Hino Nv8j 2005

Model Nv8j made in 2005 by Hino got 10 recalls. There were some recalls concerningelectrical system, engine and engine cooling and exterior lighting.

Model 2005

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ELECTRICAL SYSTEM - BATTERY - CABLES
12V555000HINO MOTORS SALES U.S.A., INC.from 08/18/2003 to 11/16/2011V (Vehicle)3516801/17/2013MFRHino Motors Sales U.S.A., Inc.12/03/201212/04/2012
Defect SummaryHino is recalling certain model year 2005 through 2013 medium duty trucks, models na6j, nb6j, nc6j, nd8j, ne8j, nj8j, nf8j, and nv8j, manufactured from august 18, 2003, through november 16, 2011. over time, the main b+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the b+ circuit and its convoluted tubing sheath.
Consequence SummaryIf the b+ circuit shorts to ground, it may lead to a fire.
Corrective SummaryHino will notify owners, and dealers will repair the vehicles free of charge. the recall began on january 17, 2013. owners may contact hino at 1-248-699-9390.
NotesHino's recall campaign number is a8310.owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
ENGINE AND ENGINE COOLING
06V157000HINO MOTORS SALES U.S.A., INC.from 10/22/2003 to 06/10/2005V (Vehicle)393005/02/2006MFRHINO MOTORS SALES U.S.A., INC.05/10/200605/10/2006
Defect SummaryOn certain trucks equipped with bando belt tensioner, corrosion or rust may develop on the tensioner spindle or bushing causing the auto tensioner to become stiff or bind. this can cause the drive belt to suddenly come off or the auto tensioner mounting bolts could suddenly break.
Consequence SummaryIf the drive belt comes off, the alternator warning lamp will illuminate. if the warning is ignored, this condition could ultimately result in a loss of vehicle power (engine stall) increasing the risk of a crash.
Corrective SummaryDealers will replace the auto tensioner, install upgraded mounting bolts, and replace the accessory drive belt free of charge. the recall began on may 2, 2006. owners may contact hino motors at 248-648-6430. this campaign has been superseded - please see 07v208.
NotesHino motors recall no. a4790.customers may also contact the national highway traffic safety administration
07V208000HINO MOTORS SALES U.S.A., INC.from 10/22/2003 to 04/02/2007V (Vehicle)1458804/25/2007MFRHINO MOTORS SALES U.S.A., INC.05/09/200705/15/2007
Defect SummaryOn certain trucks equipped with bando belt tensioner, corrosion or rust may develop on the tensioner spindle or bushing causing the auto tensioner to become stiff or bind. this can cause the drive belt to suddenly come off or the auto tensioner mounting bolts could suddenly break.
Consequence SummaryIf the drive belt comes off, the alternator warning lamp will illuminate. if the warning is ignored, this condition could ultimately result in a loss of vehicle power (engine stall) increasing the risk of a crash.
Corrective SummaryDealers will replace the auto tensioner, install upgraded mounting bolts, and replace the accessory drive belt free of charge. the recall began on april 25, 2007. owners may contact hino motors at 248-648-6430. note: this recall supersedes a previous campaign (please see 06v157).
NotesHino recall no. a5340.customers mayalso contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
EXTERIOR LIGHTING - BACK UP LIGHTS
04V098000HINO MOTORS SALES U.S.A., INC.from 10/01/2003 to 01/31/2004V (Vehicle)25504/19/2004MFRHINO MOTORS SALES U.S.A., INC.02/25/200403/25/2004571108
Defect SummaryCertain trucks equipped with manual transmissions fail to comply with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment. a reverse backup switch may have been contaminated during the manufacturing process. the neutral safety switch may not allow the cruise control to engage.
Consequence SummaryThis does not meet the requirements of the standard. also, this could cause the cruise control not to be activated. the reverse backup light and buzzer stays on.
Corrective SummaryDealers will replace the switches. owner notification began on april 19, 2004. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact hino at 1-845-365-1400.
NotesHino recall no. a3260.customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
SERVICE BRAKES, AIR - SUPPLY - HOSES, LINES/PIPING, AND FITTINGS
05V240000HINO MOTORS SALES U.S.A., INC.from 10/01/2004 to 04/15/2005V (Vehicle)26206/04/2005MFRHINO MOTORS SALES U.S.A., INC.05/25/200505/27/2005
Defect SummaryOn certain truck cab and chassis vehicles, a brake air line could become disconnected.
Consequence SummaryThis could cause a decrease of braking ability or the parking brake to apply without being activated, increasing the risk of a crash.
Corrective SummaryDealers will inspect each vehicle and check the torque on the nuts. if the nuts are not torqued properly, they will be tightened to the proper specification. the recall began on june 4, 2005. owners may contact hino at 1-248-648-6400.
NotesHino recall no. m0010.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
STEERING
04V448000HINO MOTORS SALES U.S.A., INC.from 10/01/2003 to 09/07/2004V (Vehicle)336610/08/2004MFRHINO MOTORS SALES U.S.A., INC.09/20/200409/20/2004
Defect SummaryOn certain trucks, when the steering wheel is being turned, the dust cover may twine with the steering shaft and could result in the steering wheel operation becoming heavy.
Consequence SummaryLoss of steering control may occur, which could result in a crash.
Corrective SummaryDealers will remove the old dust cover and install a newly designed cover. the recall began october 8, 2004. owners should contact hino at 1-845-365-1400.
NotesHino recall no. a3740.customers can also contact the national highway traffic safety administration
STEERING - LINKAGES
04V202000HINO MOTORS SALES U.S.A., INC.from 10/01/2003 to 04/15/2004V (Vehicle)81005/07/2004MFRHINO MOTORS SALES U.S.A., INC.04/28/200404/29/2004
Defect SummaryOn certain trucks, the pinch bolt nut of the yoke connecting the steering gearbox and the steering wheel shaft backed out.
Consequence SummaryThis could cause the yoke and the steering wheel shaft to separate which could result in loss of steering increasing the risk of a crash.
Corrective SummaryDealers will inspect and retorque the pinch bolt nut as necessary. owner notification began may 7, 2004. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact hino at 1-845-365-1400.
NotesHino recall no. a3370.customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
06V169000HINO MOTORS SALES U.S.A., INC.from 10/01/2004 to 03/25/2006V (Vehicle)507205/12/2006MFRHINO MOTORS SALES U.S.A., INC.05/18/200605/18/2006
Defect SummaryOn certain trucks, during assembly, the drag link attachment nuts at the pitman arm and steering arm may have been incorrectly torqued. residual grease and paint which was applied as a rust inhibitor on the steering arm may have contributed to a loss of torque after assembly.
Consequence SummaryIncreased wear for the draglink connections can occur creating a noticeable increase in the amount of steering wheel free play. if this condition was ignored, a loss of steering control of the vehicle could occur which could result in a crash.
Corrective SummaryDealers will inspect the steering arm tightness and remove all grease and paint from the steering arms and retorque the draglink attachment nuts at the steering arm and pitman arm. the recall began on may 12, 2006. owners may contact hino at 1-248-648-6430.
NotesHino recall no. m0050.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
SUSPENSION - FRONT
08V195000HINO MOTORS SALES U.S.A., INC. to 09/27/2007V (Vehicle)1680509/22/2008MFRHINO MOTORS SALES U.S.A., INC.04/30/200804/30/2008
Defect SummaryHino is recalling 16,805 my 2005-2008 na6j, nb6j, nc6j, nd8j, ne8j, nj8j, and nv8j trucks. the two vertical right/left side front spring bracket bolts were not tightened properly during the assembly process. this may cause increased stress on the spring bracket which can lead to cracking of the bracket.
Consequence SummaryThis could reduce steering control increasing the risk of a crash.
Corrective SummaryDealers will replace the vertical front spring bracket attachment bolts on right/left hanger brackets and re-torque all associated bolts free of charge. the recall began on september 8, 2008. owners may contact hino at 248-699-9300.
NotesHino recall no. a5850.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
VEHICLE SPEED CONTROL - ACCELERATOR PEDAL
04V439000HINO MOTORS SALES U.S.A., INC. to 09/07/2004V (Vehicle)336609/08/2004MFRHINO MOTORS SALES U.S.A., INC.09/13/200409/17/2004
Defect SummaryOn certain cab and chassis trucks, when excessive force is applied to the accelerator pedal, beyond that required to achieve full acceleration, the pedal may become wedged between the floor panel and the carpet.
Consequence SummaryWhen this occurs, the accelerator pedal will become wedged in the full throttle position which could result in a crash without warning.
Corrective SummaryDealers will inspect the accelerator pedal height to determine if it is within specifications. if either the pedal height or the accelerator rod is not within specifications, replace the accelerator assembly. in addition, a new bracket containing an accelerator pedal stopper will be installed. the recall began on september 8, 2004. owners should contact hino customer service at 1-845-365-1400.
NotesHino recall no. a3720.customers can also contact the national highway traffic safety administration