Honda Gl1800a 2004

Model Gl1800a made in 2004 by Honda got 2 consumer complains there are 2 recalls as well as 11 service bulletins. Consumer complaints with reference, among others things, to power train, suspension. Technical service bulletines regarding digital instrument panel, electrical system and engine and engine cooling. There were some recalls concerningservice brakes, hydraulic, structure.

Model 2004

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC
05V010000HONDA (AMERICAN HONDA MOTOR CO.)from 06/24/2003 to 08/04/2004V (Vehicle)3604601/31/2005MFRHONDA (AMERICAN HONDA MOTOR CO.)01/24/200501/25/2005
Defect SummaryCertain motorcycles equipped with combined-brake systems have a proportioning control valve (pcv) that mechanically proportions brake force when the rear brake is applied. a seal in some pcvs is improperly shaped, and brake fluid leakage may occur.
Consequence SummaryIf the motorcycle continues to be used after a leak occurs, the rear brake would eventually become inoperative. a loss of rear brake force could increase the risk of a crash.
Corrective SummaryDealers will inspect the rear brake forleakage. if leakage is confirmed, the dealer will replace the pcv free of charge. the recall began on january 31, 2005. owners may contact honda at 866-784-1870.
NotesHonda recall no.p65.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
STRUCTURE - FRAME AND MEMBERS
05V027000HONDA (AMERICAN HONDA MOTOR CO.)from 06/24/2003 to 09/19/2003V (Vehicle)3491902/09/2005ODIHONDA (AMERICAN HONDA MOTOR CO.)01/31/200502/01/2005
Defect SummaryOn some motorcycles, certain frame welds do not meet manufacturing specifications. high loads created when riding on rough road surfaces or through potholes can cause the affected welds to crack.
Consequence SummaryThe welded area could break, resulting in rear suspension collapse or lower cross member separation, increasing the risk of a crash.
Corrective SummaryDealers will inspect and, if necessary, reinforce the welds on 2001-2002 motorcycles free of charge. on 2003-2004 motorcycles, the units will be repaired, no inspection will be necessary. the recall began on february 9, 2005. owners may contact honda at 1-866-784-1870.
NotesHonda recall no. p66.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
DIGITAL INSTRUMENT PANEL
SB-06-08505/09/200810032953Honda: warranty extension-vehicle warranty mileage. class action lawsuit alleging that the odometers on certain 2002-2006 honda models were overstating mileage. federal court provided final approval of settlement on 12/29/07. no models06/16/2010
ELECTRICAL SYSTEM
0201200502/01/200510015267Electronic control module (ecm) replacement and initialization. honda. gl 1800/a 2001-2005. *tt07/13/2005
ENGINE AND ENGINE COOLING - ENGINE
0601200506/06/200510018124Camshaft timing - gear noise after completing valve adjustment may be incorrect camshaft timing. *nm12/15/2005
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - EMISSION CONTROL - CRANKCASE (PCV)
0501200505/01/200510016297Proportional control valve (pcv) leakage recall reminder. refer to bulletin gl1800a #16. *tt09/06/2005
EQUIPMENT - OTHER - LABELS
08-04005/31/200810025523Load carrying capacity reduced label for all honda vehicles. *pe08/15/2008
FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY
0501200405/01/200410013906Fuel tank installation tip. *jb04/27/2005
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DIFFERENTIAL PROPORTIONAL VALVE
1095702/01/200510015346Linked braking system (lbs) proportional control valve (pcv) leakage safety recall. *tt07/14/2005
STRUCTURE
0601200506/01/200510018123Frame welding tip - to ease fuel tank installation into the frame, apply a light coating of silicone spray to the sides and bottom right of the tank. *nm12/15/2005
STRUCTURE - FRAME AND MEMBERS
TSB-03V35003/01/200910030268Honda motorcycle: frame weld safety recall. requires inspection or repair of lower cross member frame welds. the frame weld approval and documentation process is being changed by the manufacturer. *pe09/16/2009
0501200505/01/200510016289Frame welding tips. *tt09/06/2005
1802/01/200510015342Frame weld safety recall. certain frame welds may not have sufficient strength resulting in lower cross member separation and rear suspension collapse. *tt07/14/2005

Consumer Complaints


Fail datemilesoccurencesPurchase date
POWER TRAIN - MANUAL TRANSMISSION
07/06/200597851
 On 2004 honda gl1800a motorcycle transmission would jump back into 4th gear from od gear. the transmission would also disengage while in od gear. *tr
SUSPENSION
07/05/2005104/01/2004
 Dt: the consumer stated that when riding the motorcycle at 40 mph and taking both hands off of the handle bars, the motorcycle would shake violently. the consumer also noticed this problem on july 5, 2005. the consumer spoke to the dealer and they were going to charge the consumer for inspecting the motorcycle. there was no warning or noise before the problem occurred. this problem occurred each time the consumer drove the motorcycle. *ak (12/08/05) *sc