International 9000 2002
Model 9000 made in 2002 by International got 1 investigation there are 4 recalls as well as 3 service bulletins. Technical service bulletines regarding electrical system, fuel system, gasoline and power train. The car had one investigation (suspension). There were some recalls concerningservice brakes, air, suspension.
Model 2002
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SERVICE BRAKES, AIR | ||||||||||||||||
| 03V137000 | INTERNATIONAL TRUCK & ENGINE CORPORATION | from 02/12/1998 to 01/28/2002 | V (Vehicle) | 2818 | 04/18/2003 | MFR | NAVISTAR, INC | 04/03/2003 | 04/22/2003 | |||||||
| Defect Summary | On certain heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. with certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. the subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail. | |||||||||||||||
| Consequence Summary | If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash. | |||||||||||||||
| Corrective Summary | Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. on a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. owner notification began on april 18, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
| Notes | International recall no.02506. customers can also contact the national highway traffic safety administration | |||||||||||||||
| SERVICE BRAKES, AIR - SUPPLY - CHECK VALVE | ||||||||||||||||
| 02V241002 | INTERNATIONAL TRUCK AND ENGINE | from 04/24/2002 to 06/21/2002 | V (Vehicle) | 3156 | 12/31/2002 | MFR | NAVISTAR, INC | 09/20/2002 | 09/24/2002 | |||||||
| Defect Summary | On certain heavy duty trucks equipped with bendix tc-7 trailer control hand-operated valve with push-to-connect fittings. the delivery port in the valve body may be partially blocked due to a problem during the moding process. | |||||||||||||||
| Consequence Summary | Such blockage may slow the delivery and exhaust of air to and from the trailer brakes when they are operated by this hand-operated trailer control valve. | |||||||||||||||
| Corrective Summary | International will replace the hand-operated control valves. owner notification began december 31, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
| Notes | Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
| 02V135002 | INTERNATIONAL TRUCK AND ENGINE | from 09/02/1997 to 03/04/2002 | V (Vehicle) | 108560 | 11/11/2002 | MFR | NAVISTAR, INC | 05/20/2002 | 09/06/2002 | |||||||
| Defect Summary | On certain medium and heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. with certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. the subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail. | |||||||||||||||
| Consequence Summary | If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash. | |||||||||||||||
| Corrective Summary | Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. on a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. owner notification began september 11, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
| Notes | Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
| SUSPENSION - FRONT - HUB | ||||||||||||||||
| 03V193000 | INTERNATIONAL TRUCK & ENGINE CORPORATION | from 01/09/1998 to 10/09/2001 | V (Vehicle) | 2163 | 11/12/2003 | ODI | NAVISTAR, INC | 05/21/2003 | 06/03/2003 | |||||||
| Defect Summary | On certain heavy and medium duty trucks and buses equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely. | |||||||||||||||
| Consequence Summary | Seizure of the bearings can cause wheel separation or wheel end fire. | |||||||||||||||
| Corrective Summary | Dealers will replace all front axle hubs. owner notification began on november 12, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
| Notes | International recall no. 03510.customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ELECTRICAL SYSTEM | |||||
| IK-0800127 | 02/13/2008 | 10032931 | International: gauges dropping out on 5000 and 9000 series trucks. disconnect the module for the boost gauge, all gauges should start working now if this is the issue. not working or don't have boost gauge then this is not your issue. n | 06/14/2010 | |
| FUEL SYSTEM, GASOLINE - STORAGE - TANK ASSEMBLY - FILLER PIPE AND CAP | |||||
| IK 1500040 | 07/15/2008 | 10025943 | International: three inch fuel tank fill cap gasket cracking. applies to heavy duty models. some of the three inch fuel fill cap gaskets have been cracking. used primarily on heavy duty vehicles like 5000, 8000, 9000 and prostar. *pe | 09/17/2008 | |
| POWER TRAIN | |||||
| 0322 | 03/27/2003 | 10002302 | Meritor platform g transmission synchronizer replacements. *tt | 08/20/2003 | |
Investigations
| NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
|---|---|---|---|---|---|---|
| SUSPENSION - FRONT - HUB | ||||||
| PE02092 | NAVISTAR, INC | 12/03/2002 | 05/23/2003 | INTEGRAL HUB AND BEARING ASSEMBLY | 03V193000 | |
| The companies involved in this matter are:skf (hub mfr), arvinmeritor (front axle mfr), and international,( manufacturers of medium duty trucks).skf identified manufacturing defects for specific build dates on front axle hub and bearings (wheel bearings) supplied to arvin meritor.as a result, arvinmeritor notified international of axles supplies with possible defective front hub assemblies.as a result of that notification, 2041 trucks are being recalled by international for defective front axle wheel bearings which may fail in such a way that a wheel separation or wheel bearing fire occurs.see attached summary report for additional details. | ||||||