Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| SERVICE BRAKES, HYDRAULIC | |||
| 12/19/1996 | 0 | ||
| While driving vehicle lost braking power while braking, had slid into a parked vehicle, the engine would shut down at the same time. vehicle taken to repair, could not find problem or duplicate problem. *ak | |||
| SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||
| 10/01/2012 | 1 | ||
| 1991 honda accord. consumer states anti-lock braking system failed *tgw the dealer informed the consumer the required replacement part was not available from honda or any after-market source. | |||
| 06/01/2001 | |||
| While driving in stop & go traffic, under hot weather conditions, brake pedal will go directly to floor when pressure is applied. dealership stated that there is no visible signs of a problem when looking at outside of master cylinder. o-rings on inside can degrade and cause brake failure. please provide any additional information/attachments. *ak | |||
| 01/01/1998 | |||
| Consumer was driving at 35 mph and applied the brakes, and they locked up. abs system di''nt kick in due to the brake module failure. *ak | |||
| 03/15/1997 | 07/07/1991 | ||
| Excessive and continuous leakage of brake fluid from abs fluid reservoirs. also abs warning light comes on/off. *ak | |||
| When to applying abs brakes the brake light came on there was a noise and no braking . please describe . *ak | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||
| 10/01/1999 | 20 | 04/01/1991 | |
| Brake fade in hot weather and a/c running. | |||
| The whole brake hydraulic system had to be replaced . tt | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER | |||
| 01/01/1995 | 1 | ||
| Brake system assembled with two different calipers, causing premature caliper failure. *aw | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER | |||
| 01/19/2003 | 145520 | 0 | 04/13/2002 |
| During normal to hot weather conditions and in stop and go traffic the brake pedal fail and went directly to the floor when press. the car slowly slow down when this happen and has no braking feeling in the front wheels. | |||
| 06/01/2001 | |||
| While driving in stop & go traffic, under hot weather conditions, brake pedal will go directly to floor when pressure is applied. dealership stated that there is no visible signs of a problem when looking at outside of master cylinder. o-rings on inside can degrade and cause brake failure. please provide any additional information/attachments. *ak | |||
| 1 | 04/01/1991 | ||
| Needed to apply more pressure on brake pedal to get vehicle to stop properly. dealer / manufacturer were not notifiied at this time. *ak brake pedal goes to floor intermittently due to master cylinder failure. *yh | |||
| When sitting at a stop brake pedal decompresses by itself,and when stopping pedal goes to the floor at times. mechanic says its common with hondas. brake master cylinder has to be replaced. *ak | |||
| 05/12/1999 | |||
| When the brakes are applied the pedal becomes hard . owner has taken vehicle to repairshop and was informed that the mastercylinder needs to be replaced. the manufacturer has not been notified. *ak | |||
| 07/07/1996 | |||
| While at stop light vehicle proceeded to go through intersection with foot on brake, pedal went to floor. the brake master clylinder failed and was replaced. *ak | |||
| 05/29/1996 | 1 | ||
| Master cylinder replaced. | |||
| The master cylinder fails at 40,000 mile. it lets in brake fluid into rubber diaphram and you have no brakes. please describe. tt | |||
| SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE WARNING | |||
| 12/24/1996 | 1 | 05/01/1991 | |
| Brake warning light illuminated. | |||