International Harvester 4700 2000

Model 4700 made in 2000 by International Harvester got 5 recalls as well as 2 service bulletins. Technical service bulletines regarding engine and engine cooling and (pws). There were some recalls concerningpower train and seats.

Model 2000

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
POWER TRAIN - AUTOMATIC TRANSMISSION
00V229004INTERNATIONAL TRUCK AND ENGINEfrom 03/21/2000 to 06/21/2000V (Vehicle)4MFRINTERNATIONAL TRUCK & ENGINE CORPORATION09/26/200010/27/2000
Defect SummaryVehicle description: trucks equipped with allison 1000 or 2400 series transmissions. these transmissions can experience park pawl to rear cover interference due to an out of flatness condition.
Consequence SummaryThis could cause non-engagement of the park pawl when the transmission shift selector is moved to the park position, resulting in unintended vehicle movement and a vehicle crash without prior warning.
Corrective SummaryAllison transmission is conducting the owner notification and remedy for this campaign. dealers will remove the transmission from the vehicle, replace the park pawl, and reinstall the transmission in the vehicle. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact allison at 1-800-252-5283 or international at 1-800-448-7825.
NotesOwner notification is expected to begin during september 2000. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
SEATS
01V102000INTERNATIONAL TRUCK AND ENGINEfrom 09/05/1998 to 03/02/2001V (Vehicle)138904/20/2001MFRINTERNATIONAL TRUCK & ENGINE CORPORATION03/26/200103/29/2001
Defect SummaryVehicle description: heavy duty trucks equipped with bostrom driver seat models (910, 910sc, or 914) and international's parking brake code 04036. if someone outside the cab adjusts/slides the driver's seat to its most forward position, with the parking brake set, the seat will contact and release the parking brake lever.
Consequence SummaryIf the parking brake is accidentally released, the vehicle could move unexpectedly, increasing the risk of a crash.
Corrective SummaryDealers will install a stop-bracket on the seat track to limit the travel of the seat so that the seat can not release the parking brake lever. owner notification began april 20, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
NotesAlso contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
SERVICE BRAKES, AIR
03V137000INTERNATIONAL TRUCK & ENGINE CORPORATIONfrom 02/12/1998 to 01/28/2002V (Vehicle)281804/18/2003MFRINTERNATIONAL TRUCK & ENGINE CORPORATION04/03/200304/22/2003
Defect SummaryOn certain heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. with certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. the subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
Consequence SummaryIf the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
Corrective SummaryDealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. on a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. owner notification began on april 18, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
NotesInternational recall no.02506. customers can also contact the national highway traffic safety administration
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR
04V269000INTERNATIONAL TRUCK & ENGINE CORPORATIONfrom 02/28/1999 to 03/25/2004V (Vehicle)8188308/02/2004MFRINTERNATIONAL TRUCK & ENGINE CORPORATION06/03/200406/03/2004
Defect SummaryOn certain school buses and truck model vehicles manufactured between february 28, 1999, through april 5, 2004, the anti-lock brake system electronic control unit (ecu) may misinterpret a corrupt wheel speed signal.
Consequence SummaryThe corrupt wheel speed signals may improperly activate the abs, instead of deactivating the abs. this may result in the driver experiencing a hard pedal feel and a decrease in deceleration at the end of the stop, resulting in extended stopping distances which could cause a vehicle crash, possibly resulting in property damage, personal injury, or death.
Corrective SummaryInternational will notify its customers and inspect and repair the affected vehicles free of charge. the recall began august 1, 2004. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international customer service at 1-800-327-4236.
NotesAlso, customers can contact the national highway traffic safety administration
SERVICE BRAKES, AIR - SUPPLY - CHECK VALVE
02V135002INTERNATIONAL TRUCK AND ENGINEfrom 08/11/1997 to 01/28/2002V (Vehicle)10856011/11/2002MFRINTERNATIONAL TRUCK & ENGINE CORPORATION05/20/200209/06/2002
Defect SummaryOn certain medium and heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. with certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. the subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
Consequence SummaryIf the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
Corrective SummaryDealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. on a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. owner notification began september 11, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.
NotesAlso, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
02121809/01/2002635511On some vehicles, operating at high altitudes, the charge air cooler temperature tends to cause the viscous fan drives to engage late or at higher coolant temperatures. *tt10/24/2002
(PWS)
IK-040010706/04/201210044292International: after lining condition and wear have been verified on the brakes because of the chatter or squealing on the trucks. no model or model years are listed. *pe06/06/2012