International 7600 2010
Model 7600 made in 2010 by International got 2 recalls as well as 22 service bulletins. Technical service bulletines regarding electrical system and engine and engine cooling. There were some recalls concerningelectrical system and engine and engine cooling.
Model 2010
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ELECTRICAL SYSTEM - BATTERY | ||||||||||||||||
| 10V107000 | NAVISTAR, INC | from 04/23/2008 to 03/15/2010 | V (Vehicle) | 29460 | 09/10/2010 | MFR | NAVISTAR, INC | 03/18/2010 | 03/17/2010 | |||||||
| Defect Summary | Navistar has notified nhtsa of a defect on certain model year 2008-2011 international trucks equipped with an optional jump start stud. corrosion at the base of the stud may cause an electrical short between the stud and battery box. | |||||||||||||||
| Consequence Summary | An electrical short may cause a vehicle fire. | |||||||||||||||
| Corrective Summary | A final remedy for this defect has not yet been determined. an interim action will involve the removal of the jump start stud and the connecting cable. the safety recall is expected to begin late september 2010. owners may contact international dealers at 1-800-448-7825. | |||||||||||||||
| Notes | Navistar's recall campaign number is10506.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . | |||||||||||||||
| ENGINE AND ENGINE COOLING | ||||||||||||||||
| 09V425000 | NAVISTAR, INC | from 06/12/2009 to 06/24/2009 | V (Vehicle) | 21 | 09/04/2009 | MFR | NAVISTAR, INC | 10/30/2009 | 11/02/2009 | |||||||
| Defect Summary | Navistar is recalling certain model year 2008 and 2010 emergency vehicles manufactured between june 12, 2007 and june 24, 2009, equipped with cummins isb cm2150, isc cm2150, isl cm2150, ism cm876, and isx cm871 model diesel engines. the vehicles may be designed with a hard wired, dash-mounted switch that enables the vehicle operator to inhibit aftertreatment diesel particulate filter regeneration in environments where the operator believes it may be unsafe for elevated exhaust temperatures. due to an issue with the logic in the ecm software in these engines, the switch may not function correctly, leading the operator to believe that the switch is in inhibit mode when it is not. | |||||||||||||||
| Consequence Summary | This condition will permit hot exhaust gases to exit the vehicle tailpipe, increasing the risk of melting or burning of nearby surfaces, or a fire. | |||||||||||||||
| Corrective Summary | Cummins is conducting this campaign and will provide the remedy free of charge. please see cummins defect report 09e-046. owners may contact cummins at 1-800-343-7357. | |||||||||||||||
| Notes | Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . | |||||||||||||||
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ELECTRICAL SYSTEM | |||||
| AFC-11924 | 12/01/2011 | 10043127 | Navistar: certain trucks may allow water intrusion into module where seal, between two halves of eaton ecu, is located causing the 30 amp transmission fuse failure. *pe | 02/24/2012 | |
| ELECTRICAL SYSTEM - BATTERY - CABLES | |||||
| G-10917 | 10/01/2010 | 10037264 | Ready | 05/17/2011 | |
| G-10917 | 10/01/2010 | 10037264 | Navistar service campaign: see document manufacturer did not install jump start studs and associated battery cables. *rm | 05/17/2011 | |
| ENGINE AND ENGINE COOLING | |||||
| AFC-G-10924 | 01/01/2011 | 10040370 | Ready | 08/24/2011 | |
| AFC-G-10924 | 01/01/2011 | 10040370 | Navistar service campaign: see document search button for owner letter. heater and return line installation information. *rm | 08/24/2011 | |
| ENGINE AND ENGINE COOLING - COOLING SYSTEM | |||||
| AFC-G-10924 | 01/01/2011 | 10040370 | Navistar service campaign: see document search button for owner letter. heater and return line installation information. *rm | 08/24/2011 | |
| AFC-G-10924 | 01/01/2011 | 10040370 | Ready | 08/24/2011 | |
| ENGINE AND ENGINE COOLING - ENGINE | |||||
| IK-1200706 | 01/12/2012 | 10043466 | International: rail tubes, which are excessively hard, may distort fuel rail after initial installation, making replacement fuel to rail tube not seat properly. *pe | 04/03/2012 | |
| MIN-11131 | 07/28/2011 | 10040743 | Ready | 09/12/2011 | |
| MIN-11132 | 07/28/2011 | 10040744 | Ready | 09/12/2011 | |
| MIN-11132 | 07/28/2011 | 10040744 | Navistar: poor launch concerns and stored trouble codes. a software problem. *rm | 09/12/2011 | |
| MIN-11131 | 07/28/2011 | 10040743 | Navistar: there is updated ecm software. *rm | 09/12/2011 | |
| EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL | |||||
| G-10917 | 10/01/2010 | 10037264 | Ready | 05/17/2011 | |
| G-10917 | 10/01/2010 | 10037264 | Navistar service campaign: see document manufacturer did not install jump start studs and associated battery cables. *rm | 05/17/2011 | |
| POWER TRAIN - MANUAL TRANSMISSION | |||||
| AFC-11924 | 12/01/2011 | 10043127 | Navistar: certain trucks may allow water intrusion into module where seal, between two halves of eaton ecu, is located causing the 30 amp transmission fuse failure. *pe | 02/24/2012 | |
| SEAT BELTS | |||||
| TSI-10-16-06R | 10/01/2010 | 10037210 | Ready | 05/11/2011 | |
| TSI-10-16-06R | 10/01/2010 | 10037210 | Navistar: seat belts installed are from a new supplier and are not interchangeable with the old ones. *rm | 05/11/2011 | |
| SEAT BELTS - FRONT | |||||
| TSI-10-16-06R | 10/01/2010 | 10037210 | Ready | 05/11/2011 | |
| TSI-10-16-06R | 10/01/2010 | 10037210 | Navistar: seat belts installed are from a new supplier and are not interchangeable with the old ones. *rm | 05/11/2011 | |
| STRUCTURE - FRAME AND MEMBERS | |||||
| 0100025 | 05/01/2012 | 10044066 | Navistar: block heater element hits the front crossmember. the brackets for the front crossmember needs to be replaced. this applies to 7600 with 2010 epa maxx force 11 and 13 with feature code 0012864. *js | 05/09/2012 | |
| SUSPENSION - FRONT - SPRINGS - LEAF SPRING ASSEMBLY - U-BOLT, LEAF SPRING TO AXLE | |||||
| MIN-11103 | 01/18/2011 | 10040306 | Navistar: incorrect front axle lower shock mount. *rm | 08/22/2011 | |
| MIN-11103 | 01/18/2011 | 10040306 | Ready | 08/22/2011 | |