Honda Civic Gx
Model Civic Gx made by Honda got 11 consumer complains there are 2 recalls as well as 8 service bulletins. Consumer complaints with reference, among others things, to engine and engine cooling, visibility. Technical service bulletines regarding digital instrument panel, engine and engine cooling and equipment. There were some recalls concerningexterior lighting, service brakes, hydraulic.
Model 2006
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EXTERIOR LIGHTING - BRAKE LIGHTS - SWITCH | ||||||||||||||||
07V402000 | HONDA (AMERICAN HONDA MOTOR CO.) | from 08/01/2006 to 09/01/2006 | V (Vehicle) | 130000 | 10/02/2007 | MFR | HONDA (AMERICAN HONDA MOTOR CO.) | 09/05/2007 | 09/05/2007 | |||||||
Defect Summary | On certain sedan and hybrid (cng) vehicles, during assembly, the telescopic steering column mechanism may have been over-lubricated with silicone grease. over time, some of this extra grease may drip on the brake light switch causing the switch to fail. | |||||||||||||||
Consequence Summary | Failure may result in a loss of brake lights and an increased risk that the vehicle could be struck in the rear. in addition, a failed brake light switch could prevent shifting the transmission from the park position (vehicles with an automatic transmission). | |||||||||||||||
Corrective Summary | Dealers will replace the brake light switch and install a protective cover overthe switch free of charge. the recall began on october 2, 2007. owners may contact honda at 1-800-999-1009. | |||||||||||||||
Notes | Honda recall no. q58.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. | |||||||||||||||
SERVICE BRAKES, HYDRAULIC - ANTILOCK - WHEEL SPEED SENSOR | ||||||||||||||||
07V399000 | HONDA (AMERICAN HONDA MOTOR CO.) | from 06/03/2006 to 09/01/2006 | V (Vehicle) | 260000 | 09/25/2007 | MFR | HONDA (AMERICAN HONDA MOTOR CO.) | 09/05/2007 | 09/05/2007 | |||||||
Defect Summary | On certain vehicles, the wheel speed sensor housing uses an o-ring seal to prevent leakage to or from the wheel bearing. if assembled improperly, the o-ring may not seal properly allowing water to enter the wheel bearing and eventually cause damage to the bearing, especially in areas where use of road salt is prevalent. if the driver continues to drive with this condition it is possible for the wheel bearing to become loose, which could cause the bearing to fail. | |||||||||||||||
Consequence Summary | This could cause a wheel to fall off of the vehicle, possibly resulting in a crash. | |||||||||||||||
Corrective Summary | Dealers will inspect the rear abs sensors and wheel bearings for damaged parts and replace them free of charge. the recall began on september 25, 2007. owners may contact honda at 1-800-999-1009. | |||||||||||||||
Notes | Honda recall no. q56.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
DIGITAL INSTRUMENT PANEL | |||||
SB-06-085 | 05/09/2008 | 10032953 | Honda: warranty extension-vehicle warranty mileage. class action lawsuit alleging that the odometers on certain 2002-2006 honda models were overstating mileage. federal court provided final approval of settlement on 12/29/07. no models | 06/16/2010 | |
ENGINE AND ENGINE COOLING - COOLING SYSTEM | |||||
08-038 | 08/01/2008 | 10026085 | Honda: product update: water pump pulley flange cracks. a crack pulley flange may create a pulley noise, cause the water pump to fail, and cause the drive belt to break. *pe updated 12/19/08. csc letter was received. *pe | 09/29/2008 | |
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE - BELTS AND ASSOCIATED PULLEYS | |||||
08-039 | 08/15/2008 | 10026791 | Honda: due to a manufacturing problem, the water pump pulley bolts may lose tension and eventually come loose. loose pulley bolts may produce a pulley noise and could cause the drive belt to break. csc letter was received. *pe | 12/16/2008 | |
EQUIPMENT - OTHER - LABELS | |||||
08-040 | 05/31/2008 | 10025523 | Load carrying capacity reduced label for all honda vehicles. *pe | 08/15/2008 | |
FUEL SYSTEM, GASOLINE - STORAGE - AUXILLARY TANK | |||||
SB-01-005 | 08/10/2011 | 10040494 | Honda: fuel tank assembly warranty information. *rm | 08/31/2011 | |
SB-01-005 | 08/10/2011 | 10040494 | Ready | 08/31/2011 | |
VISIBILITY - WINDSHIELD WIPER/WASHER | |||||
SB-07-071 | 09/17/2008 | 10026924 | Honda: when the windshield wipers are turned off, they intermittently do not stop (park) at the correct location at the bottom of the windshield or they continue to run. *pe | 01/05/2009 | |
VISIBILITY - WINDSHIELD WIPER/WASHER - MOTOR | |||||
SB-07-071 | 09/17/2008 | 10026924 | Honda: when the windshield wipers are turned off, they intermittently do not stop (park) at the correct location at the bottom of the windshield or they continue to run. *pe | 01/05/2009 |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
ENGINE AND ENGINE COOLING - ENGINE | |||
12/15/2010 | 63000 | ||
The bolt that holds the serpentine belt tension idler pulley has failed twice on my vehicle. it's a fatigue failure from bolt bending load; a design failure. i have been fortunate that both failures occurred at low speeds on side streets. if this occurred at speed where i could not pull over immediately, i could have been in severe danger with loss of power, engine seizing and a possible fire. | |||
VISIBILITY | |||
05/01/2011 | 76000 | ||
Summary: i have a 2006 honda civic and the driver's visor just decided to come apart. , but it will not stay up in it's proper position, instead, it falls in front of my face causing me to be distracted i can't see the street lights i cannot afford to replace it just yet as i am expecting a baby. i have to leave it down at all times, and it cannot be pushed back, i have to leave it straight down in my face and bend down to see street lights and other things. it just did this one day, and i never even use my visor. just this week the entire visor cracked and fell off now i have no visor | |||
06/03/2010 | |||
I have a 2006 honda civic and have had a problem with the sun visors splitting and falling into a down position without being able to put into an up position again. this results in an impeded view of my driving field. when i try to move it to the side window and make a turn the visor hits me in the head causing another issue while driving. within the first year i had to have the driver's side replaced (not sure about the passenger side), but it was under warranty. a year and a half ago i needed to have the driver's side replaced but it wasn't under warranty and i did not have the $65.00 to pay for it. now i need the passenger side replaced and the driver's side is so loose i have to push it up for every stop light so i can see it. it's extremely dangerous how it flops down and blocks your field of view. i made a complaint with honda but they said they can't do anything until there is a recall on the part. |