, manufactured from august 18, 2003, through november 16, 2011. over time, the main b+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the b+ circuit and its convoluted tubing sheath. | |||||||||||||||
Consequence Summary | If the b+ circuit shorts to ground, it may lead to a fire. | |||||||||||||||
Corrective Summary | Hino will notify owners, and dealers will repair the vehicles free of charge. the recall began on january 17, 2013. owners may contact hino at 1-248-699-9390. | |||||||||||||||
Notes | Hino's recall campaign number is a8310.owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov. | |||||||||||||||
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM | ||||||||||||||||
10V155000 | HINO MOTORS SALES U.S.A., INC. | V (Vehicle) | 560 | MFR | HINO MOTORS SALES U.S.A., INC. | 04/16/2010 | 04/16/2010 | |||||||||
Defect Summary | Hino is recalling certain model year 2010 trucks. the upper bolt of the center exhaust hanger may not have been properly tightened during the manufacturing process. if the bolts were over tightened, the bolts and the hanger bracket may have been damaged. this could cause the bolt to fail and thus the exhaust system would not be supported as designed. | |||||||||||||||
Consequence Summary | This condition would place additional stress on the other exhaust support devices and could lead to additional failures. if this condition were undetected it ultimately could result in the exhaust system separating from the vehicle, thus falling onto the surface of the roadway. if this fallen portion of the exhaust system is struck by a vehicle it could ultimately result in a crash. | |||||||||||||||
Corrective Summary | Hino will notify owners and dealers will repair the vehicles free of charge. the safety recall is expected to begin on or about august 2, 2010. owners may contact hino at 248-699-9330. | |||||||||||||||
Notes | Hino recall no. m0170. owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
ENGINE AND ENGINE COOLING - ENGINE | |||||
SB-R-0034 | 03/03/2009 | 10028857 | Hino trucks: abnormal noise and vibration within the engine occurs due to the impeded operation of the injector needle which is caused by the formation of deposits in the fuel. *pe | 06/03/2009 | |
FUEL SYSTEM, GASOLINE - DELIVERY - HOSES, LINES/PIPING, AND FITTINGS | |||||
SL-R-0032 | 03/03/2009 | 10028861 | Hino trucks: abnormal noise and vibration within the engine occurs due to the impeded operation of the injector needle which is caused by the formation of deposits in the fuel. *pe | 06/03/2009 | |
FUEL SYSTEM, GASOLINE - FUEL INJECTION SYSTEM - INJECTORS | |||||
SB-R-0034 | 03/03/2009 | 10028857 | Hino trucks: abnormal noise and vibration within the engine occurs due to the impeded operation of the injector needle which is caused by the formation of deposits in the fuel. *pe | 06/03/2009 | |
FUEL SYSTEM, OTHER - DELIVERY - HOSES, LINES/PIPING, AND FITTINGS | |||||
SB-R-0029 | 03/03/2009 | 10028850 | Hino trucks: the fuel tank breather hose(s) has been modified to prevent water from entering into the fuel tank(s). *pe | 06/03/2009 |