Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
STRUCTURE
20402/16/200410014248Water leak at doors and/or floor. *nm04/29/2005
STRUCTURE - BODY
10010210/01/200210005913Soggy floor carpet during car wash. honda servicenews. *tt03/18/2004
0000403/06/200100004619916Experiencing a rattle from the front of the vehicle when driving over rough roads or small bumps. *tt07/05/2001
9603903/02/199996039604554Information on moonroof seal along the front edge of the glass sticks up or squeaks on vehicles within various vins. *tt05/05/1999
9807910/20/1998602681A rattling/ buzzing noise is coming from one corner or both corners of the rear shelf. *yc01/06/1999
9708512/22/1997600551Experiencing rattling from the rear package tray. *yc05/20/1998
STRUCTURE - BODY - DOOR
9702102/22/200097021610315Some vehicles with various vins may have one or both of the front windows bindng or have come out of the window run channel. *tt04/25/2000
0001302/01/2000610305A condition exist where the rear doors are hard to open. *tt04/25/2000
9803504/21/1998601138Power door locks intermittently lock themselves. *yc07/06/1998
STRUCTURE - BODY - HOOD
0000401/25/2000610307Some 4-door vehicles from vin 1hgej ... yl000001 thru vin 1hgej ... yl006038 and 2-doors from vin 1hgej ... yl000001 thru vin 1hgej ... yl007501 may exhibit a rattle from the front of the vehicle when driving over rough roads or small bumps04/25/2000
STRUCTURE - FRAME AND MEMBERS
01090109/01/2001626808Information regarding water leakage during a car wash. *yh12/18/2001

Consumer Complaints


Fail datemilesoccurencesPurchase date
STRUCTURE
02/10/2003108/30/1999
 The paint on my 98 civic is fading....there are white chalky patches all over the hood. it looks absolutely terrible; the delamination defect is quite obvious. sunlight fades the paint! *jb
STRUCTURE - BODY
03/31/2012230000
 Driving at 55 mph a ford focus pulled straight out in front of me and came to a stop. i was approximately 1 car length away when they did this so i did not have time to stop and could not pull out around them because i would have been in oncoming traffic. i t-boned this vehicle doing 55 mph and they were stopped. my front end hit directly on their front drivers side. their front left fender and tire were bent in and both of their front air bags deployed. my whole front end was crushed in and the center of my hood looked like i hit a tree. none of my air bags deployed. if i had not been wearing my seat belt i would have been more seriously injured than i was. where are the sensors for air bag deployment? shouldn't mine have deployed?
05/20/2011
 On may 20, 2011, around 5:45 -6:00 in the morning. i was traveling south on i-95 near the rest area in glynn county just a little after exits 42. it appeared that i had ran over a semi-truck tire that was in the far right lane. it was later comfrim after getting a little closer to the rest area a semi-truck was on the side of the road getting a tire replace by an towing company. while on my lunch break i notice the left drivers of my vechile had been damage due the object in the road this morning.
03/01/199804/01/1998
 Defective reaction to sunlight. white chalky spots appear on hood/front panels and front roof panels when exposed to sunlight.
204/01/1998
 White chalky spots appear on hood, front panels, and front roof panels when exposed to sunlight.
STRUCTURE - BODY - BUMPERS
07/25/2000102/01/2000
 I had the bumper replaced by honda of hollywood through the other partys insurance, however it took almost 2months to have done because they were giving me the run around. i had the bumper replaced 9/11/00 and richard in the hollywood honda autobody shop tells me that there should be an opening where the bumper and body of the car meet. i told him when i purchased the car it was like that the two met closely and now he is trying to convince me that its was never like that and to look at all the other hondas they are not close together. at this point 2 months of being dumped on, the farmers insurance adjuster from the guilty party made a deal with richard from my initial precise estimate of $895.00 to honda's $413.00 and the bumper is worse off. i need a lawyer can someone help me out? *ak
05/01/1999208/01/1998
 Right front fender edge next to front edge of the door pushes in during normal use, this has bent the fender and interfacing from normal opening of the door. yh
06/01/1998
 Consumer got into accident, claims that 2/3 of the damage could have been prevented if the bumpers were made out of a more crush resistant material.
108/30/1998
 Bumper failed. yh
STRUCTURE - BODY - DOOR
04/22/2007211/27/1999
 Both rear doors are inaccessible from the exterior of the vehicle. first occurrence was with the passenger side rear door approx. 1 month ago. the most recent occurrence is with the driver side rear door < 1 week ago. *tr
04/15/1999
 On-going / intermittent problem of electrical shorts / statistic electricity received from either side of the doors; dealer notified and informed that nothing could be done. unless consumer is willing to pay for electrical diagnostic or rewiring. *ak
3
 Rear passenger door handle gets loose even after repair. yh
101/01/1998
 Fabric on left and right door panel worn excessively.
STRUCTURE - BODY - DOOR - HINGE AND ATTACHMENTS
110/08/1998
 Front door does not stay open while the passenger wishes to exit.
STRUCTURE - BODY - HOOD
10/21/1999210/01/1999
 The support rod for the hood is approximately 1 ft. in length, and is located approximately one foot from the hood hinge. the support rod also contains a manufactured bend in the center that is meant to fold under pressure. it failed. slight pressure was applied to the hood while in the raised position between 1.5 and 3.5 inches . the hood bent on the rod. there was no extra reinforcement in the manufactured placement area provided for the rod. the damage is minimal.....only a 1/4 inch dimple in the hood, but the hood is so thin that the only manufacturer recommended repair is complete replacement of the hood. i feel that this is a definite design flaw; the entire weight of the hood pivots on the rod at only one foot in distance from the fulcrum(hinge). physically it is a certainty that damage is inevitable.
03/01/199804/01/1998
 Defective reaction to sunlight. white chalky spots appear on hood/front panels and front roof panels when exposed to sunlight.
STRUCTURE - BODY - HOOD - HINGE AND ATTACHMENTS
1
 Defect in the hood support rod caused the hood to come crashing down, almost resulting in injuries, support rod broke in half in the middle of rod. *ak the hood came down with enough force to buckle it. *slc
STRUCTURE - BODY - TRUNK LID
11/01/2000110/01/1998
 Rear trunk lid will not stay open if vehicle is on an incline, on one occasion consumer opened the trunk lid, bent over and reached inside the trunk, the lid came down on his head injurying him. *slc
01/01/1998
 While opening truck lid falls immediately on occupant which may cause injuries. honda said it's a poor design of truck. please provide further information.*ak
05/18/199805/01/1998
 Trunk lift springs are totally ineffective and allow trunk lid to drop suddenly striking any person or object in its path
302/01/1997
 Trunk lid won't stay open.
STRUCTURE - FRAME AND MEMBERS
1
 Air leakage into structure due to possible alignment problems along front bumper/hood enclosure, causing pollutants to enter vehicle and consumer discomfort (headache). mjs
03/01/199804/01/1998
 Defective reaction to sunlight. white chalky spots appear on hood/front panels and front roof panels when exposed to sunlight.
03/01/199804/01/1998
 White chalky spots appear on hood/front panels and front roof panels when exposed to sun light.
03/01/199804/01/1998
 Defective reaction of vehicle to sunlight. white chalky spots appear on hood/front panels.
01/27/1998211/22/1997
 Sheet metal fatigue on both front fenders.
STRUCTURE - FRAME AND MEMBERS - UNDERBODY SHIELDS
05/18/1998103/28/1998
 Faulty heat shield on the exhaust system. *yc