International 7700 2007
Model 7700 made in 2007 by International got 3 recalls as well as 7 service bulletins. Technical service bulletines regarding electrical system and engine and engine cooling. There were some recalls concerningparking brake and suspension.
Model 2007
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PARKING BRAKE | ||||||||||||||||
07V314000 | INTERNATIONAL TRUCK & ENGINE CORPORATION | from 11/01/2005 to 04/30/2007 | V (Vehicle) | 10882 | 09/28/2007 | MFR | NAVISTAR, INC | 07/24/2007 | 07/24/2007 | |||||||
Defect Summary | On certain 6x4 or 6x6 trucks with air brakes or tractors with air brakes and equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button. | |||||||||||||||
Consequence Summary | This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash. | |||||||||||||||
Corrective Summary | International is working with bendix to repair these vehicles (please see 07e-037). bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. the recall began on september 28, 2007. owners may contact bendix at 440-329-9000 and international at 440-329-9179. | |||||||||||||||
Notes | International recall no. 07511.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. | |||||||||||||||
PARKING BRAKE - CONVENTIONAL - AIR | ||||||||||||||||
06V231000 | INTERNATIONAL TRUCK & ENGINE CORPORATION | from 04/06/2006 to 06/09/2006 | V (Vehicle) | 1401 | 07/21/2006 | MFR | NAVISTAR, INC | 06/28/2006 | 06/28/2006 | |||||||
Defect Summary | On certain trucks equipped with sr-7 bendix brake valves, the check valve inside the valve cavity may not properly set, causing internal air leakage. if the check valve does not properly seat, the resulting leakage can cause a delay in the application of the spring brakes to park the vehicle after operator pulls the dash valve button. | |||||||||||||||
Consequence Summary | The delayed parking brake application can occur without warning, leading to unintended vehicle rollaway increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will inspect the valves and replace it free of charge. the recall began on july 21, 2006. owners may contact international at 1-800-448-7825. | |||||||||||||||
Notes | International recall no. 06506.customers can also contact the national highway traffic safety administration | |||||||||||||||
SUSPENSION | ||||||||||||||||
06V384000 | INTERNATIONAL TRUCK & ENGINE CORPORATION | from 09/13/2006 to 09/29/2006 | V (Vehicle) | 87 | 10/06/2006 | MFR | NAVISTAR, INC | 10/11/2006 | 10/11/2006 | |||||||
Defect Summary | On certain trucks equipped with chalmers rear suspensions, the adjustable torque rod end castings may be brittle. a brittle rod end casting may fracture without warning, causing the vehicles' rear axles to become misaligned. | |||||||||||||||
Consequence Summary | This misalignment can cause the vehicle to lose directional stability at speeds that may result in a vehicle crash. | |||||||||||||||
Corrective Summary | Dealers will inspect the vehicles to determine if they were manufactured with a suspect torque rod end. if a suspect torque rod end is found, the entire torque rod will be replaced. the recall began on october 6, 2006. owners may contact international at 1-800-448-7825. | |||||||||||||||
Notes | International recall no. 06509.customers can also contact the national highway traffic safety administration |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
ELECTRICAL SYSTEM | |||||
IK0800131 | 03/12/2008 | 10025548 | Lose all of gauges when hooked up with dlb. applies to all vehicles with esc's or bc's. *pe | 08/19/2008 | |
ENGINE AND ENGINE COOLING - COOLING SYSTEM - FAN | |||||
AFC-08915 | 08/01/2008 | 10027584 | Navistar: some engine fan blades equipped with caterpillar and cummins engines have experienced cracking. *pe | 01/26/2009 | |
071214 | 09/01/2007 | 10023454 | International truck and engine corporation - severe service fan blade failures. *nj | 12/12/2007 | |
ENGINE AND ENGINE COOLING - ENGINE - DIESEL | |||||
AFC-09908 | 10/01/2009 | 10032639 | Navistar: implementation of engine recalibration. this will require the recalibration of the engine ecm. in cold weather conditions, the software upgrade will ensure proper lubrication of the turbocharger by delaying accelerator pedal res | 04/21/2010 | |
AFC-08915 | 08/01/2008 | 10027584 | Navistar: some engine fan blades equipped with caterpillar and cummins engines have experienced cracking. *pe | 01/26/2009 | |
POWER TRAIN - MANUAL TRANSMISSION - FLOOR SHIFT ASSEMBLY | |||||
IK 1300064 | 07/15/2008 | 10025942 | International: manual shift lever jumps out of gear on 7000's and 8000's vehicles. 7600 (1/1/02-2/1/08); 7700 (1/1/04-2/1/08): 8600 (1/1/02-2/1/08). *pe | 09/17/2008 | |
POWER TRAIN - TRANSFER CASE (4-WHEEL DRIVE) | |||||
061302 | 05/01/2006 | 10020357 | Guidelines to ensure satisfactory performance of meritor transfer case models mtc-4208, mtc-4210, mtc-4213 in certain international 7000 hpv models. *tt | 09/20/2006 |